Merge pull request 'Update .zshrc' (#1) from tphilippot-patch-1 into feat/noctalia

Reviewed-on: #1

.config/bat/config

@@ -0,0 +1 @@
+--theme=noctalia

.config/cava/config

@@ -0,0 +1,280 @@
+## Configuration file for CAVA.
+# Remove the ; to change parameters.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-512). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 0
+; bar_width = 2
+; bar_spacing = 1
+# bar_height is only used for output in "noritake" format
+; bar_height = 32
+
+# For SDL width and space between bars is in pixels, defaults are:
+; bar_width = 20
+; bar_spacing = 5
+
+# sdl_glsl have these default values, they are only used to calulate max number of bars.
+; bar_width = 1
+; bar_spacing = 0
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
+# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
+; sleep_timer = 0
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'fifo', 'portaudio', 'pipewire', 'alsa', 'pulse', 'sndio', 'oss', 'jack' or 'shmem'
+# Defaults to 'oss', 'pipewire', 'sndio', 'jack', 'pulse', 'alsa', 'portaudio' or 'fifo', in that order, dependent on what support cava was built with.
+# On Mac it defaults to 'portaudio' or 'fifo'
+# On windows this is automatic and no input settings are needed.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio and pipewire 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For pipewire 'source' will be the object name or object.serial of the device to capture from.
+# Both input and output devices are supported.
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
+#
+# For sndio 'source' will be a raw recording audio descriptor or a monitoring sub-device, e.g. 'rsnd/2' or 'snd/1'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for sndio.
+#
+# For oss 'source' will be the path to a audio device, e.g. '/dev/dsp2'. Default: '/dev/dsp', i.e. the default audio device.
+# README.md contains further information on how to setup CAVA for OSS on FreeBSD.
+#
+# For jack 'source' will be the name of the JACK server to connect to, e.g. 'foobar'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for JACK.
+#
+; method = pulse
+; source = auto
+
+; method = pipewire
+; source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+; method = shmem
+; source = /squeezelite-AA:BB:CC:DD:EE:FF
+
+; method = portaudio
+; source = auto
+
+; method = sndio
+; source = default
+
+; method = oss
+; source = /dev/dsp
+
+; method = jack
+; source = default
+
+# The options 'sample_rate', 'sample_bits', 'channels' and 'autoconnect' can be configured for some input methods:
+#   sample_rate: fifo, pipewire, sndio, oss
+#   sample_bits: fifo, pipewire, sndio, oss
+#   channels:    sndio, oss, jack
+#   autoconnect: jack
+# Other methods ignore these settings.
+#
+# For 'sndio' and 'oss' they are only preferred values, i.e. if the values are not supported
+# by the chosen audio device, the device will use other supported values instead.
+# Example: 48000, 32 and 2, but the device only supports 44100, 16 and 1, then it
+# will use 44100, 16 and 1.
+#
+; sample_rate = 44100
+; sample_bits = 16
+; channels = 2
+; autoconnect = 2
+
+
+[output]
+
+# Output method. Can be 'ncurses', 'noncurses', 'raw', 'noritake', 'sdl'
+# or 'sdl_glsl'.
+# 'noncurses' (default) uses a buffer and cursor movements to only print
+# changes from frame to frame in the terminal. Uses less resources and is less
+# prone to tearing (vsync issues) than 'ncurses'.
+#
+# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
+# stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+#
+# 'noritake' outputs a bitmap in the format expected by a Noritake VFD display
+#  in graphic mode. It only support the 3000 series graphical VFDs for now.
+#
+# 'sdl' uses the Simple DirectMedia Layer to render in a graphical context.
+# 'sdl_glsl' uses SDL to create an OpenGL context. Write your own shaders or
+# use one of the predefined ones.
+; method = noncurses
+
+# Orientation of the visualization. Can be 'bottom', 'top', 'left' or 'right'.
+# Default is 'bottom'. Other orientations are only supported on sdl and ncruses
+# output. Note: many fonts have weird glyphs for 'top' and 'right' characters,
+# which can make ncurses not look right.
+; orientation = bottom
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' outputs left to right lowest to highest frequencies.
+# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
+# set 'reverse' to 1 to display frequencies the other way around.
+; channels = stereo
+; mono_option = average
+; reverse = 0
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+# sdl window size and position. -1,-1 is centered.
+; sdl_width = 1000
+; sdl_height = 500
+; sdl_x = -1
+; sdl_y= -1
+; sdl_full_screen = 0
+
+# set label on bars on the x-axis. Can be 'frequency' or 'none'. Default: 'none'
+# 'frequency' displays the lower cut off frequency of the bar above.
+# Only supported on ncurses and noncurses output.
+; xaxis = none
+
+# enable alacritty synchronized updates. 1 = on, 0 = off
+# removes flickering in alacritty terminal emulator.
+# defaults to off since the behaviour in other terminal emulators is unknown
+; alacritty_sync = 0
+
+# Shaders for sdl_glsl, located in $HOME/.config/cava/shaders
+; vertex_shader = pass_through.vert
+; fragment_shader = bar_spectrum.frag
+
+; for glsl output mode, keep rendering even if no audio
+; continuous_rendering = 0
+
+# disable console blank (screen saver) in tty
+# (Not supported on FreeBSD)
+; disable_blanking = 0
+
+# show a flat bar at the bottom of the screen when idle, 1 = on, 0 = off
+; show_idle_bar_heads = 1
+
+# show waveform instead of frequency spectrum, 1 = on, 0 = off
+; waveform = 0
+
+[color]
+theme = "noctalia"
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
+# a terminal that can change color definitions such as Gnome-terminal or rxvt.
+# default is to keep current terminal color
+; background = default
+; foreground = default
+
+# SDL and sdl_glsl only support hex code colors, these are the default:
+; background = '#111111'
+; foreground = '#33ffff'
+
+
+# Gradient mode, only hex defined colors are supported,
+# background must also be defined in hex or remain commented out. 1 = on, 0 = off.
+# You can define as many as 8 different colors. They range from bottom to top of screen
+; gradient = 0
+; gradient_count = 8
+; gradient_color_1 = '#59cc33'
+; gradient_color_2 = '#80cc33'
+; gradient_color_3 = '#a6cc33'
+; gradient_color_4 = '#cccc33'
+; gradient_color_5 = '#cca633'
+; gradient_color_6 = '#cc8033'
+; gradient_color_7 = '#cc5933'
+; gradient_color_8 = '#cc3333'
+
+
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; integral = 77
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
+; monstercat = 0
+; waves = 0
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+# DEPRECATED as of 0.8.0
+; ignore = 0
+
+# Noise reduction, int 0 - 100. default 77
+# the raw visualization is very noisy, this factor adjusts the integral and gravity filters to keep the signal smooth
+# 100 will be very slow and smooth, 0 will be fast but noisy.
+; noise_reduction = 77
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more than one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble

.config/hypr/.gitignore

@@ -0,0 +1 @@
+

.config/hypr/.luarc.json

@@ -0,0 +1,10 @@
+{
+  "workspace": {
+    "library": [
+      "/usr/share/hypr/stubs"
+    ]
+  },
+  "diagnostics": {
+    "globals": ["hl"]
+  }
+}

.config/hypr/custom/autostart.lua

@@ -0,0 +1,6 @@
+-- User-specific autostart. Loaded after hyprland/autostart.lua.
+
+hl.on("hyprland.start", function()
+  hl.exec_cmd("dbus-update-activation-environment --systemd --all")
+  hl.exec_cmd("systemctl --user start hyprland-session.target")
+end)

.config/hypr/custom/environments.lua

@@ -0,0 +1 @@
+-- User-specific environment variables. Loaded after hyprland/environments.lua.

.config/hypr/custom/inputs.lua

@@ -0,0 +1,3 @@
+-- User-specific input config (kb_layout, per-device, gestures). Loaded after hyprland/inputs.lua.
+
+hl.device({ name = "logitech-g-pro--1", sensitivity = -0.8 })

.config/hypr/custom/keybinds.lua

@@ -0,0 +1 @@
+-- User-specific keybinds. Loaded after hyprland/keybinds.lua.

.config/hypr/custom/monitors.lua

@@ -0,0 +1,6 @@
+-- User-specific monitor overrides. Loaded after hyprland/monitors.lua.
+
+hl.monitor({ output = "eDP-1", mode = "2256x1504@60", position = "auto", scale = 1.33, bitdepth = 10, vrr = 1 })
+hl.monitor({ output = "DP-3", mode = "3440x1440@99", position = "auto", scale = 1, bitdepth = 10, vrr = 1 })
+hl.monitor({ output = "DP-4", mode = "4096x2160@120", position = "auto", scale = 1.33, bitdepth = 10, vrr = 1 })
+

.config/hypr/custom/windowrules.lua

@@ -0,0 +1,2 @@
+-- User-specific windowrules. Loaded after hyprland/windowrules.lua.
+require("custom/windowrules/godot")

.config/hypr/custom/windowrules/godot.lua

@@ -0,0 +1,51 @@
+-- Godot application windowrules --
+
+hl.window_rule({
+	name = "Resize Godot confirmation dialogs",
+	match = {
+		class = "org.godotengine.Editor",
+		float = true,
+	},
+	size = { "monitor_w * 0.15", "monitor_h * 0.1" },
+	center = true,
+})
+
+hl.window_rule({
+    name = "Resize New node dialog",
+    match = {
+        class = "org.godotengine.Editor",
+        title = "Créer un nouveau Node",
+    },
+    size = { 1000, 750 },
+})
+
+hl.window_rule({
+    name = "Resize Region edit dialog",
+    match = {
+        class = "org.godotengine.Editor",
+        title = "Éditeur de régions",
+    },
+    size = { 1500, 1000 },
+})
+
+hl.window_rule({
+    name = "Resize Region edit dialog",
+    match = {
+        class = "org.godotengine.Editor",
+        title = "Sélectionner une scène",
+    },
+    size = { 550, 450 },
+})
+
+
+
+hl.window_rule({
+	name = "Floating DEBUG window",
+	match = {
+		class = "org.godotengine.Editor",
+		title = ".*DEBUG.*",
+	},
+	size = { 1280, 720 },
+	float = true,
+	center = true,
+})

.config/hypr/custom/workspacerules.lua

@@ -0,0 +1,4 @@
+hl.workspace_rule({ workspace = "1", monitor = "eDP-1", persistent = true, default_name = "web" })
+--hl.workspace_rule({ workspace = "2", monitor = "eDP-1", persistent = true, default_name = "code" })
+-- hl.workspace_rule({ workspace = "3", monitor = "eDP-1", persistent = true, default_name = "chat" })
+-- hl.workspace_rule({ workspace = "4", monitor = "eDP-1", persistent = true, default_name = "game" })

.config/hypr/hyprland.lua

@@ -0,0 +1,30 @@
+-- ##############################################################
+-- MY SUPER HYPRLAND CONFIG.
+-- https://wiki.hypr.land/Configuring/
+--
+-- Do not edit files in `hyprland/` (shared defaults across all
+-- users). Put any changes in the matching file under `custom/`,
+-- which is loaded after and overrides the defaults.
+-- ##############################################################
+
+-- Defaults (do not edit) --
+require("hyprland/monitors")
+require("hyprland/environments")
+require("hyprland/autostart")
+require("hyprland/permissions")
+require("hyprland/look-and-feel")
+require("hyprland/inputs")
+require("hyprland/keybinds")
+require("hyprland/windowrules")
+
+-- Custom --
+require("custom/autostart")
+require("custom/monitors")
+require("custom/environments")
+require("custom/inputs")
+require("custom/keybinds")
+require("custom/windowrules")
+require("custom/workspacerules")
+
+-- For Noctalia Color templates
+require("noctalia").apply_theme()

.config/hypr/hyprland/autostart.lua

@@ -0,0 +1,6 @@
+-- https://wiki.hypr.land/Configuring/Autostart/
+-- Shared defaults — do not edit. Add user-specific autostart in custom/autostart.lua.
+
+hl.on("hyprland.start", function()
+  hl.exec_cmd("noctalia")
+end)

.config/hypr/hyprland/environments.lua

@@ -0,0 +1,2 @@
+-- https://wiki.hypr.land/Configuring/Environment-variables/
+-- Shared defaults — do not edit. Add user-specific env vars in custom/environments.lua.

.config/hypr/hyprland/inputs.lua

@@ -0,0 +1,20 @@
+-- https://wiki.hypr.land/Configuring/Variables/#input
+-- Shared defaults — do not edit. Add user-specific input config in custom/inputs.lua.
+
+hl.config({
+  input = {
+    kb_layout = "fr",
+    kb_variant = "",
+    kb_model = "",
+    kb_options = "",
+    kb_rules = "",
+    follow_mouse = 1,
+    sensitivity = 0,
+    touchpad = {
+      natural_scroll = false,
+    },
+  },
+})
+
+-- https://wiki.hypr.land/Configuring/Gestures
+hl.gesture({ fingers = 3, direction = "horizontal", action = "workspace" })

.config/hypr/hyprland/keybinds.lua

@@ -0,0 +1,99 @@
+-- https://wiki.hypr.land/Configuring/Binds/
+-- Shared defaults — do not edit. Add user-specific keybindings in custom/keybinds.lua.
+
+local mainMod = "SUPER"
+local terminal = "kitty"
+local fileMgr = "nautilus"
+local ipc = "noctalia msg"
+
+hl.bind("CTRL + ALT + T", hl.dsp.exec_cmd(terminal))
+hl.bind(mainMod .. " + C", hl.dsp.window.close())
+hl.bind(mainMod .. " + M", hl.dsp.exit())
+hl.bind(mainMod .. " + E", hl.dsp.exec_cmd(fileMgr))
+hl.bind(mainMod .. " + V", hl.dsp.window.float({ action = "toggle" }))
+hl.bind(mainMod .. " + F", hl.dsp.window.fullscreen({ mode = "maximized", state = "toggle" }))
+hl.bind(mainMod .. " + CTRL + F", hl.dsp.window.fullscreen({ mode = "fullscreen", state = "toggle" }))
+hl.bind(mainMod .. " + P", hl.dsp.window.pseudo())
+hl.bind(mainMod .. " + U", hl.dsp.layout("togglesplit"))
+hl.bind(mainMod .. " + H", hl.dsp.layout("swapsplit"))
+
+-- Focus: arrow keys + IJKL
+for _, m in ipairs({
+	{ "left", "l" },
+	{ "right", "r" },
+	{ "up", "u" },
+	{ "down", "d" },
+	{ "J", "l" },
+	{ "L", "r" },
+	{ "I", "u" },
+	{ "K", "d" },
+}) do
+	hl.bind(mainMod .. " + " .. m[1], hl.dsp.focus({ direction = m[2] }))
+end
+
+-- Workspaces 1..10: digit + AZERTY keysym, plus SHIFT to move active window
+local azerty = {
+	"ampersand",
+	"eacute",
+	"quotedbl",
+	"apostrophe",
+	"parenleft",
+	"minus",
+	"egrave",
+	"underscore",
+	"ccedilla",
+	"agrave",
+}
+for i = 1, 10 do
+	local digit = (i == 10) and "0" or tostring(i)
+	hl.bind(mainMod .. " + " .. digit, hl.dsp.focus({ workspace = i }))
+	hl.bind(mainMod .. " + " .. azerty[i], hl.dsp.focus({ workspace = i }))
+	hl.bind(mainMod .. " + SHIFT + " .. azerty[i], hl.dsp.window.move({ workspace = i }))
+end
+
+-- Mouse scroll between workspaces
+hl.bind(mainMod .. " + mouse_down", hl.dsp.focus({ workspace = "e+1" }))
+hl.bind(mainMod .. " + mouse_up", hl.dsp.focus({ workspace = "e-1" }))
+
+-- Mouse drag / resize
+hl.bind(mainMod .. " + mouse:272", hl.dsp.window.drag(), { mouse = true })
+hl.bind(mainMod .. " + mouse:273", hl.dsp.window.resize(), { mouse = true })
+
+-- Volume / brightness
+for _, b in ipairs({
+	{ "XF86AudioRaiseVolume", "wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+" },
+	{ "XF86AudioLowerVolume", "wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-" },
+	{ "XF86AudioMute", "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle" },
+	{ "XF86AudioMicMute", "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle" },
+	{ "XF86MonBrightnessUp", "brightnessctl -e4 -n2 set 5%+" },
+	{ "XF86MonBrightnessDown", "brightnessctl -e4 -n2 set 5%-" },
+}) do
+	hl.bind(b[1], hl.dsp.exec_cmd(b[2]), { locked = true, repeating = true })
+end
+
+-- Media player
+for _, b in ipairs({
+	{ "XF86AudioNext", "playerctl next" },
+	{ "XF86AudioPause", "playerctl play-pause" },
+	{ "XF86AudioPlay", "playerctl play-pause" },
+	{ "XF86AudioPrev", "playerctl previous" },
+}) do
+	hl.bind(b[1], hl.dsp.exec_cmd(b[2]), { locked = true })
+end
+
+-- Screenshot
+-- hl.bind("Print", hl.dsp.exec_cmd("hyprshot -m region"), { locked = true })
+-- hl.bind("CTRL + Print", hl.dsp.exec_cmd("hyprshot -m output -m active"), { locked = true })
+
+hl.bind("XF86Calculator", hl.dsp.exec_cmd("gnome-calculator"))
+
+-- Noctalia IPC
+hl.bind(mainMod .. " + SPACE", hl.dsp.exec_cmd(ipc .. " panel-toggle launcher"))
+hl.bind(mainMod .. " + S", hl.dsp.exec_cmd(ipc .. " panel-toggle control-center"))
+hl.bind(mainMod .. " + T", hl.dsp.exec_cmd(ipc .. " theme-mode-toggle"))
+hl.bind(mainMod .. " + W", hl.dsp.exec_cmd(ipc .. " panel-toggle noctalia/wallhaven:browser"))
+hl.bind(mainMod .. " + SHIFT + L", hl.dsp.exec_cmd(ipc .. " session lock"))
+hl.bind("switch:Lid Switch", hl.dsp.exec_cmd(ipc .. " session lock"), { locked = true })
+hl.bind(mainMod .. " + R", hl.dsp.exec_cmd(ipc .. " plugin noctalia/screen_recorder:service all toggle"))
+hl.bind("Print", hl.dsp.exec_cmd(ipc .. " screenshot-region"), { locked = true })
+hl.bind("CTRL + Print", hl.dsp.exec_cmd(ipc .. " screenshot-fullscreen pick"))

.config/hypr/hyprland/look-and-feel.lua

@@ -0,0 +1,87 @@
+-- https://wiki.hypr.land/Configuring/Variables/
+-- Shared defaults — do not edit. No custom/look-and-feel.lua override exists; add one if needed.
+
+hl.config({
+  general = {
+    gaps_in  = 5,
+    gaps_out = 10,
+    border_size = 2,
+    col = {
+      active_border   = { colors = {"rgba(33ccffee)", "rgba(00ff99ee)"}, angle = 45 },
+      inactive_border = "rgba(595959aa)",
+    },
+    resize_on_border = false,
+    allow_tearing = false,
+    layout = "dwindle",
+  },
+
+  decoration = {
+    rounding       = 12,
+    rounding_power = 2,
+    active_opacity   = 1.0,
+    inactive_opacity = 1.0,
+    shadow = {
+      enabled = true,
+      range = 30,
+      render_power = 5,
+      offset = "0 5",
+      color = "rgba(00000070)",
+    },
+    blur = {
+      enabled = false,
+      size = 3,
+      passes = 1,
+      vibrancy = 0.1696,
+    },
+  },
+
+  animations = {
+    enabled = true,
+  },
+
+  dwindle = {
+    preserve_split = true,
+  },
+
+  master = {
+    new_status = "master",
+    mfact = 0.5,
+  },
+
+  scrolling = {
+    fullscreen_on_one_column = true,
+  },
+
+  misc = {
+    disable_splash_rendering = true,
+    force_default_wallpaper = 0,
+    disable_hyprland_logo = true,
+  },
+
+  xwayland = {
+    force_zero_scaling = true,
+  },
+})
+
+-- Default curves and animations. See https://wiki.hypr.land/Configuring/Animations/
+hl.curve("easeOutQuint",   { type = "bezier", points = { {0.23, 1},    {0.32, 1} } })
+hl.curve("easeInOutCubic", { type = "bezier", points = { {0.65, 0.05}, {0.36, 1} } })
+hl.curve("linear",         { type = "bezier", points = { {0, 0},       {1, 1}    } })
+hl.curve("almostLinear",   { type = "bezier", points = { {0.5, 0.5},   {0.75, 1} } })
+hl.curve("quick",          { type = "bezier", points = { {0.15, 0},    {0.1, 1}  } })
+hl.curve("easy",           { type = "spring", mass = 1, stiffness = 71.2633, dampening = 15.8273644 })
+
+hl.animation({ leaf = "global",        enabled = true, speed = 10,   bezier = "default" })
+hl.animation({ leaf = "border",        enabled = true, speed = 5.39, bezier = "easeOutQuint" })
+hl.animation({ leaf = "windows",       enabled = true, speed = 4.79, spring = "easy" })
+hl.animation({ leaf = "windowsIn",     enabled = true, speed = 4.1,  spring = "easy",         style = "popin 87%" })
+hl.animation({ leaf = "windowsOut",    enabled = true, speed = 1.49, bezier = "linear",       style = "popin 87%" })
+hl.animation({ leaf = "fadeIn",        enabled = true, speed = 1.73, bezier = "almostLinear" })
+hl.animation({ leaf = "fadeOut",       enabled = true, speed = 1.46, bezier = "almostLinear" })
+hl.animation({ leaf = "fade",          enabled = true, speed = 3.03, bezier = "quick" })
+hl.animation({ leaf = "layers",        enabled = true, speed = 3.81, bezier = "easeOutQuint" })
+hl.animation({ leaf = "layersIn",      enabled = true, speed = 4,    bezier = "easeOutQuint", style = "fade" })
+hl.animation({ leaf = "layersOut",     enabled = true, speed = 1.5,  bezier = "linear",       style = "fade" })
+hl.animation({ leaf = "fadeLayersIn",  enabled = true, speed = 1.79, bezier = "almostLinear" })
+hl.animation({ leaf = "fadeLayersOut", enabled = true, speed = 1.39, bezier = "almostLinear" })
+hl.animation({ leaf = "zoomFactor",    enabled = true, speed = 7,    bezier = "quick" })

.config/hypr/hyprland/monitors.lua

@@ -0,0 +1,4 @@
+-- https://wiki.hypr.land/Configuring/Monitors/
+-- Shared defaults — do not edit. Add user-specific monitor config in custom/monitors.lua.
+
+hl.monitor({ output = "", mode = "preferred", position = "auto", scale = "auto" })

.config/hypr/hyprland/permissions.lua

@@ -0,0 +1,9 @@
+-- https://wiki.hypr.land/Configuring/Permissions/
+-- Shared defaults — do not edit. No custom/permissions.lua override exists; add one if needed.
+-- Permission changes require a Hyprland restart, not a reload.
+
+-- hl.config({ ecosystem = { enforce_permissions = 1 } })
+
+-- hl.permission({ path = "/usr/(bin|local/bin)/grim", capability = "screencopy", action = "allow" })
+-- hl.permission({ path = "/usr/(lib|libexec|lib64)/xdg-desktop-portal-hyprland", capability = "screencopy", action = "allow" })
+-- hl.permission({ path = "/usr/(bin|local/bin)/hyprpm", capability = "plugin", action = "allow" })

.config/hypr/hyprland/windowrules.lua

@@ -0,0 +1,42 @@
+-- https://wiki.hypr.land/Configuring/Window-Rules/
+-- Shared defaults — do not edit. Add user-specific window rules in custom/windowrules.lua.
+
+hl.window_rule({
+	name = "floating-window",
+	match = { class = "(Imprimer l'image|org.gnome.Calculator|org.gnome.Loupe)" },
+	float = true,
+})
+
+hl.window_rule({
+	name = "kitty-term",
+	match = { class = "kitty" },
+	size = "995 600",
+	float = true,
+	center = true,
+})
+
+hl.window_rule({
+	name = "floating-messages",
+	match = { class = "(signal|org.telegram.desktop)" },
+	size = "425 790",
+	move = "(monitor_w*0.72) (monitor_h*0.15)",
+	float = true,
+	pin = true,
+})
+
+hl.window_rule({
+	name = "filesystems",
+	match = { class = "DevTools|Tous les fichiers|org.gnome.Nautilus" },
+	float = true,
+	center = true,
+	size = "(monitor_w*0.48) (monitor_h*0.5)",
+})
+
+hl.window_rule({
+	name = "pip",
+	match = { class = "zen", title = "Picture-in-Picture" },
+	center = true,
+	size = "1280 720",
+	float = true,
+	pin = true,
+})

.config/kitty/kitty.conf

@@ -0,0 +1,22 @@
+font_family FiraCode Nerd Font
+bold_font        auto
+italic_font      auto
+bold_italic_font auto
+font_size 12.0
+
+window_padding_width 4
+
+enable_audio_bell = no
+remember_window_size no
+cursor_trail 10
+
+tab_bar_min_tabs  1
+tab_bar_edge  bottom
+tab_bar_style powerline
+tab_powerline_style slanted
+
+# OS Window titlebar colors
+# wayland_titlebar_color system
+# macos_titlebar_color system
+
+include themes/noctalia.conf

.config/lf/colors

@@ -0,0 +1,174 @@
+# vim:ft=dircolors
+# (This is not a dircolors file but it helps to highlight colors and comments)
+
+# default values from dircolors
+# (entries with a leading # are not implemented in lf)
+# #no     00              # NORMAL
+# fi      00              # FILE
+# #rs     0               # RESET
+# di      01;34           # DIR
+# ln      01;36           # LINK
+# #mh     00              # MULTIHARDLINK
+# pi      40;33           # FIFO
+# so      01;35           # SOCK
+# #do     01;35           # DOOR
+# bd      40;33;01        # BLK
+# cd      40;33;01        # CHR
+# or      40;31;01        # ORPHAN
+# #mi     00              # MISSING
+# su      37;41           # SETUID
+# sg      30;43           # SETGID
+# #ca     30;41           # CAPABILITY
+# tw      30;42           # STICKY_OTHER_WRITABLE
+# ow      34;42           # OTHER_WRITABLE
+# st      37;44           # STICKY
+# ex      01;32           # EXEC
+
+# default values from lf (with matching order)
+# ln      01;36   # LINK
+# or      31;01   # ORPHAN
+# tw      01;34   # STICKY_OTHER_WRITABLE
+# ow      01;34   # OTHER_WRITABLE
+# st      01;34   # STICKY
+# di      01;34   # DIR
+# pi      33      # FIFO
+# so      01;35   # SOCK
+# bd      33;01   # BLK
+# cd      33;01   # CHR
+# su      01;32   # SETUID
+# sg      01;32   # SETGID
+# ex      01;32   # EXEC
+# fi      00      # FILE
+
+# file types (with matching order)
+ln      01;36   # LINK
+or      31;01   # ORPHAN
+tw      34      # STICKY_OTHER_WRITABLE
+ow      34      # OTHER_WRITABLE
+st      01;34   # STICKY
+di      01;34   # DIR
+pi      33      # FIFO
+so      01;35   # SOCK
+bd      33;01   # BLK
+cd      33;01   # CHR
+su      01;32   # SETUID
+sg      01;32   # SETGID
+ex      01;32   # EXEC
+fi      00      # FILE
+
+# archives or compressed (dircolors defaults)
+*.tar   01;31
+*.tgz   01;31
+*.arc   01;31
+*.arj   01;31
+*.taz   01;31
+*.lha   01;31
+*.lz4   01;31
+*.lzh   01;31
+*.lzma  01;31
+*.tlz   01;31
+*.txz   01;31
+*.tzo   01;31
+*.t7z   01;31
+*.zip   01;31
+*.z     01;31
+*.dz    01;31
+*.gz    01;31
+*.lrz   01;31
+*.lz    01;31
+*.lzo   01;31
+*.xz    01;31
+*.zst   01;31
+*.tzst  01;31
+*.bz2   01;31
+*.bz    01;31
+*.tbz   01;31
+*.tbz2  01;31
+*.tz    01;31
+*.deb   01;31
+*.rpm   01;31
+*.jar   01;31
+*.war   01;31
+*.ear   01;31
+*.sar   01;31
+*.rar   01;31
+*.alz   01;31
+*.ace   01;31
+*.zoo   01;31
+*.cpio  01;31
+*.7z    01;31
+*.rz    01;31
+*.cab   01;31
+*.wim   01;31
+*.swm   01;31
+*.dwm   01;31
+*.esd   01;31
+
+# image formats (dircolors defaults)
+*.jpg   01;35
+*.jpeg  01;35
+*.mjpg  01;35
+*.mjpeg 01;35
+*.gif   01;35
+*.bmp   01;35
+*.pbm   01;35
+*.pgm   01;35
+*.ppm   01;35
+*.tga   01;35
+*.xbm   01;35
+*.xpm   01;35
+*.tif   01;35
+*.tiff  01;35
+*.png   01;35
+*.svg   01;35
+*.svgz  01;35
+*.mng   01;35
+*.pcx   01;35
+*.mov   01;35
+*.mpg   01;35
+*.mpeg  01;35
+*.m2v   01;35
+*.mkv   01;35
+*.webm  01;35
+*.ogm   01;35
+*.mp4   01;35
+*.m4v   01;35
+*.mp4v  01;35
+*.vob   01;35
+*.qt    01;35
+*.nuv   01;35
+*.wmv   01;35
+*.asf   01;35
+*.rm    01;35
+*.rmvb  01;35
+*.flc   01;35
+*.avi   01;35
+*.fli   01;35
+*.flv   01;35
+*.gl    01;35
+*.dl    01;35
+*.xcf   01;35
+*.xwd   01;35
+*.yuv   01;35
+*.cgm   01;35
+*.emf   01;35
+*.ogv   01;35
+*.ogx   01;35
+
+# audio formats (dircolors defaults)
+*.aac   00;36
+*.au    00;36
+*.flac  00;36
+*.m4a   00;36
+*.mid   00;36
+*.midi  00;36
+*.mka   00;36
+*.mp3   00;36
+*.mpc   00;36
+*.ogg   00;36
+*.ra    00;36
+*.wav   00;36
+*.oga   00;36
+*.opus  00;36
+*.spx   00;36
+*.xspf  00;36

.config/lf/icons

@@ -0,0 +1,377 @@
+# vim:ft=conf
+
+# These examples require Nerd Fonts or a compatible font to be used.
+# See https://www.nerdfonts.com for more information.
+
+# default values from lf (with matching order)
+# ln      l       # LINK
+# or      l       # ORPHAN
+# tw      t       # STICKY_OTHER_WRITABLE
+# ow      d       # OTHER_WRITABLE
+# st      t       # STICKY
+# di      d       # DIR
+# pi      p       # FIFO
+# so      s       # SOCK
+# bd      b       # BLK
+# cd      c       # CHR
+# su      u       # SETUID
+# sg      g       # SETGID
+# ex      x       # EXEC
+# fi      -       # FILE
+
+# file types (with matching order)
+ln             # LINK
+or             # ORPHAN
+tw      t       # STICKY_OTHER_WRITABLE
+ow             # OTHER_WRITABLE
+st      t       # STICKY
+di             # DIR
+pi      p       # FIFO
+so      s       # SOCK
+bd      b       # BLK
+cd      c       # CHR
+su      u       # SETUID
+sg      g       # SETGID
+ex             # EXEC
+fi             # FILE
+
+# disable some default filetype icons, let them choose icon by filename
+# ln             # LINK
+# or             # ORPHAN
+# tw              # STICKY_OTHER_WRITABLE
+# ow              # OTHER_WRITABLE
+# st              # STICKY
+# di             # DIR
+# pi              # FIFO
+# so              # SOCK
+# bd              # BLK
+# cd              # CHR
+# su              # SETUID
+# sg              # SETGID
+# ex              # EXEC
+# fi             # FILE
+
+# file extensions (vim-devicons)
+*.styl          
+*.sass          
+*.scss          
+*.htm           
+*.html          
+*.slim          
+*.haml          
+*.ejs           
+*.css           
+*.less          
+*.md            
+*.mdx           
+*.markdown      
+*.rmd           
+*.json          
+*.webmanifest   
+*.js            
+*.mjs           
+*.jsx           
+*.rb            
+*.gemspec       
+*.rake          
+*.php           
+*.py            
+*.pyc           
+*.pyo           
+*.pyd           
+*.coffee        
+*.mustache      
+*.hbs           
+*.conf          
+*.ini           
+*.yml           
+*.yaml          
+*.toml          
+*.bat           
+*.mk            
+*.jpg           
+*.jpeg          
+*.bmp           
+*.png           
+*.webp          
+*.gif           
+*.ico           
+*.twig          
+*.cpp           
+*.c++           
+*.cxx           
+*.cc            
+*.cp            
+*.c             
+*.cs            󰌛
+*.h             
+*.hh            
+*.hpp           
+*.hxx           
+*.hs            
+*.lhs           
+*.nix           
+*.lua           
+*.java          
+*.sh            
+*.fish          
+*.bash          
+*.zsh           
+*.ksh           
+*.csh           
+*.awk           
+*.ps1           
+*.ml            λ
+*.mli           λ
+*.diff          
+*.db            
+*.sql           
+*.dump          
+*.clj           
+*.cljc          
+*.cljs          
+*.edn           
+*.scala         
+*.go            
+*.dart          
+*.xul           
+*.sln           
+*.suo           
+*.pl            
+*.pm            
+*.t             
+*.rss           
+'*.f#'          
+*.fsscript      
+*.fsx           
+*.fs            
+*.fsi           
+*.rs            
+*.rlib          
+*.d             
+*.erl           
+*.hrl           
+*.ex            
+*.exs           
+*.eex           
+*.leex          
+*.heex          
+*.vim           
+*.ai            
+*.psd           
+*.psb           
+*.ts            
+*.tsx           
+*.jl            
+*.pp            
+*.vue           
+*.elm           
+*.swift         
+*.xcplayground  
+*.tex           󰙩
+*.r             󰟔
+*.rproj         󰗆
+*.sol           󰡪
+*.pem           
+
+# file names (vim-devicons) (case-insensitive not supported in lf)
+*gruntfile.coffee       
+*gruntfile.js           
+*gruntfile.ls           
+*gulpfile.coffee        
+*gulpfile.js            
+*gulpfile.ls            
+*mix.lock               
+*dropbox                
+*.ds_store              
+*.gitconfig             
+*.gitignore             
+*.gitattributes         
+*.gitlab-ci.yml         
+*.bashrc                
+*.zshrc                 
+*.zshenv                
+*.zprofile              
+*.vimrc                 
+*.gvimrc                
+*_vimrc                 
+*_gvimrc                
+*.bashprofile           
+*favicon.ico            
+*license                
+*node_modules           
+*react.jsx              
+*procfile               
+*dockerfile             
+*docker-compose.yml     
+*docker-compose.yaml    
+*compose.yml            
+*compose.yaml           
+*rakefile               
+*config.ru              
+*gemfile                
+*makefile               
+*cmakelists.txt         
+*robots.txt             󰚩
+
+# file names (case-sensitive adaptations)
+*Gruntfile.coffee       
+*Gruntfile.js           
+*Gruntfile.ls           
+*Gulpfile.coffee        
+*Gulpfile.js            
+*Gulpfile.ls            
+*Dropbox                
+*.DS_Store              
+*LICENSE                
+*React.jsx              
+*Procfile               
+*Dockerfile             
+*Docker-compose.yml     
+*Docker-compose.yaml    
+*Rakefile               
+*Gemfile                
+*Makefile               
+*CMakeLists.txt         
+
+# file patterns (vim-devicons) (patterns not supported in lf)
+# .*jquery.*\.js$         
+# .*angular.*\.js$        
+# .*backbone.*\.js$       
+# .*require.*\.js$        
+# .*materialize.*\.js$    
+# .*materialize.*\.css$   
+# .*mootools.*\.js$       
+# .*vimrc.*               
+# Vagrantfile$            
+
+# file patterns (file name adaptations)
+*jquery.min.js          
+*angular.min.js         
+*backbone.min.js        
+*require.min.js         
+*materialize.min.js     
+*materialize.min.css    
+*mootools.min.js        
+*vimrc                  
+Vagrantfile             
+
+# archives or compressed (extensions from dircolors defaults)
+*.tar   
+*.tgz   
+*.arc   
+*.arj   
+*.taz   
+*.lha   
+*.lz4   
+*.lzh   
+*.lzma  
+*.tlz   
+*.txz   
+*.tzo   
+*.t7z   
+*.zip   
+*.z     
+*.dz    
+*.gz    
+*.lrz   
+*.lz    
+*.lzo   
+*.xz    
+*.zst   
+*.tzst  
+*.bz2   
+*.bz    
+*.tbz   
+*.tbz2  
+*.tz    
+*.deb   
+*.rpm   
+*.jar   
+*.war   
+*.ear   
+*.sar   
+*.rar   
+*.alz   
+*.ace   
+*.zoo   
+*.cpio  
+*.7z    
+*.rz    
+*.cab   
+*.wim   
+*.swm   
+*.dwm   
+*.esd   
+
+# image formats (extensions from dircolors defaults)
+*.jpg   
+*.jpeg  
+*.mjpg  
+*.mjpeg 
+*.gif   
+*.bmp   
+*.pbm   
+*.pgm   
+*.ppm   
+*.tga   
+*.xbm   
+*.xpm   
+*.tif   
+*.tiff  
+*.png   
+*.svg   
+*.svgz  
+*.mng   
+*.pcx   
+*.mov   
+*.mpg   
+*.mpeg  
+*.m2v   
+*.mkv   
+*.webm  
+*.ogm   
+*.mp4   
+*.m4v   
+*.mp4v  
+*.vob   
+*.qt    
+*.nuv   
+*.wmv   
+*.asf   
+*.rm    
+*.rmvb  
+*.flc   
+*.avi   
+*.fli   
+*.flv   
+*.gl    
+*.dl    
+*.xcf   
+*.xwd   
+*.yuv   
+*.cgm   
+*.emf   
+*.ogv   
+*.ogx   
+
+# audio formats (extensions from dircolors defaults)
+*.aac   
+*.au    
+*.flac  
+*.m4a   
+*.mid   
+*.midi  
+*.mka   
+*.mp3   
+*.mpc   
+*.ogg   
+*.ra    
+*.wav   
+*.oga   
+*.opus  
+*.spx   
+*.xspf  
+
+# other formats
+*.pdf   

.config/lf/lfrc

@@ -0,0 +1,6 @@
+set icons true
+set previewer ~/.config/lf/scripts/lfpreview
+cmd on-select &{{
+  exec lf -remote 'redraw'
+}}
+

.config/lf/scripts/lfpreview

@@ -0,0 +1,26 @@
+#!/bin/sh
+draw() {
+  kitten icat --stdin no --transfer-mode memory \
+    --place "${w}x${h}@${x}x${y}" "$1" </dev/null >/dev/tty
+}
+
+file="$1"
+w="$2"
+h="$3"
+x="$4"
+y="$5"
+
+case "$(file -Lb --mime-type "$file")" in
+image/*)
+  draw "$file"
+  ;;
+application/pdf)
+  pdftoppm -f 1 -singlefile "$file" "/tmp/lfoutput"
+  draw "/tmp/lfoutput.ppm"
+  ;;
+*)
+  bat --color=always "$1"
+  ;;
+esac
+
+exit 1 # do not cache

.config/nvim/init.lua

@@ -0,0 +1,3 @@
+-- bootstrap lazy.nvim, LazyVim and your plugins
+require("config.lazy")
+

.config/obs-studio/themes/Catppuccin_Frappe.ovt

@@ -0,0 +1,324 @@
+@OBSThemeMeta {
+    name: 'Frappe';
+    id: 'com.obsproject.Catppuccin.Frappe';
+    extends: 'com.obsproject.Catppuccin';
+    author: 'Xurdejl';
+    dark: 'true';
+}
+
+@OBSThemeVars {
+    --ctp_rosewater: #f2d5cf;
+    --ctp_flamingo: #eebebe;
+    --ctp_pink: #f4b8e4;
+    --ctp_mauve: #ca9ee6;
+    --ctp_red: #e78284;
+    --ctp_maroon: #ea999c;
+    --ctp_peach: #ef9f76;
+    --ctp_yellow: #e5c890;
+    --ctp_green: #a6d189;
+    --ctp_teal: #81c8be;
+    --ctp_sky: #99d1db;
+    --ctp_sapphire: #85c1dc;
+    --ctp_blue: #8caaee;
+    --ctp_lavender: #babbf1;
+    --ctp_text: #c6d0f5;
+    --ctp_subtext1: #b5bfe2;
+    --ctp_subtext0: #a5adce;
+    --ctp_overlay2: #949cbb;
+    --ctp_overlay1: #838ba7;
+    --ctp_overlay0: #737994;
+    --ctp_surface2: #626880;
+    --ctp_surface1: #51576d;
+    --ctp_surface0: #414559;
+    --ctp_base: #303446;
+    --ctp_mantle: #292c3c;
+    --ctp_crust: #232634;
+    --ctp_selection_background: #44495d;
+}
+
+VolumeMeter {
+    qproperty-foregroundNominalColor: #7cbc52;
+    qproperty-foregroundWarningColor: #e76f33;
+    qproperty-foregroundErrorColor: #db4346;
+}
+
+/* Context Menu */
+QMenu::right-arrow {
+    image: url(theme:Dark/expand.svg);
+}
+
+/* Dock Widget */
+QDockWidget {
+    titlebar-close-icon: url(theme:Dark/close.svg);
+    titlebar-normal-icon: url(theme:Dark/popout.svg);
+}
+
+/* Source Context Bar */
+QPushButton#sourcePropertiesButton {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+QPushButton#sourceFiltersButton {
+    qproperty-icon: url(theme:Dark/filter.svg);
+}
+
+/* Scenes and Sources toolbar */
+* [themeID="addIconSmall"] {
+    qproperty-icon: url(theme:Dark/plus.svg);
+}
+
+* [themeID="removeIconSmall"] {
+    qproperty-icon: url(theme:Dark/trash.svg);
+}
+
+* [themeID="clearIconSmall"] {
+    qproperty-icon: url(theme:Dark/entry-clear.svg);
+}
+
+* [themeID="propertiesIconSmall"] {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+* [themeID="configIconSmall"] {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+* [themeID="menuIconSmall"] {
+    qproperty-icon: url(theme:Dark/dots-vert.svg);
+}
+
+* [themeID="refreshIconSmall"] {
+    qproperty-icon: url(theme:Dark/refresh.svg);
+}
+
+* [themeID="cogsIcon"] {
+    qproperty-icon: url(theme:Dark/cogs.svg);
+}
+
+#sourceInteractButton {
+    qproperty-icon: url(theme:Dark/interact.svg);
+}
+
+* [themeID="upArrowIconSmall"] {
+    qproperty-icon: url(theme:Dark/up.svg);
+}
+
+* [themeID="downArrowIconSmall"] {
+    qproperty-icon: url(theme:Dark/down.svg);
+}
+
+* [themeID="pauseIconSmall"] {
+    qproperty-icon: url(theme:Dark/media-pause.svg);
+}
+
+* [themeID="filtersIcon"] {
+    qproperty-icon: url(theme:Dark/filter.svg);
+}
+
+QToolBarExtension {
+    qproperty-icon: url(theme:Dark/dots-vert.svg);
+}
+
+/* ComboBox */
+QComboBox::down-arrow,
+QDateTimeEdit::down-arrow {
+    image: url(theme:Dark/collapse.svg);
+}
+
+QComboBox::down-arrow:editable,
+QDateTimeEdit::down-arrow:editable {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Spinbox and doubleSpinbox */
+QSpinBox::up-arrow,
+QDoubleSpinBox::up-arrow {
+    image: url(theme:Dark/up.svg);
+}
+
+QSpinBox::down-arrow,
+QDoubleSpinBox::down-arrow {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Buttons */
+QPushButton::menu-indicator {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Settings Icons */
+OBSBasicSettings {
+    qproperty-generalIcon: url(theme:Dark/settings/general.svg);
+    qproperty-appearanceIcon: url(theme:Dark/settings/appearance.svg);
+    qproperty-streamIcon: url(theme:Dark/settings/stream.svg);
+    qproperty-outputIcon: url(theme:Dark/settings/output.svg);
+    qproperty-audioIcon: url(theme:Dark/settings/audio.svg);
+    qproperty-videoIcon: url(theme:Dark/settings/video.svg);
+    qproperty-hotkeysIcon: url(theme:Dark/settings/hotkeys.svg);
+    qproperty-accessibilityIcon: url(theme:Dark/settings/accessibility.svg);
+    qproperty-advancedIcon: url(theme:Dark/settings/advanced.svg);
+}
+
+/* Checkboxes */
+QCheckBox::indicator:unchecked,
+QGroupBox::indicator:unchecked {
+    image: url(theme:Yami/checkbox_unchecked.svg);
+}
+
+QCheckBox::indicator:unchecked:hover,
+QGroupBox::indicator:unchecked:hover {
+    border: none;
+    image: url(theme:Yami/checkbox_unchecked_focus.svg);
+}
+
+QCheckBox::indicator:checked,
+QGroupBox::indicator:checked {
+    image: url(theme:Yami/checkbox_checked.svg);
+}
+
+QCheckBox::indicator:checked:hover,
+QGroupBox::indicator:checked:hover {
+    image: url(theme:Yami/checkbox_checked_focus.svg);
+}
+
+QCheckBox::indicator:checked:disabled,
+QGroupBox::indicator:checked:disabled {
+    image: url(theme:Yami/checkbox_checked_disabled.svg);
+}
+
+/* Locked CheckBox */
+QCheckBox[lockCheckBox=true]::indicator:checked,
+QCheckBox[lockCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Dark/locked.svg);
+}
+
+/* Visibility CheckBox */
+QCheckBox[visibilityCheckBox=true]::indicator:checked,
+QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Dark/visible.svg);
+}
+
+* [themeID="revertIcon"] {
+    qproperty-icon: url(theme:Dark/revert.svg);
+}
+
+/* Mute CheckBox */
+MuteCheckBox::indicator:checked {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:indeterminate {
+    image: url(theme:Dark/unassigned.svg);
+}
+
+MuteCheckBox::indicator:unchecked {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:hover {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:focus {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:checked:hover {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:focus {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:disabled {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:unchecked:disabled {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+/* Sources List Group Collapse Checkbox */
+QCheckBox[sourceTreeSubItem=true]::indicator:checked,
+QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
+    image: url(theme:Dark/expand.svg);
+}
+
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
+    image: url(theme:Dark/collapse.svg);
+}
+
+/* Source Icons */
+OBSBasic {
+    qproperty-imageIcon: url(theme:Dark/sources/image.svg);
+    qproperty-colorIcon: url(theme:Dark/sources/brush.svg);
+    qproperty-slideshowIcon: url(theme:Dark/sources/slideshow.svg);
+    qproperty-audioInputIcon: url(theme:Dark/sources/microphone.svg);
+    qproperty-audioOutputIcon: url(theme:Dark/settings/audio.svg);
+    qproperty-desktopCapIcon: url(theme:Dark/settings/video.svg);
+    qproperty-windowCapIcon: url(theme:Dark/sources/window.svg);
+    qproperty-gameCapIcon: url(theme:Dark/sources/gamepad.svg);
+    qproperty-cameraIcon: url(theme:Dark/sources/camera.svg);
+    qproperty-textIcon: url(theme:Dark/sources/text.svg);
+    qproperty-mediaIcon: url(theme:Dark/sources/media.svg);
+    qproperty-browserIcon: url(theme:Dark/sources/globe.svg);
+    qproperty-groupIcon: url(theme:Dark/sources/group.svg);
+    qproperty-sceneIcon: url(theme:Dark/sources/scene.svg);
+    qproperty-defaultIcon: url(theme:Dark/sources/default.svg);
+    qproperty-audioProcessOutputIcon: url(theme:Dark/sources/windowaudio.svg);
+}
+
+/* Save icon */
+* [themeID="replayIconSmall"] {
+    qproperty-icon: url(theme:Dark/save.svg);
+}
+
+/* Media icons */
+* [themeID="playIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_play.svg);
+}
+
+* [themeID="pauseIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_pause.svg);
+}
+
+* [themeID="restartIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_restart.svg);
+}
+
+* [themeID="stopIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_stop.svg);
+}
+
+* [themeID="nextIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_next.svg);
+}
+
+* [themeID="previousIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_previous.svg);
+}
+
+/* YouTube Integration */
+OBSYoutubeActions {
+    qproperty-thumbPlaceholder: url(theme:Dark/sources/image.svg);
+}
+
+/* Calendar Widget */
+QDateTimeEdit::down-arrow {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Calendar Top Bar Buttons */
+#qt_calendar_monthbutton::menu-indicator {
+    image: url(theme:Dark/down.svg);
+}
+
+QCalendarWidget #qt_calendar_prevmonth {
+    qproperty-icon: url(theme:Dark/left.svg);
+}
+
+QCalendarWidget #qt_calendar_nextmonth {
+    qproperty-icon: url(theme:Dark/right.svg);
+}

.config/obs-studio/themes/Catppuccin_Latte.ovt

@@ -0,0 +1,324 @@
+@OBSThemeMeta {
+    name: 'Latte';
+    id: 'com.obsproject.Catppuccin.Latte';
+    extends: 'com.obsproject.Catppuccin';
+    author: 'Xurdejl';
+    dark: 'false';
+}
+
+@OBSThemeVars {
+    --ctp_rosewater: #dc8a78;
+    --ctp_flamingo: #dd7878;
+    --ctp_pink: #ea76cb;
+    --ctp_mauve: #8839ef;
+    --ctp_red: #d20f39;
+    --ctp_maroon: #e64553;
+    --ctp_peach: #fe640b;
+    --ctp_yellow: #df8e1d;
+    --ctp_green: #40a02b;
+    --ctp_teal: #179299;
+    --ctp_sky: #04a5e5;
+    --ctp_sapphire: #209fb5;
+    --ctp_blue: #1e66f5;
+    --ctp_lavender: #7287fd;
+    --ctp_text: #4c4f69;
+    --ctp_subtext1: #5c5f77;
+    --ctp_subtext0: #6c6f85;
+    --ctp_overlay2: #7c7f93;
+    --ctp_overlay1: #8c8fa1;
+    --ctp_overlay0: #9ca0b0;
+    --ctp_surface2: #acb0be;
+    --ctp_surface1: #bcc0cc;
+    --ctp_surface0: #ccd0da;
+    --ctp_base: #eff1f5;
+    --ctp_mantle: #e6e9ef;
+    --ctp_crust: #dce0e8;
+    --ctp_selection_background: #d4d7df;
+}
+
+VolumeMeter {
+    qproperty-foregroundNominalColor: #62ce4a;
+    qproperty-foregroundWarningColor: #fe9558;
+    qproperty-foregroundErrorColor: #f13d64;
+}
+
+/* Context Menu */
+QMenu::right-arrow {
+    image: url(theme:Light/expand.svg);
+}
+
+/* Dock Widget */
+QDockWidget {
+    titlebar-close-icon: url(theme:Light/close.svg);
+    titlebar-normal-icon: url(theme:Light/popout.svg);
+}
+
+/* Source Context Bar */
+QPushButton#sourcePropertiesButton {
+    qproperty-icon: url(theme:Light/settings/general.svg);
+}
+
+QPushButton#sourceFiltersButton {
+    qproperty-icon: url(theme:Light/filter.svg);
+}
+
+/* Scenes and Sources toolbar */
+* [themeID="addIconSmall"] {
+    qproperty-icon: url(theme:Light/plus.svg);
+}
+
+* [themeID="removeIconSmall"] {
+    qproperty-icon: url(theme:Light/trash.svg);
+}
+
+* [themeID="clearIconSmall"] {
+    qproperty-icon: url(theme:Light/entry-clear.svg);
+}
+
+* [themeID="propertiesIconSmall"] {
+    qproperty-icon: url(theme:Light/settings/general.svg);
+}
+
+* [themeID="configIconSmall"] {
+    qproperty-icon: url(theme:Light/settings/general.svg);
+}
+
+* [themeID="menuIconSmall"] {
+    qproperty-icon: url(theme:Light/dots-vert.svg);
+}
+
+* [themeID="refreshIconSmall"] {
+    qproperty-icon: url(theme:Light/refresh.svg);
+}
+
+* [themeID="cogsIcon"] {
+    qproperty-icon: url(theme:Light/cogs.svg);
+}
+
+#sourceInteractButton {
+    qproperty-icon: url(theme:Light/interact.svg);
+}
+
+* [themeID="upArrowIconSmall"] {
+    qproperty-icon: url(theme:Light/up.svg);
+}
+
+* [themeID="downArrowIconSmall"] {
+    qproperty-icon: url(theme:Light/down.svg);
+}
+
+* [themeID="pauseIconSmall"] {
+    qproperty-icon: url(theme:Light/media-pause.svg);
+}
+
+* [themeID="filtersIcon"] {
+    qproperty-icon: url(theme:Light/filter.svg);
+}
+
+QToolBarExtension {
+    qproperty-icon: url(theme:Light/dots-vert.svg);
+}
+
+/* ComboBox */
+QComboBox::down-arrow,
+QDateTimeEdit::down-arrow {
+    image: url(theme:Light/collapse.svg);
+}
+
+QComboBox::down-arrow:editable,
+QDateTimeEdit::down-arrow:editable {
+    image: url(theme:Light/down.svg);
+}
+
+/* Spinbox and doubleSpinbox */
+QSpinBox::up-arrow,
+QDoubleSpinBox::up-arrow {
+    image: url(theme:Light/up.svg);
+}
+
+QSpinBox::down-arrow,
+QDoubleSpinBox::down-arrow {
+    image: url(theme:Light/down.svg);
+}
+
+/* Buttons */
+QPushButton::menu-indicator {
+    image: url(theme:Light/down.svg);
+}
+
+/* Settings Icons */
+OBSBasicSettings {
+    qproperty-generalIcon: url(theme:Light/settings/general.svg);
+    qproperty-appearanceIcon: url(theme:Light/settings/appearance.svg);
+    qproperty-streamIcon: url(theme:Light/settings/stream.svg);
+    qproperty-outputIcon: url(theme:Light/settings/output.svg);
+    qproperty-audioIcon: url(theme:Light/settings/audio.svg);
+    qproperty-videoIcon: url(theme:Light/settings/video.svg);
+    qproperty-hotkeysIcon: url(theme:Light/settings/hotkeys.svg);
+    qproperty-accessibilityIcon: url(theme:Light/settings/accessibility.svg);
+    qproperty-advancedIcon: url(theme:Light/settings/advanced.svg);
+}
+
+/* Checkboxes */
+QCheckBox::indicator:unchecked,
+QGroupBox::indicator:unchecked {
+    image: url(theme:Light/checkbox_unchecked.svg);
+}
+
+QCheckBox::indicator:unchecked:hover,
+QGroupBox::indicator:unchecked:hover {
+    border: none;
+    image: url(theme:Light/checkbox_unchecked_focus.svg);
+}
+
+QCheckBox::indicator:checked,
+QGroupBox::indicator:checked {
+    image: url(theme:Light/checkbox_checked.svg);
+}
+
+QCheckBox::indicator:checked:hover,
+QGroupBox::indicator:checked:hover {
+    image: url(theme:Light/checkbox_checked_focus.svg);
+}
+
+QCheckBox::indicator:checked:disabled,
+QGroupBox::indicator:checked:disabled {
+    image: url(theme:Light/checkbox_checked_disabled.svg);
+}
+
+/* Locked CheckBox */
+QCheckBox[lockCheckBox=true]::indicator:checked,
+QCheckBox[lockCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Light/locked.svg);
+}
+
+/* Visibility CheckBox */
+QCheckBox[visibilityCheckBox=true]::indicator:checked,
+QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Light/visible.svg);
+}
+
+* [themeID="revertIcon"] {
+    qproperty-icon: url(theme:Light/revert.svg);
+}
+
+/* Mute CheckBox */
+MuteCheckBox::indicator:checked {
+    image: url(theme:Light/mute.svg);
+}
+
+MuteCheckBox::indicator:indeterminate {
+    image: url(theme:Light/unassigned.svg);
+}
+
+MuteCheckBox::indicator:unchecked {
+    image: url(theme:Light/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:hover {
+    image: url(theme:Light/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:focus {
+    image: url(theme:Light/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:checked:hover {
+    image: url(theme:Light/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:focus {
+    image: url(theme:Light/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:disabled {
+    image: url(theme:Light/mute.svg);
+}
+
+MuteCheckBox::indicator:unchecked:disabled {
+    image: url(theme:Light/settings/audio.svg);
+}
+
+/* Sources List Group Collapse Checkbox */
+QCheckBox[sourceTreeSubItem=true]::indicator:checked,
+QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
+    image: url(theme:Light/expand.svg);
+}
+
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
+    image: url(theme:Light/collapse.svg);
+}
+
+/* Source Icons */
+OBSBasic {
+    qproperty-imageIcon: url(theme:Light/sources/image.svg);
+    qproperty-colorIcon: url(theme:Light/sources/brush.svg);
+    qproperty-slideshowIcon: url(theme:Light/sources/slideshow.svg);
+    qproperty-audioInputIcon: url(theme:Light/sources/microphone.svg);
+    qproperty-audioOutputIcon: url(theme:Light/settings/audio.svg);
+    qproperty-desktopCapIcon: url(theme:Light/settings/video.svg);
+    qproperty-windowCapIcon: url(theme:Light/sources/window.svg);
+    qproperty-gameCapIcon: url(theme:Light/sources/gamepad.svg);
+    qproperty-cameraIcon: url(theme:Light/sources/camera.svg);
+    qproperty-textIcon: url(theme:Light/sources/text.svg);
+    qproperty-mediaIcon: url(theme:Light/sources/media.svg);
+    qproperty-browserIcon: url(theme:Light/sources/globe.svg);
+    qproperty-groupIcon: url(theme:Light/sources/group.svg);
+    qproperty-sceneIcon: url(theme:Light/sources/scene.svg);
+    qproperty-defaultIcon: url(theme:Light/sources/default.svg);
+    qproperty-audioProcessOutputIcon: url(theme:Light/sources/windowaudio.svg);
+}
+
+/* Save icon */
+* [themeID="replayIconSmall"] {
+    qproperty-icon: url(theme:Light/save.svg);
+}
+
+/* Media icons */
+* [themeID="playIcon"] {
+    qproperty-icon: url(theme:Light/media/media_play.svg);
+}
+
+* [themeID="pauseIcon"] {
+    qproperty-icon: url(theme:Light/media/media_pause.svg);
+}
+
+* [themeID="restartIcon"] {
+    qproperty-icon: url(theme:Light/media/media_restart.svg);
+}
+
+* [themeID="stopIcon"] {
+    qproperty-icon: url(theme:Light/media/media_stop.svg);
+}
+
+* [themeID="nextIcon"] {
+    qproperty-icon: url(theme:Light/media/media_next.svg);
+}
+
+* [themeID="previousIcon"] {
+    qproperty-icon: url(theme:Light/media/media_previous.svg);
+}
+
+/* YouTube Integration */
+OBSYoutubeActions {
+    qproperty-thumbPlaceholder: url(theme:Light/sources/image.svg);
+}
+
+/* Calendar Widget */
+QDateTimeEdit::down-arrow {
+    image: url(theme:Light/down.svg);
+}
+
+/* Calendar Top Bar Buttons */
+#qt_calendar_monthbutton::menu-indicator {
+    image: url(theme:Light/down.svg);
+}
+
+QCalendarWidget #qt_calendar_prevmonth {
+    qproperty-icon: url(theme:Light/left.svg);
+}
+
+QCalendarWidget #qt_calendar_nextmonth {
+    qproperty-icon: url(theme:Light/right.svg);
+}

.config/obs-studio/themes/Catppuccin_Macchiato.ovt

@@ -0,0 +1,324 @@
+@OBSThemeMeta {
+    name: 'Macchiato';
+    id: 'com.obsproject.Catppuccin.Macchiato';
+    extends: 'com.obsproject.Catppuccin';
+    author: 'Xurdejl';
+    dark: 'true';
+}
+
+@OBSThemeVars {
+    --ctp_rosewater: #f4dbd6;
+    --ctp_flamingo: #f0c6c6;
+    --ctp_pink: #f5bde6;
+    --ctp_mauve: #c6a0f6;
+    --ctp_red: #ed8796;
+    --ctp_maroon: #ee99a0;
+    --ctp_peach: #f5a97f;
+    --ctp_yellow: #eed49f;
+    --ctp_green: #a6da95;
+    --ctp_teal: #8bd5ca;
+    --ctp_sky: #91d7e3;
+    --ctp_sapphire: #7dc4e4;
+    --ctp_blue: #8aadf4;
+    --ctp_lavender: #b7bdf8;
+    --ctp_text: #cad3f5;
+    --ctp_subtext1: #b8c0e0;
+    --ctp_subtext0: #a5adcb;
+    --ctp_overlay2: #939ab7;
+    --ctp_overlay1: #8087a2;
+    --ctp_overlay0: #6e738d;
+    --ctp_surface2: #5b6078;
+    --ctp_surface1: #494d64;
+    --ctp_surface0: #363a4f;
+    --ctp_base: #24273a;
+    --ctp_mantle: #1e2030;
+    --ctp_crust: #181926;
+    --ctp_selection_background: #3a3d53;
+}
+
+VolumeMeter {
+    qproperty-foregroundNominalColor: #78c75d;
+    qproperty-foregroundWarningColor: #ef7939;
+    qproperty-foregroundErrorColor: #e3455d;
+}
+
+/* Context Menu */
+QMenu::right-arrow {
+    image: url(theme:Dark/expand.svg);
+}
+
+/* Dock Widget */
+QDockWidget {
+    titlebar-close-icon: url(theme:Dark/close.svg);
+    titlebar-normal-icon: url(theme:Dark/popout.svg);
+}
+
+/* Source Context Bar */
+QPushButton#sourcePropertiesButton {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+QPushButton#sourceFiltersButton {
+    qproperty-icon: url(theme:Dark/filter.svg);
+}
+
+/* Scenes and Sources toolbar */
+* [themeID="addIconSmall"] {
+    qproperty-icon: url(theme:Dark/plus.svg);
+}
+
+* [themeID="removeIconSmall"] {
+    qproperty-icon: url(theme:Dark/trash.svg);
+}
+
+* [themeID="clearIconSmall"] {
+    qproperty-icon: url(theme:Dark/entry-clear.svg);
+}
+
+* [themeID="propertiesIconSmall"] {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+* [themeID="configIconSmall"] {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+* [themeID="menuIconSmall"] {
+    qproperty-icon: url(theme:Dark/dots-vert.svg);
+}
+
+* [themeID="refreshIconSmall"] {
+    qproperty-icon: url(theme:Dark/refresh.svg);
+}
+
+* [themeID="cogsIcon"] {
+    qproperty-icon: url(theme:Dark/cogs.svg);
+}
+
+#sourceInteractButton {
+    qproperty-icon: url(theme:Dark/interact.svg);
+}
+
+* [themeID="upArrowIconSmall"] {
+    qproperty-icon: url(theme:Dark/up.svg);
+}
+
+* [themeID="downArrowIconSmall"] {
+    qproperty-icon: url(theme:Dark/down.svg);
+}
+
+* [themeID="pauseIconSmall"] {
+    qproperty-icon: url(theme:Dark/media-pause.svg);
+}
+
+* [themeID="filtersIcon"] {
+    qproperty-icon: url(theme:Dark/filter.svg);
+}
+
+QToolBarExtension {
+    qproperty-icon: url(theme:Dark/dots-vert.svg);
+}
+
+/* ComboBox */
+QComboBox::down-arrow,
+QDateTimeEdit::down-arrow {
+    image: url(theme:Dark/collapse.svg);
+}
+
+QComboBox::down-arrow:editable,
+QDateTimeEdit::down-arrow:editable {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Spinbox and doubleSpinbox */
+QSpinBox::up-arrow,
+QDoubleSpinBox::up-arrow {
+    image: url(theme:Dark/up.svg);
+}
+
+QSpinBox::down-arrow,
+QDoubleSpinBox::down-arrow {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Buttons */
+QPushButton::menu-indicator {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Settings Icons */
+OBSBasicSettings {
+    qproperty-generalIcon: url(theme:Dark/settings/general.svg);
+    qproperty-appearanceIcon: url(theme:Dark/settings/appearance.svg);
+    qproperty-streamIcon: url(theme:Dark/settings/stream.svg);
+    qproperty-outputIcon: url(theme:Dark/settings/output.svg);
+    qproperty-audioIcon: url(theme:Dark/settings/audio.svg);
+    qproperty-videoIcon: url(theme:Dark/settings/video.svg);
+    qproperty-hotkeysIcon: url(theme:Dark/settings/hotkeys.svg);
+    qproperty-accessibilityIcon: url(theme:Dark/settings/accessibility.svg);
+    qproperty-advancedIcon: url(theme:Dark/settings/advanced.svg);
+}
+
+/* Checkboxes */
+QCheckBox::indicator:unchecked,
+QGroupBox::indicator:unchecked {
+    image: url(theme:Yami/checkbox_unchecked.svg);
+}
+
+QCheckBox::indicator:unchecked:hover,
+QGroupBox::indicator:unchecked:hover {
+    border: none;
+    image: url(theme:Yami/checkbox_unchecked_focus.svg);
+}
+
+QCheckBox::indicator:checked,
+QGroupBox::indicator:checked {
+    image: url(theme:Yami/checkbox_checked.svg);
+}
+
+QCheckBox::indicator:checked:hover,
+QGroupBox::indicator:checked:hover {
+    image: url(theme:Yami/checkbox_checked_focus.svg);
+}
+
+QCheckBox::indicator:checked:disabled,
+QGroupBox::indicator:checked:disabled {
+    image: url(theme:Yami/checkbox_checked_disabled.svg);
+}
+
+/* Locked CheckBox */
+QCheckBox[lockCheckBox=true]::indicator:checked,
+QCheckBox[lockCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Dark/locked.svg);
+}
+
+/* Visibility CheckBox */
+QCheckBox[visibilityCheckBox=true]::indicator:checked,
+QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Dark/visible.svg);
+}
+
+* [themeID="revertIcon"] {
+    qproperty-icon: url(theme:Dark/revert.svg);
+}
+
+/* Mute CheckBox */
+MuteCheckBox::indicator:checked {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:indeterminate {
+    image: url(theme:Dark/unassigned.svg);
+}
+
+MuteCheckBox::indicator:unchecked {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:hover {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:focus {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:checked:hover {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:focus {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:disabled {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:unchecked:disabled {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+/* Sources List Group Collapse Checkbox */
+QCheckBox[sourceTreeSubItem=true]::indicator:checked,
+QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
+    image: url(theme:Dark/expand.svg);
+}
+
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
+    image: url(theme:Dark/collapse.svg);
+}
+
+/* Source Icons */
+OBSBasic {
+    qproperty-imageIcon: url(theme:Dark/sources/image.svg);
+    qproperty-colorIcon: url(theme:Dark/sources/brush.svg);
+    qproperty-slideshowIcon: url(theme:Dark/sources/slideshow.svg);
+    qproperty-audioInputIcon: url(theme:Dark/sources/microphone.svg);
+    qproperty-audioOutputIcon: url(theme:Dark/settings/audio.svg);
+    qproperty-desktopCapIcon: url(theme:Dark/settings/video.svg);
+    qproperty-windowCapIcon: url(theme:Dark/sources/window.svg);
+    qproperty-gameCapIcon: url(theme:Dark/sources/gamepad.svg);
+    qproperty-cameraIcon: url(theme:Dark/sources/camera.svg);
+    qproperty-textIcon: url(theme:Dark/sources/text.svg);
+    qproperty-mediaIcon: url(theme:Dark/sources/media.svg);
+    qproperty-browserIcon: url(theme:Dark/sources/globe.svg);
+    qproperty-groupIcon: url(theme:Dark/sources/group.svg);
+    qproperty-sceneIcon: url(theme:Dark/sources/scene.svg);
+    qproperty-defaultIcon: url(theme:Dark/sources/default.svg);
+    qproperty-audioProcessOutputIcon: url(theme:Dark/sources/windowaudio.svg);
+}
+
+/* Save icon */
+* [themeID="replayIconSmall"] {
+    qproperty-icon: url(theme:Dark/save.svg);
+}
+
+/* Media icons */
+* [themeID="playIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_play.svg);
+}
+
+* [themeID="pauseIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_pause.svg);
+}
+
+* [themeID="restartIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_restart.svg);
+}
+
+* [themeID="stopIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_stop.svg);
+}
+
+* [themeID="nextIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_next.svg);
+}
+
+* [themeID="previousIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_previous.svg);
+}
+
+/* YouTube Integration */
+OBSYoutubeActions {
+    qproperty-thumbPlaceholder: url(theme:Dark/sources/image.svg);
+}
+
+/* Calendar Widget */
+QDateTimeEdit::down-arrow {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Calendar Top Bar Buttons */
+#qt_calendar_monthbutton::menu-indicator {
+    image: url(theme:Dark/down.svg);
+}
+
+QCalendarWidget #qt_calendar_prevmonth {
+    qproperty-icon: url(theme:Dark/left.svg);
+}
+
+QCalendarWidget #qt_calendar_nextmonth {
+    qproperty-icon: url(theme:Dark/right.svg);
+}

.config/obs-studio/themes/Catppuccin_Mocha.ovt

@@ -0,0 +1,324 @@
+@OBSThemeMeta {
+    name: 'Mocha';
+    id: 'com.obsproject.Catppuccin.Mocha';
+    extends: 'com.obsproject.Catppuccin';
+    author: 'Xurdejl';
+    dark: 'true';
+}
+
+@OBSThemeVars {
+    --ctp_rosewater: #f5e0dc;
+    --ctp_flamingo: #f2cdcd;
+    --ctp_pink: #f5c2e7;
+    --ctp_mauve: #cba6f7;
+    --ctp_red: #f38ba8;
+    --ctp_maroon: #eba0ac;
+    --ctp_peach: #fab387;
+    --ctp_yellow: #f9e2af;
+    --ctp_green: #a6e3a1;
+    --ctp_teal: #94e2d5;
+    --ctp_sky: #89dceb;
+    --ctp_sapphire: #74c7ec;
+    --ctp_blue: #89b4fa;
+    --ctp_lavender: #b4befe;
+    --ctp_text: #cdd6f4;
+    --ctp_subtext1: #bac2de;
+    --ctp_subtext0: #a6adc8;
+    --ctp_overlay2: #9399b2;
+    --ctp_overlay1: #7f849c;
+    --ctp_overlay0: #6c7086;
+    --ctp_surface2: #585b70;
+    --ctp_surface1: #45475a;
+    --ctp_surface0: #313244;
+    --ctp_base: #1e1e2e;
+    --ctp_mantle: #181825;
+    --ctp_crust: #11111b;
+    --ctp_selection_background: #353649;
+}
+
+VolumeMeter {
+    qproperty-foregroundNominalColor: #6fd266;
+    qproperty-foregroundWarningColor: #f7853f;
+    qproperty-foregroundErrorColor: #ec4675;
+}
+
+/* Context Menu */
+QMenu::right-arrow {
+    image: url(theme:Dark/expand.svg);
+}
+
+/* Dock Widget */
+QDockWidget {
+    titlebar-close-icon: url(theme:Dark/close.svg);
+    titlebar-normal-icon: url(theme:Dark/popout.svg);
+}
+
+/* Source Context Bar */
+QPushButton#sourcePropertiesButton {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+QPushButton#sourceFiltersButton {
+    qproperty-icon: url(theme:Dark/filter.svg);
+}
+
+/* Scenes and Sources toolbar */
+* [themeID="addIconSmall"] {
+    qproperty-icon: url(theme:Dark/plus.svg);
+}
+
+* [themeID="removeIconSmall"] {
+    qproperty-icon: url(theme:Dark/trash.svg);
+}
+
+* [themeID="clearIconSmall"] {
+    qproperty-icon: url(theme:Dark/entry-clear.svg);
+}
+
+* [themeID="propertiesIconSmall"] {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+* [themeID="configIconSmall"] {
+    qproperty-icon: url(theme:Dark/settings/general.svg);
+}
+
+* [themeID="menuIconSmall"] {
+    qproperty-icon: url(theme:Dark/dots-vert.svg);
+}
+
+* [themeID="refreshIconSmall"] {
+    qproperty-icon: url(theme:Dark/refresh.svg);
+}
+
+* [themeID="cogsIcon"] {
+    qproperty-icon: url(theme:Dark/cogs.svg);
+}
+
+#sourceInteractButton {
+    qproperty-icon: url(theme:Dark/interact.svg);
+}
+
+* [themeID="upArrowIconSmall"] {
+    qproperty-icon: url(theme:Dark/up.svg);
+}
+
+* [themeID="downArrowIconSmall"] {
+    qproperty-icon: url(theme:Dark/down.svg);
+}
+
+* [themeID="pauseIconSmall"] {
+    qproperty-icon: url(theme:Dark/media-pause.svg);
+}
+
+* [themeID="filtersIcon"] {
+    qproperty-icon: url(theme:Dark/filter.svg);
+}
+
+QToolBarExtension {
+    qproperty-icon: url(theme:Dark/dots-vert.svg);
+}
+
+/* ComboBox */
+QComboBox::down-arrow,
+QDateTimeEdit::down-arrow {
+    image: url(theme:Dark/collapse.svg);
+}
+
+QComboBox::down-arrow:editable,
+QDateTimeEdit::down-arrow:editable {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Spinbox and doubleSpinbox */
+QSpinBox::up-arrow,
+QDoubleSpinBox::up-arrow {
+    image: url(theme:Dark/up.svg);
+}
+
+QSpinBox::down-arrow,
+QDoubleSpinBox::down-arrow {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Buttons */
+QPushButton::menu-indicator {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Settings Icons */
+OBSBasicSettings {
+    qproperty-generalIcon: url(theme:Dark/settings/general.svg);
+    qproperty-appearanceIcon: url(theme:Dark/settings/appearance.svg);
+    qproperty-streamIcon: url(theme:Dark/settings/stream.svg);
+    qproperty-outputIcon: url(theme:Dark/settings/output.svg);
+    qproperty-audioIcon: url(theme:Dark/settings/audio.svg);
+    qproperty-videoIcon: url(theme:Dark/settings/video.svg);
+    qproperty-hotkeysIcon: url(theme:Dark/settings/hotkeys.svg);
+    qproperty-accessibilityIcon: url(theme:Dark/settings/accessibility.svg);
+    qproperty-advancedIcon: url(theme:Dark/settings/advanced.svg);
+}
+
+/* Checkboxes */
+QCheckBox::indicator:unchecked,
+QGroupBox::indicator:unchecked {
+    image: url(theme:Yami/checkbox_unchecked.svg);
+}
+
+QCheckBox::indicator:unchecked:hover,
+QGroupBox::indicator:unchecked:hover {
+    border: none;
+    image: url(theme:Yami/checkbox_unchecked_focus.svg);
+}
+
+QCheckBox::indicator:checked,
+QGroupBox::indicator:checked {
+    image: url(theme:Yami/checkbox_checked.svg);
+}
+
+QCheckBox::indicator:checked:hover,
+QGroupBox::indicator:checked:hover {
+    image: url(theme:Yami/checkbox_checked_focus.svg);
+}
+
+QCheckBox::indicator:checked:disabled,
+QGroupBox::indicator:checked:disabled {
+    image: url(theme:Yami/checkbox_checked_disabled.svg);
+}
+
+/* Locked CheckBox */
+QCheckBox[lockCheckBox=true]::indicator:checked,
+QCheckBox[lockCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Dark/locked.svg);
+}
+
+/* Visibility CheckBox */
+QCheckBox[visibilityCheckBox=true]::indicator:checked,
+QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Dark/visible.svg);
+}
+
+* [themeID="revertIcon"] {
+    qproperty-icon: url(theme:Dark/revert.svg);
+}
+
+/* Mute CheckBox */
+MuteCheckBox::indicator:checked {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:indeterminate {
+    image: url(theme:Dark/unassigned.svg);
+}
+
+MuteCheckBox::indicator:unchecked {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:hover {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:focus {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:checked:hover {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:focus {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:disabled {
+    image: url(theme:Dark/mute.svg);
+}
+
+MuteCheckBox::indicator:unchecked:disabled {
+    image: url(theme:Dark/settings/audio.svg);
+}
+
+/* Sources List Group Collapse Checkbox */
+QCheckBox[sourceTreeSubItem=true]::indicator:checked,
+QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
+    image: url(theme:Dark/expand.svg);
+}
+
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
+    image: url(theme:Dark/collapse.svg);
+}
+
+/* Source Icons */
+OBSBasic {
+    qproperty-imageIcon: url(theme:Dark/sources/image.svg);
+    qproperty-colorIcon: url(theme:Dark/sources/brush.svg);
+    qproperty-slideshowIcon: url(theme:Dark/sources/slideshow.svg);
+    qproperty-audioInputIcon: url(theme:Dark/sources/microphone.svg);
+    qproperty-audioOutputIcon: url(theme:Dark/settings/audio.svg);
+    qproperty-desktopCapIcon: url(theme:Dark/settings/video.svg);
+    qproperty-windowCapIcon: url(theme:Dark/sources/window.svg);
+    qproperty-gameCapIcon: url(theme:Dark/sources/gamepad.svg);
+    qproperty-cameraIcon: url(theme:Dark/sources/camera.svg);
+    qproperty-textIcon: url(theme:Dark/sources/text.svg);
+    qproperty-mediaIcon: url(theme:Dark/sources/media.svg);
+    qproperty-browserIcon: url(theme:Dark/sources/globe.svg);
+    qproperty-groupIcon: url(theme:Dark/sources/group.svg);
+    qproperty-sceneIcon: url(theme:Dark/sources/scene.svg);
+    qproperty-defaultIcon: url(theme:Dark/sources/default.svg);
+    qproperty-audioProcessOutputIcon: url(theme:Dark/sources/windowaudio.svg);
+}
+
+/* Save icon */
+* [themeID="replayIconSmall"] {
+    qproperty-icon: url(theme:Dark/save.svg);
+}
+
+/* Media icons */
+* [themeID="playIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_play.svg);
+}
+
+* [themeID="pauseIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_pause.svg);
+}
+
+* [themeID="restartIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_restart.svg);
+}
+
+* [themeID="stopIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_stop.svg);
+}
+
+* [themeID="nextIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_next.svg);
+}
+
+* [themeID="previousIcon"] {
+    qproperty-icon: url(theme:Dark/media/media_previous.svg);
+}
+
+/* YouTube Integration */
+OBSYoutubeActions {
+    qproperty-thumbPlaceholder: url(theme:Dark/sources/image.svg);
+}
+
+/* Calendar Widget */
+QDateTimeEdit::down-arrow {
+    image: url(theme:Dark/down.svg);
+}
+
+/* Calendar Top Bar Buttons */
+#qt_calendar_monthbutton::menu-indicator {
+    image: url(theme:Dark/down.svg);
+}
+
+QCalendarWidget #qt_calendar_prevmonth {
+    qproperty-icon: url(theme:Dark/left.svg);
+}
+
+QCalendarWidget #qt_calendar_nextmonth {
+    qproperty-icon: url(theme:Dark/right.svg);
+}

.config/obs-studio/themes/Theme.ovt

@@ -0,0 +1,324 @@
+@OBSThemeMeta {
+    name: 'Latte';
+    id: 'com.obsproject.Catppuccin.Latte';
+    extends: 'com.obsproject.Catppuccin';
+    author: 'Xurdejl';
+    dark: 'false';
+}
+
+@OBSThemeVars {
+    --ctp_rosewater: #dc8a78;
+    --ctp_flamingo: #dd7878;
+    --ctp_pink: #ea76cb;
+    --ctp_mauve: #8839ef;
+    --ctp_red: #d20f39;
+    --ctp_maroon: #e64553;
+    --ctp_peach: #fe640b;
+    --ctp_yellow: #df8e1d;
+    --ctp_green: #40a02b;
+    --ctp_teal: #179299;
+    --ctp_sky: #04a5e5;
+    --ctp_sapphire: #209fb5;
+    --ctp_blue: #1e66f5;
+    --ctp_lavender: #7287fd;
+    --ctp_text: #4c4f69;
+    --ctp_subtext1: #5c5f77;
+    --ctp_subtext0: #6c6f85;
+    --ctp_overlay2: #7c7f93;
+    --ctp_overlay1: #8c8fa1;
+    --ctp_overlay0: #9ca0b0;
+    --ctp_surface2: #acb0be;
+    --ctp_surface1: #bcc0cc;
+    --ctp_surface0: #ccd0da;
+    --ctp_base: #eff1f5;
+    --ctp_mantle: #e6e9ef;
+    --ctp_crust: #dce0e8;
+    --ctp_selection_background: #d4d7df;
+}
+
+VolumeMeter {
+    qproperty-foregroundNominalColor: #62ce4a;
+    qproperty-foregroundWarningColor: #fe9558;
+    qproperty-foregroundErrorColor: #f13d64;
+}
+
+/* Context Menu */
+QMenu::right-arrow {
+    image: url(theme:Light/expand.svg);
+}
+
+/* Dock Widget */
+QDockWidget {
+    titlebar-close-icon: url(theme:Light/close.svg);
+    titlebar-normal-icon: url(theme:Light/popout.svg);
+}
+
+/* Source Context Bar */
+QPushButton#sourcePropertiesButton {
+    qproperty-icon: url(theme:Light/settings/general.svg);
+}
+
+QPushButton#sourceFiltersButton {
+    qproperty-icon: url(theme:Light/filter.svg);
+}
+
+/* Scenes and Sources toolbar */
+* [themeID="addIconSmall"] {
+    qproperty-icon: url(theme:Light/plus.svg);
+}
+
+* [themeID="removeIconSmall"] {
+    qproperty-icon: url(theme:Light/trash.svg);
+}
+
+* [themeID="clearIconSmall"] {
+    qproperty-icon: url(theme:Light/entry-clear.svg);
+}
+
+* [themeID="propertiesIconSmall"] {
+    qproperty-icon: url(theme:Light/settings/general.svg);
+}
+
+* [themeID="configIconSmall"] {
+    qproperty-icon: url(theme:Light/settings/general.svg);
+}
+
+* [themeID="menuIconSmall"] {
+    qproperty-icon: url(theme:Light/dots-vert.svg);
+}
+
+* [themeID="refreshIconSmall"] {
+    qproperty-icon: url(theme:Light/refresh.svg);
+}
+
+* [themeID="cogsIcon"] {
+    qproperty-icon: url(theme:Light/cogs.svg);
+}
+
+#sourceInteractButton {
+    qproperty-icon: url(theme:Light/interact.svg);
+}
+
+* [themeID="upArrowIconSmall"] {
+    qproperty-icon: url(theme:Light/up.svg);
+}
+
+* [themeID="downArrowIconSmall"] {
+    qproperty-icon: url(theme:Light/down.svg);
+}
+
+* [themeID="pauseIconSmall"] {
+    qproperty-icon: url(theme:Light/media-pause.svg);
+}
+
+* [themeID="filtersIcon"] {
+    qproperty-icon: url(theme:Light/filter.svg);
+}
+
+QToolBarExtension {
+    qproperty-icon: url(theme:Light/dots-vert.svg);
+}
+
+/* ComboBox */
+QComboBox::down-arrow,
+QDateTimeEdit::down-arrow {
+    image: url(theme:Light/collapse.svg);
+}
+
+QComboBox::down-arrow:editable,
+QDateTimeEdit::down-arrow:editable {
+    image: url(theme:Light/down.svg);
+}
+
+/* Spinbox and doubleSpinbox */
+QSpinBox::up-arrow,
+QDoubleSpinBox::up-arrow {
+    image: url(theme:Light/up.svg);
+}
+
+QSpinBox::down-arrow,
+QDoubleSpinBox::down-arrow {
+    image: url(theme:Light/down.svg);
+}
+
+/* Buttons */
+QPushButton::menu-indicator {
+    image: url(theme:Light/down.svg);
+}
+
+/* Settings Icons */
+OBSBasicSettings {
+    qproperty-generalIcon: url(theme:Light/settings/general.svg);
+    qproperty-appearanceIcon: url(theme:Light/settings/appearance.svg);
+    qproperty-streamIcon: url(theme:Light/settings/stream.svg);
+    qproperty-outputIcon: url(theme:Light/settings/output.svg);
+    qproperty-audioIcon: url(theme:Light/settings/audio.svg);
+    qproperty-videoIcon: url(theme:Light/settings/video.svg);
+    qproperty-hotkeysIcon: url(theme:Light/settings/hotkeys.svg);
+    qproperty-accessibilityIcon: url(theme:Light/settings/accessibility.svg);
+    qproperty-advancedIcon: url(theme:Light/settings/advanced.svg);
+}
+
+/* Checkboxes */
+QCheckBox::indicator:unchecked,
+QGroupBox::indicator:unchecked {
+    image: url(theme:Light/checkbox_unchecked.svg);
+}
+
+QCheckBox::indicator:unchecked:hover,
+QGroupBox::indicator:unchecked:hover {
+    border: none;
+    image: url(theme:Light/checkbox_unchecked_focus.svg);
+}
+
+QCheckBox::indicator:checked,
+QGroupBox::indicator:checked {
+    image: url(theme:Light/checkbox_checked.svg);
+}
+
+QCheckBox::indicator:checked:hover,
+QGroupBox::indicator:checked:hover {
+    image: url(theme:Light/checkbox_checked_focus.svg);
+}
+
+QCheckBox::indicator:checked:disabled,
+QGroupBox::indicator:checked:disabled {
+    image: url(theme:Light/checkbox_checked_disabled.svg);
+}
+
+/* Locked CheckBox */
+QCheckBox[lockCheckBox=true]::indicator:checked,
+QCheckBox[lockCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Light/locked.svg);
+}
+
+/* Visibility CheckBox */
+QCheckBox[visibilityCheckBox=true]::indicator:checked,
+QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
+    image: url(theme:Light/visible.svg);
+}
+
+* [themeID="revertIcon"] {
+    qproperty-icon: url(theme:Light/revert.svg);
+}
+
+/* Mute CheckBox */
+MuteCheckBox::indicator:checked {
+    image: url(theme:Light/mute.svg);
+}
+
+MuteCheckBox::indicator:indeterminate {
+    image: url(theme:Light/unassigned.svg);
+}
+
+MuteCheckBox::indicator:unchecked {
+    image: url(theme:Light/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:hover {
+    image: url(theme:Light/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:unchecked:focus {
+    image: url(theme:Light/settings/audio.svg);
+}
+
+MuteCheckBox::indicator:checked:hover {
+    image: url(theme:Light/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:focus {
+    image: url(theme:Light/mute.svg);
+}
+
+MuteCheckBox::indicator:checked:disabled {
+    image: url(theme:Light/mute.svg);
+}
+
+MuteCheckBox::indicator:unchecked:disabled {
+    image: url(theme:Light/settings/audio.svg);
+}
+
+/* Sources List Group Collapse Checkbox */
+QCheckBox[sourceTreeSubItem=true]::indicator:checked,
+QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
+    image: url(theme:Light/expand.svg);
+}
+
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
+QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
+    image: url(theme:Light/collapse.svg);
+}
+
+/* Source Icons */
+OBSBasic {
+    qproperty-imageIcon: url(theme:Light/sources/image.svg);
+    qproperty-colorIcon: url(theme:Light/sources/brush.svg);
+    qproperty-slideshowIcon: url(theme:Light/sources/slideshow.svg);
+    qproperty-audioInputIcon: url(theme:Light/sources/microphone.svg);
+    qproperty-audioOutputIcon: url(theme:Light/settings/audio.svg);
+    qproperty-desktopCapIcon: url(theme:Light/settings/video.svg);
+    qproperty-windowCapIcon: url(theme:Light/sources/window.svg);
+    qproperty-gameCapIcon: url(theme:Light/sources/gamepad.svg);
+    qproperty-cameraIcon: url(theme:Light/sources/camera.svg);
+    qproperty-textIcon: url(theme:Light/sources/text.svg);
+    qproperty-mediaIcon: url(theme:Light/sources/media.svg);
+    qproperty-browserIcon: url(theme:Light/sources/globe.svg);
+    qproperty-groupIcon: url(theme:Light/sources/group.svg);
+    qproperty-sceneIcon: url(theme:Light/sources/scene.svg);
+    qproperty-defaultIcon: url(theme:Light/sources/default.svg);
+    qproperty-audioProcessOutputIcon: url(theme:Light/sources/windowaudio.svg);
+}
+
+/* Save icon */
+* [themeID="replayIconSmall"] {
+    qproperty-icon: url(theme:Light/save.svg);
+}
+
+/* Media icons */
+* [themeID="playIcon"] {
+    qproperty-icon: url(theme:Light/media/media_play.svg);
+}
+
+* [themeID="pauseIcon"] {
+    qproperty-icon: url(theme:Light/media/media_pause.svg);
+}
+
+* [themeID="restartIcon"] {
+    qproperty-icon: url(theme:Light/media/media_restart.svg);
+}
+
+* [themeID="stopIcon"] {
+    qproperty-icon: url(theme:Light/media/media_stop.svg);
+}
+
+* [themeID="nextIcon"] {
+    qproperty-icon: url(theme:Light/media/media_next.svg);
+}
+
+* [themeID="previousIcon"] {
+    qproperty-icon: url(theme:Light/media/media_previous.svg);
+}
+
+/* YouTube Integration */
+OBSYoutubeActions {
+    qproperty-thumbPlaceholder: url(theme:Light/sources/image.svg);
+}
+
+/* Calendar Widget */
+QDateTimeEdit::down-arrow {
+    image: url(theme:Light/down.svg);
+}
+
+/* Calendar Top Bar Buttons */
+#qt_calendar_monthbutton::menu-indicator {
+    image: url(theme:Light/down.svg);
+}
+
+QCalendarWidget #qt_calendar_prevmonth {
+    qproperty-icon: url(theme:Light/left.svg);
+}
+
+QCalendarWidget #qt_calendar_nextmonth {
+    qproperty-icon: url(theme:Light/right.svg);
+}

.config/posting/config.yaml

@@ -0,0 +1 @@
+theme: Catppuccin

.config/posting/themes/catppuccin_latte.yml

@@ -0,0 +1,26 @@
+name: Catppuccin
+primary: '#8839ef'
+secondary: '#40a02b'
+accent: '#7287fd'
+background: '#eff1f5'
+surface: '#ccd0da'
+error: '#d20f39'
+success: '#40a02b'
+warning: '#df8e1d'
+
+text_area:
+  gutter: 'bold #b4befe'
+  matched_bracket: 'white on #8839ef'
+url:
+  base: 'italic #1e66f5'
+  protocol: 'bold #40a02b'
+syntax:
+  json_key: 'italic #1e66f5'
+  json_number: '#fe640b'
+  json_string: '#40a02b'
+  json_boolean: '#8839ef'
+  json_null: 'underline #8839ef'
+
+author: Thomas Philippot
+description: A soothing pastel theme for the high-spirited!
+homepage: https://github.com/catppuccin/catppuccin

.config/posting/themes/catppuccin_macchiato.yml

@@ -0,0 +1,26 @@
+name: Catppuccin
+primary: '#c6a0f6'
+secondary: '#a6da95'
+accent: '#8aadf4'
+background: '#24273a'
+surface: '#363a4f'
+error: '#ed8796'
+success: '#a6da95'
+warning: '#eed49f'
+
+text_area:
+  gutter: 'bold #b4befe'
+  matched_bracket: 'black on #c6a0f6'
+url:
+  base: 'italic #91d7e3'
+  protocol: 'bold #a6da95'
+syntax:
+  json_key: 'italic #8aadf4'
+  json_number: '#f5a97f'
+  json_string: '#a6da95'
+  json_boolean: '#c6a0f6'
+  json_null: 'underline #c6a0f6'
+
+author: Thomas Philippot
+description: A soothing pastel theme for the high-spirited!
+homepage: https://github.com/catppuccin/catppuccin

.config/rofi/colors/adapta.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #222D32FF;
+    background-alt: #29353BFF;
+    foreground:     #B8C2C6FF;
+    selected:       #00BCD4FF;
+    active:         #21FF90FF;
+    urgent:         #FF4B60FF;
+}

.config/rofi/colors/arc.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #2F343FFF;
+    background-alt: #383C4AFF;
+    foreground:     #BAC5D0FF;
+    selected:       #5294E2FF;
+    active:         #98C379FF;
+    urgent:         #E06B74FF;
+}

.config/rofi/colors/black.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #000000FF;
+    background-alt: #101010FF;
+    foreground:     #FFFFFFFF;
+    selected:       #62AEEFFF;
+    active:         #98C379FF;
+    urgent:         #E06B74FF;
+}

.config/rofi/colors/catppuccin.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #24273a;
+    background-alt: #1e2030;
+    foreground:     #6c7086;
+    selected:       #8aadf4;
+    active:         #a6da95;
+    urgent:         #ed8796;
+}

.config/rofi/colors/cyberpunk.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #000B1EFF;
+    background-alt: #0A1528FF;
+    foreground:     #0ABDC6FF;
+    selected:       #0ABDC6FF;
+    active:         #00FF00FF;
+    urgent:         #FF0000FF;
+}

.config/rofi/colors/dracula.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #1E1F29FF;
+    background-alt: #282A36FF;
+    foreground:     #FFFFFFFF;
+    selected:       #BD93F9FF;
+    active:         #50FA7BFF;
+    urgent:         #FF5555FF;
+}

.config/rofi/colors/everforest.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #323D43FF;
+    background-alt: #3C474DFF;
+    foreground:     #DAD1BEFF;
+    selected:       #7FBBB3FF;
+    active:         #A7C080FF;
+    urgent:         #E67E80FF;
+}

.config/rofi/colors/gruvbox.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #282828FF;
+    background-alt: #353535FF;
+    foreground:     #EBDBB2FF;
+    selected:       #83A598FF;
+    active:         #B8BB26FF;
+    urgent:         #FB4934FF;
+}

.config/rofi/colors/latte.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #eff1f5;
+    background-alt: #e6e9ef;
+    foreground:     #9ca0b0;
+    selected:       #1e66f5;
+    active:         #40a02b;
+    urgent:         #d20f39;
+}

.config/rofi/colors/lovelace.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #1D1F28FF;
+    background-alt: #282A36FF;
+    foreground:     #FDFDFDFF;
+    selected:       #79E6F3FF;
+    active:         #5ADECDFF;
+    urgent:         #F37F97FF;
+}

.config/rofi/colors/macchiato.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #24273a;
+    background-alt: #1e2030;
+    foreground:     #6c7086;
+    selected:       #8aadf4;
+    active:         #a6da95;
+    urgent:         #ed8796;
+}

.config/rofi/colors/navy.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #021B21FF;
+    background-alt: #0C252BFF;
+    foreground:     #F2F1B9FF;
+    selected:       #44B5B1FF;
+    active:         #7CBF9EFF;
+    urgent:         #C2454EFF;
+}

.config/rofi/colors/nord.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #2E3440FF;
+    background-alt: #383E4AFF;
+    foreground:     #E5E9F0FF;
+    selected:       #81A1C1FF;
+    active:         #A3BE8CFF;
+    urgent:         #BF616AFF;
+}

.config/rofi/colors/onedark.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #1E2127FF;
+    background-alt: #282B31FF;
+    foreground:     #FFFFFFFF;
+    selected:       #61AFEFFF;
+    active:         #98C379FF;
+    urgent:         #E06C75FF;
+}

.config/rofi/colors/paper.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #F1F1F1FF;
+    background-alt: #E0E0E0FF;
+    foreground:     #252525FF;
+    selected:       #008EC4FF;
+    active:         #10A778FF;
+    urgent:         #C30771FF;
+}

.config/rofi/colors/solarized.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #002B36FF;
+    background-alt: #073642FF;
+    foreground:     #EEE8D5FF;
+    selected:       #268BD2FF;
+    active:         #859900FF;
+    urgent:         #DC322FFF;
+}

.config/rofi/colors/theme.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #24273a;
+    background-alt: #1e2030;
+    foreground:     #6c7086;
+    selected:       #8aadf4;
+    active:         #a6da95;
+    urgent:         #ed8796;
+}

.config/rofi/colors/tokyonight.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Levi Lacoss (fishyfishfish55)
+ * Github : @fishyfishfish55
+ *
+ * Colors
+ **/
+
+* {
+    background:     #15161EFF;
+    background-alt: #1A1B26FF;
+    foreground:     #C0CAF5FF;
+    selected:       #33467CFF;
+    active:         #414868FF;
+    urgent:         #F7768EFF;
+}

.config/rofi/colors/yousai.rasi

@@ -0,0 +1,16 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Colors
+ **/
+
+* {
+    background:     #F5E7DEFF;
+    background-alt: #EBDCD2FF;
+    foreground:     #34302DFF;
+    selected:       #D97742FF;
+    active:         #BF8F60FF;
+    urgent:         #B23636FF;
+}

.config/rofi/config.rasi

@@ -0,0 +1,181 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Configuration For Rofi Version: 1.7.3
+ **/
+
+configuration {
+	/*---------- General setting ----------*/
+	modi: "drun,run,filebrowser,window";
+	case-sensitive: false;
+	cycle: true;
+	filter: "";
+	scroll-method: 0;
+	normalize-match: true;
+	show-icons: true;
+	icon-theme: "Papirus";
+/*	cache-dir: ;*/
+	steal-focus: false;
+/*	dpi: -1;*/
+
+	/*---------- Matching setting ----------*/
+	matching: "normal";
+	tokenize: true;
+
+	/*---------- SSH settings ----------*/
+	ssh-client: "ssh";
+	ssh-command: "{terminal} -e {ssh-client} {host} [-p {port}]";
+	parse-hosts: true;
+	parse-known-hosts: true;
+
+	/*---------- Drun settings ----------*/
+	drun-categories: "";
+	drun-match-fields: "name,generic,exec,categories,keywords";
+	drun-display-format: "{name} [<span weight='light' size='small'><i>({generic})</i></span>]";
+	drun-show-actions: false;
+	drun-url-launcher: "xdg-open";
+	drun-use-desktop-cache: false;
+	drun-reload-desktop-cache: false;
+	drun {
+		/** Parse user desktop files. */
+		parse-user:   true;
+		/** Parse system desktop files. */
+		parse-system: true;
+    }
+
+	/*---------- Run settings ----------*/
+	run-command: "{cmd}";
+	run-list-command: "";
+	run-shell-command: "{terminal} -e {cmd}";
+
+	/*---------- Fallback Icon ----------*/
+	run,drun {
+		fallback-icon: "application-x-addon";
+	}
+
+	/*---------- Window switcher settings ----------*/
+	window-match-fields: "title,class,role,name,desktop";
+	window-command: "wmctrl -i -R {window}";
+	window-format: "{w} - {c} - {t:0}";
+	window-thumbnail: false;
+
+	/*---------- Combi settings ----------*/
+/*	combi-modi: "window,run";*/
+/*	combi-hide-mode-prefix: false;*/
+/*	combi-display-format: "{mode} {text}";*/
+
+	/*---------- History and Sorting ----------*/
+	disable-history: false;
+	sorting-method: "normal";
+	max-history-size: 25;
+
+	/*---------- Display setting ----------*/
+	display-window: "Windows";
+	display-windowcd: "Window CD";
+	display-run: "Run";
+	display-ssh: "SSH";
+	display-drun: "Apps";
+	display-combi: "Combi";
+	display-keys: "Keys";
+	display-filebrowser: "Files";
+
+	/*---------- Misc setting ----------*/
+	terminal: "rofi-sensible-terminal";
+	font: "Mono 12";
+	sort: false;
+	threads: 0;
+	click-to-exit: true;
+/*	ignored-prefixes: "";*/
+/*	pid: "/run/user/1000/rofi.pid";*/
+
+	/*---------- File browser settings ----------*/
+    filebrowser {
+/*	  directory: "/home";*/
+      directories-first: true;
+      sorting-method:    "name";
+    }
+
+	/*---------- Other settings ----------*/
+    timeout {
+      action: "kb-cancel";
+      delay:  0;
+    }
+
+	/*---------- Keybindings ----------*/
+/*
+	kb-primary-paste: "Control+V,Shift+Insert";
+	kb-secondary-paste: "Control+v,Insert";
+	kb-clear-line: "Control+w";
+	kb-move-front: "Control+a";
+	kb-move-end: "Control+e";
+	kb-move-word-back: "Alt+b,Control+Left";
+	kb-move-word-forward: "Alt+f,Control+Right";
+	kb-move-char-back: "Left,Control+b";
+	kb-move-char-forward: "Right,Control+f";
+	kb-remove-word-back: "Control+Alt+h,Control+BackSpace";
+	kb-remove-word-forward: "Control+Alt+d";
+	kb-remove-char-forward: "Delete,Control+d";
+	kb-remove-char-back: "BackSpace,Shift+BackSpace,Control+h";
+	kb-remove-to-eol: "Control+k";
+	kb-remove-to-sol: "Control+u";
+	kb-accept-entry: "Control+j,Control+m,Return,KP_Enter";
+	kb-accept-custom: "Control+Return";
+	kb-accept-custom-alt: "Control+Shift+Return";
+	kb-accept-alt: "Shift+Return";
+	kb-delete-entry: "Shift+Delete";
+	kb-mode-next: "Shift+Right,Control+Tab";
+	kb-mode-previous: "Shift+Left,Control+ISO_Left_Tab";
+	kb-mode-complete: "Control+l";
+	kb-row-left: "Control+Page_Up";
+	kb-row-right: "Control+Page_Down";
+	kb-row-down: "Down,Control+n";
+	kb-page-prev: "Page_Up";
+	kb-page-next: "Page_Down";
+	kb-row-first: "Home,KP_Home";
+	kb-row-last: "End,KP_End";
+	kb-row-select: "Control+space";
+	kb-screenshot: "Alt+S";
+	kb-ellipsize: "Alt+period";
+	kb-toggle-case-sensitivity: "grave,dead_grave";
+	kb-toggle-sort: "Alt+grave";
+	kb-cancel: "Escape,Control+g,Control+bracketleft";
+	kb-custom-1: "Alt+1";
+	kb-custom-2: "Alt+2";
+	kb-custom-3: "Alt+3";
+	kb-custom-4: "Alt+4";
+	kb-custom-5: "Alt+5";
+	kb-custom-6: "Alt+6";
+	kb-custom-7: "Alt+7";
+	kb-custom-8: "Alt+8";
+	kb-custom-9: "Alt+9";
+	kb-custom-10: "Alt+0";
+	kb-custom-11: "Alt+exclam";
+	kb-custom-12: "Alt+at";
+	kb-custom-13: "Alt+numbersign";
+	kb-custom-14: "Alt+dollar";
+	kb-custom-15: "Alt+percent";
+	kb-custom-16: "Alt+dead_circumflex";
+	kb-custom-17: "Alt+ampersand";
+	kb-custom-18: "Alt+asterisk";
+	kb-custom-19: "Alt+parenleft";
+	kb-select-1: "Super+1";
+	kb-select-2: "Super+2";
+	kb-select-3: "Super+3";
+	kb-select-4: "Super+4";
+	kb-select-5: "Super+5";
+	kb-select-6: "Super+6";
+	kb-select-7: "Super+7";
+	kb-select-8: "Super+8";
+	kb-select-9: "Super+9";
+	kb-select-10: "Super+0";
+	ml-row-left: "ScrollLeft";
+	ml-row-right: "ScrollRight";
+	ml-row-up: "ScrollUp";
+	ml-row-down: "ScrollDown";
+	me-select-entry: "MousePrimary";
+	me-accept-entry: "MouseDPrimary";
+	me-accept-custom: "Control+MouseDPrimary";
+*/
+}

.config/rofi/fonts.rasi

@@ -0,0 +1,12 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Fonts
+ *
+ **/
+
+* {
+    font: "Iosevka Nerd Font 10";
+}

.config/rofi/launcher.rasi

@@ -0,0 +1,171 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Rofi Theme File
+ * Rofi Version: 1.7.3
+ **/
+
+/*****----- Configuration -----*****/
+configuration {
+	modi:                       "drun";
+    show-icons:                 true;
+    display-drun:               "";
+	drun-display-format:        "{name}";
+}
+
+/*****----- Global Properties -----*****/
+@import                          "~/.config/rofi/colors/theme.rasi"
+@import                          "~/.config/rofi/fonts.rasi"
+
+/*****----- Main Window -----*****/
+window {
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       700px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px;
+    border-radius:               12px;
+    border-color:                @selected;
+    background-color:            @background;
+    cursor:                      "default";
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     10px;
+    margin:                      0px;
+    padding:                     20px;
+    border:                      0px solid;
+    border-radius:               0px 0px 0px 0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "inputbar", "listview" ];
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    margin:                      0px;
+    padding:                     15px;
+    border:                      0px solid;
+    border-radius:               12px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "prompt", "entry" ];
+}
+
+prompt {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "::";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+    placeholder:                 "Search...";
+    placeholder-color:           inherit;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     2;
+    lines:                       8;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+    
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+scrollbar {
+    handle-width:                5px ;
+    handle-color:                @selected;
+    border-radius:               0px;
+    background-color:            @background-alt;
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     10px;
+    margin:                      0px;
+    padding:                     5px;
+    border:                      0px solid;
+    border-radius:               12px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element normal.normal {
+    background-color:            @background;
+    text-color:                  @foreground;
+}
+element selected.normal {
+    background-color:            @selected;
+    text-color:                  @background;
+}
+element-icon {
+    background-color:            transparent;
+    text-color:                  inherit;
+    size:                        32px;
+    cursor:                      inherit;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    highlight:                   inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+
+/*****----- Message -----*****/
+error-message {
+    padding:                     15px;
+    border:                      2px solid;
+    border-radius:               12px;
+    border-color:                @selected;
+    background-color:            @background;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            @background;
+    text-color:                  @foreground;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    highlight:                   none;
+}

.config/rofi/theme.rasi

@@ -0,0 +1,171 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Rofi Theme File
+ * Rofi Version: 1.7.3
+ **/
+
+/*****----- Configuration -----*****/
+configuration {
+	modi:                       "drun";
+    show-icons:                 false;
+    display-drun:               "search";
+	drun-display-format:        "{name}";
+}
+
+/*****----- Global Properties -----*****/
+@import                          "~/.config/rofi/colors/theme.rasi"
+@import                          "~/.config/rofi/fonts.rasi"
+
+/*****----- Main Window -----*****/
+window {
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       400px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               12px;
+    border-color:                @selected;
+    background-color:            @background;
+    cursor:                      "default";
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px 0px 0px 0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "inputbar", "listview" ];
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     false;
+    spacing:                     10px;
+    margin:                      0px;
+    padding:                     15px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            @selected;
+    text-color:                  @background;
+    children:                    [ "prompt", "entry" ];
+}
+
+prompt {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "::";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+    placeholder:                 "Search...";
+    placeholder-color:           inherit;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       6;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+    
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+scrollbar {
+    handle-width:                5px ;
+    handle-color:                @selected;
+    border-radius:               0px;
+    background-color:            @background-alt;
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     10px;
+    margin:                      0px;
+    padding:                     8px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element normal.normal {
+    background-color:            @background;
+    text-color:                  @foreground;
+}
+element selected.normal {
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+element-icon {
+    background-color:            transparent;
+    text-color:                  inherit;
+    size:                        32px;
+    cursor:                      inherit;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    highlight:                   inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+
+/*****----- Message -----*****/
+error-message {
+    padding:                     15px;
+    border:                      2px solid;
+    border-radius:               12px;
+    border-color:                @selected;
+    background-color:            @background;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            @background;
+    text-color:                  @foreground;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    highlight:                   none;
+}

.config/rofi/window.rasi

@@ -0,0 +1,151 @@
+/**
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Github : @adi1090x
+ * 
+ * Rofi Theme File
+ * Rofi Version: 1.7.3
+ **/
+
+/*****----- Configuration -----*****/
+configuration {
+	modi:                       "drun";
+    show-icons:                 true;
+    display-drun:               " Applications";
+	drun-display-format:        "{name}";
+}
+
+/*****----- Global Properties -----*****/
+@import                          "~/.config/rofi/colors/theme.rasi"
+@import                          "~/.config/rofi/fonts.rasi"
+
+/*****----- Main Window -----*****/
+window {
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       450px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            @background;
+    cursor:                      "default";
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px 0px 0px 0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "listview", "entry" ];
+}
+
+/*****----- Inputbar -----*****/
+entry {
+    enabled:                     true;
+    expand:                      false;
+    padding:                     20px 0px;
+    background-color:            @selected;
+    text-color:                  @background;
+    cursor:                      text;
+    placeholder:                 "Search...";
+    placeholder-color:           inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.5;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     3;
+    lines:                       3;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+    
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     20px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+scrollbar {
+    handle-width:                5px ;
+    handle-color:                @selected;
+    border-radius:               0px;
+    background-color:            @background-alt;
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     20px 10px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    orientation:                 vertical;
+    cursor:                      pointer;
+}
+element normal.normal {
+    background-color:            @background;
+    text-color:                  @foreground;
+}
+element selected.normal {
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+element-icon {
+    background-color:            transparent;
+    text-color:                  inherit;
+    size:                        64px;
+    cursor:                      inherit;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    highlight:                   inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.5;
+}
+
+/*****----- Message -----*****/
+error-message {
+    padding:                     15px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            @background;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            @background;
+    text-color:                  @foreground;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    highlight:                   none;
+}

.config/tidal-hi-fi/catppuccin_macchiato.css

@@ -0,0 +1,140 @@
+--wave-color-material-dark: #363a4f;
+--wave-color-material-light: #494d64;
+--wave-color-opacity-base-bright-thick: fade(#1e2030, 60%);
+--wave-color-opacity-base-bright-thin: fade(#1e2030, 20%);
+--wave-color-opacity-base-bright-transparent: #1e2030;
+--wave-color-opacity-base-bright-ultra-thick: fade(#1e2030, 80%);
+--wave-color-opacity-base-brightest-regular: fade(#24273a, 40%);
+--wave-color-opacity-base-brightest-thin: fade(#24273a, 20%);
+--wave-color-opacity-base-brightest-ultra-thin: fade(#24273a, 10%);
+--wave-color-opacity-base-brighter-ultra-thick: fade(#363a4f, 80%);
+--wave-color-opacity-base-fill-regular:  fade(#181926, 40%);
+--wave-color-opacity-base-fill-thick: fade(#181926, 60%);
+--wave-color-opacity-base-fill-thin: #181926;
+--wave-color-opacity-base-fill-transparent: #181926;
+--wave-color-opacity-base-fill-ultra-thick: fade(#181926, 10%);
+--wave-color-opacity-base-fill-ultra-thin: fade(#181926, 10%);
+--wave-color-opacity-contrast-fill-regular: fade(#cad3f5, 40%);
+--wave-color-opacity-contrast-fill-thin: fade(#cad3f5, 20%);
+--wave-color-opacity-contrast-fill-ultra-thin: fade(#6e738d, 40%);
+--wave-color-opacity-contrast-fill-transparent: #cad3f5;
+--wave-color-opacity-contrast-fill-thick: #a5adcb;
+--wave-color-opacity-contrast-fill-ultra-thick: #a5adcb;
+--wave-color-opacity-rainbow-blue-thin: fade(#8aadf4, 8%);
+--wave-color-solid-accent-fill: #7dc4e4;
+--wave-color-solid-accent-bright: lighten(#7dc4e4, 7%);
+--wave-color-solid-accent-brighter: lighten(#7dc4e4, 8%);
+--wave-color-solid-accent-dark: darken(#7dc4e4, 5%);
+--wave-color-solid-accent-darker: darken(#7dc4e4, 8%);
+--wave-color-solid-accent-darkest: darken(#7dc4e4, 9%);
+--wave-color-solid-base-fill: #24273a;
+--wave-color-solid-contrast-fill: #cad3f5;
+--wave-color-solid-base-bright: #363a4f;
+--wave-color-solid-base-brighter: #363a4f;
+--wave-color-solid-base-brightest: #494d64;
+--wave-color-solid-base-brighter-ultra-thick: #494d64;
+--wave-color-solid-contrast-dark: #cad3f5;
+--wave-color-solid-contrast-darker: #a5adcb;
+--wave-color-solid-contrast-darkest: #b8c0e0;
+--wave-color-solid-rainbow-blue-fill: #8aadf4;
+--wave-color-solid-rainbow-green-brighter: lighten(#a6da95, 8%);
+--wave-color-solid-rainbow-green-dark: darken(#a6da95, 5%);
+--wave-color-solid-rainbow-green-darker: darken(#a6da95, 8%);
+--wave-color-solid-rainbow-green-darkest: darken(#a6da95, 9%);
+--wave-color-solid-rainbow-green-fill: #a6da95;
+--wave-color-solid-rainbow-orange-fill: #f5a97f;
+--wave-color-solid-rainbow-purple-fill: #c6a0f6;
+--wave-color-solid-rainbow-red-bright: lighten(#ed8796, 2%);
+--wave-color-solid-rainbow-red-brighter: lighten(#ed8796, 3%);
+--wave-color-solid-rainbow-red-dark: darken(#ed8796, 6%);
+--wave-color-solid-rainbow-red-darker: darken(#ed8796, 8%);
+--wave-color-solid-rainbow-red-darkest: darken(#ed8796, 9%);
+--wave-color-solid-rainbow-red-fill: #ed8796;
+--wave-color-solid-rainbow-yellow-bright: lighten(#eed49f, 3%);
+--wave-color-solid-rainbow-yellow-brighter: lighten(#eed49f, 9%);
+--wave-color-solid-rainbow-yellow-dark: darken(#eed49f, 6%);
+--wave-color-solid-rainbow-yellow-darker: darken(#eed49f, 8%);
+--wave-color-solid-rainbow-yellow-darkest: darken(#eed49f, 9%);
+--wave-color-solid-rainbow-yellow-fill: #eed49f;
+--wave-color-solid-special-bright: lighten(#f5a97f, 3%);
+--wave-color-solid-special-brighter: lighten(#f5a97f, 9%);
+--wave-color-solid-special-dark: darken(#f5a97f, 6%);
+--wave-color-solid-special-darker: darken(#f5a97f, 8%);
+--wave-color-solid-special-darkest: darken(#f5a97f, 9%);
+--wave-color-solid-special-fill: #f5a97f;
+--wave-color-solid-warning-bright: lighten(#ed8796, 3%);
+--wave-color-solid-warning-brighter: lighten(#ed8796, 9%);
+--wave-color-solid-warning-dark: darken(#ed8796, 6%);
+--wave-color-solid-warning-darker: darken(#ed8796, 8%);
+--wave-color-solid-warning-darkest: darken(#ed8796, 9%);
+--wave-color-solid-warning-fill: #ed8796;
+
+[data-wave-color="textDefault"],
+[class^="css--"],
+[class^="icon"],
+[class*="smallHeader"] .artist-link a,
+[class*="smallHeader"] .artist-link span {
+    color: #cad3f5;
+}
+
+[class*="primary"] [data-wave-color="textDefault"],
+[class*="activeTab"] [data-wave-color="textDefault"],
+[class*="primary"] [class^="icon"],
+[class*="activeTab"] [class^="icon"] {
+    color: #24273a;
+}
+
+[class*="accentedIcon"],
+[data-wave-color="textUrl"] {
+    color: #7dc4e4;
+}
+
+[data-test="stream-metadata"] [class^="textContainer"] span {
+    color: #1e2030 !important;
+}
+
+[data-wave-color="textSecondary"] {
+    color: #a5adcb;
+}
+
+[class*="_wave-btn-rank-secondary"] {
+    background-color: #494d64;
+}
+
+[class*="iconsWrapper"] [class*="icons"] {
+    background-color: fade(#7dc4e4, 30%) !important;
+}
+
+[class*="_wave-btn-rank-primary"] {
+    background-color: #cad3f5;
+    color: #24273a !important;
+}
+
+[class*="_wave-btn-rank-primary"]:hover {
+    background-color: #24273a;
+    color: #cad3f5 !important;
+}
+
+[class*="_wave-badge-color-default"] {
+    color: #cad3f5;
+    background-color: fade(#cad3f5, 20%);
+}
+
+[class*="_wave-badge-color-high"] {
+    color: #7dc4e4;
+    background-color: fade(#7dc4e4, 20%);
+}
+
+[class*="_wave-badge-color-max"] {
+    color: #eed49f;
+    background-color: fade(#eed49f, 20%);
+}
+
+.ReactModal__Content [data-type="page"] {
+    background-color: #363a4f;
+}
+
+.ReactModal__Overlay {
+    background-color: fade(#6e738d, 50%) !important;
+}
+

.config/tmux/tmux.conf

@@ -0,0 +1,24 @@
+# Set true color
+set-option -sa terminal-overrides ",xterm*:Tc"
+set -g mouse on
+
+# Set prefix
+unbind C-b
+set -g prefix C-Space
+bind C-Space send-prefix
+
+# Start windows and panes at 1, not 0
+set -g base-index 1
+set -g pane-base-index 1
+set-window-option -g pane-base-index 1
+set-option -g renumber-windows on
+
+set -g @catppuccin_flavour 'macchiato'
+set -g @catppuccin_status_modules_right "application session load"
+
+set -g @plugin 'tmux-plugins/tpm'
+set -g @plugin 'tmux-plugins/tmux-sensible'
+set -g @plugin 'catppuccin/tmux'
+set -g @plugin 'jamesoff/tmux-loadavg'
+
+run '~/.tmux/plugins/tpm/tpm'

.config/zathura/zathurarc

@@ -0,0 +1 @@
+include noctaliarc

.config/zsh/aliases

@@ -0,0 +1,29 @@
+# File system
+if command -v eza &> /dev/null; then
+  alias ls='eza -lh --group-directories-first --icons=auto'
+  alias lsa='ls -a'
+  alias lt='eza --tree --level=2 --long --icons --git'
+  alias lta='lt -a'
+fi
+
+if [[ "$TERM" == "xterm-kitty" ]]; then
+  alias ff="fzf --preview 'case \$(file --mime-type -b {}) in image/*) kitty icat --clear --transfer-mode=memory --stdin=no --place=\${FZF_PREVIEW_COLUMNS}x\${FZF_PREVIEW_LINES}@0x0 {} ;; *) bat --style=numbers --color=always {} ;; esac'"
+fi
+
+
+# Tools
+#alias c='opencode'
+#alias cx='printf "\033[2J\033[3J\033[H" && claude --permission-mode bypassPermissions'
+#alias d='docker'
+#alias r='rails'
+#alias t='tmux attach || tmux new -s Work'
+#alias ic='tdl c'
+#alias ix='tdl cx'
+#alias icx='tdl c cx'
+#n() { if [ "$#" -eq 0 ]; then command nvim . ; else command nvim "$@"; fi; }
+
+# Git
+alias g='git'
+alias gcm='git commit -m'
+alias gcam='git commit -a -m'
+alias gcad='git commit -a --amend'

.gitignore

@@ -0,0 +1,2 @@
+.idea/
+

.oh-my-zsh/oh-my-zsh.sh

@@ -0,0 +1,234 @@
+# ANSI formatting function (\033[<code>m)
+# 0: reset, 1: bold, 4: underline, 22: no bold, 24: no underline, 31: red, 33: yellow
+omz_f() {
+  [ $# -gt 0 ] || return
+  IFS=";" printf "\033[%sm" $*
+}
+# If stdout is not a terminal ignore all formatting
+[ -t 1 ] || omz_f() { :; }
+
+# Protect against non-zsh execution of Oh My Zsh (use POSIX syntax here)
+[ -n "$ZSH_VERSION" ] || {
+  omz_ptree() {
+    # Get process tree of the current process
+    pid=$$; pids="$pid"
+    while [ ${pid-0} -ne 1 ] && ppid=$(ps -e -o pid,ppid | awk "\$1 == $pid { print \$2 }"); do
+      pids="$pids $pid"; pid=$ppid
+    done
+
+    # Show process tree
+    case "$(uname)" in
+    Linux) ps -o ppid,pid,command -f -p $pids 2>/dev/null ;;
+    Darwin|*) ps -o ppid,pid,command -p $pids 2>/dev/null ;;
+    esac
+
+    # If ps command failed, try Busybox ps
+    [ $? -eq 0 ] || ps -o ppid,pid,comm | awk "NR == 1 || index(\"$pids\", \$2) != 0"
+  }
+
+  {
+    shell=$(ps -o pid,comm | awk "\$1 == $$ { print \$2 }")
+    printf "$(omz_f 1 31)Error:$(omz_f 22) Oh My Zsh can't be loaded from: $(omz_f 1)${shell}$(omz_f 22). "
+    printf "You need to run $(omz_f 1)zsh$(omz_f 22) instead.$(omz_f 0)\n"
+    printf "$(omz_f 33)Here's the process tree:$(omz_f 22)\n\n"
+    omz_ptree
+    printf "$(omz_f 0)\n"
+  } >&2
+
+  return 1
+}
+
+# Check if in emulation mode, if so early return
+# https://github.com/ohmyzsh/ohmyzsh/issues/11686
+[[ "$(emulate)" = zsh ]] || {
+  printf "$(omz_f 1 31)Error:$(omz_f 22) Oh My Zsh can't be loaded in \`$(emulate)\` emulation mode.$(omz_f 0)\n" >&2
+  return 1
+}
+
+unset -f omz_f
+
+# If ZSH is not defined, use the current script's directory.
+[[ -n "$ZSH" ]] || export ZSH="${${(%):-%x}:a:h}"
+
+# Set ZSH_CUSTOM to the path where your custom config files
+# and plugins exists, or else we will use the default custom/
+[[ -n "$ZSH_CUSTOM" ]] || ZSH_CUSTOM="$ZSH/custom"
+
+# Set ZSH_CACHE_DIR to the path where cache files should be created
+# or else we will use the default cache/
+[[ -n "$ZSH_CACHE_DIR" ]] || ZSH_CACHE_DIR="$ZSH/cache"
+
+# Make sure $ZSH_CACHE_DIR is writable, otherwise use a directory in $HOME
+if [[ ! -w "$ZSH_CACHE_DIR" ]]; then
+  ZSH_CACHE_DIR="${XDG_CACHE_HOME:-$HOME/.cache}/oh-my-zsh"
+fi
+
+# Create cache and completions dir and add to $fpath
+mkdir -p "$ZSH_CACHE_DIR/completions"
+(( ${fpath[(Ie)$ZSH_CACHE_DIR/completions]} )) || fpath=("$ZSH_CACHE_DIR/completions" $fpath)
+
+# Check for updates on initial load...
+source "$ZSH/tools/check_for_upgrade.sh"
+
+# Initializes Oh My Zsh
+
+# add a function path
+fpath=($ZSH/{functions,completions} $ZSH_CUSTOM/{functions,completions} $fpath)
+
+# Load all stock functions (from $fpath files) called below.
+autoload -U compaudit compinit zrecompile
+
+is_plugin() {
+  local base_dir=$1
+  local name=$2
+  builtin test -f $base_dir/plugins/$name/$name.plugin.zsh \
+    || builtin test -f $base_dir/plugins/$name/_$name
+}
+
+# Add all defined plugins to fpath. This must be done
+# before running compinit.
+for plugin ($plugins); do
+  if is_plugin "$ZSH_CUSTOM" "$plugin"; then
+    fpath=("$ZSH_CUSTOM/plugins/$plugin" $fpath)
+  elif is_plugin "$ZSH" "$plugin"; then
+    fpath=("$ZSH/plugins/$plugin" $fpath)
+  else
+    echo "[oh-my-zsh] plugin '$plugin' not found"
+  fi
+done
+
+# Figure out the SHORT hostname
+if [[ "$OSTYPE" = darwin* ]]; then
+  # macOS's $HOST changes with dhcp, etc. Use LocalHostName if possible.
+  SHORT_HOST=$(scutil --get LocalHostName 2>/dev/null) || SHORT_HOST="${HOST/.*/}"
+else
+  SHORT_HOST="${HOST/.*/}"
+fi
+
+# Save the location of the current completion dump file.
+if [[ -z "$ZSH_COMPDUMP" ]]; then
+  ZSH_COMPDUMP="${ZDOTDIR:-$HOME}/.zcompdump-${SHORT_HOST}-${ZSH_VERSION}"
+fi
+
+# Construct zcompdump OMZ metadata
+zcompdump_revision="#omz revision: $(builtin cd -q "$ZSH"; git rev-parse HEAD 2>/dev/null)"
+zcompdump_fpath="#omz fpath: $fpath"
+
+# Delete the zcompdump file if OMZ zcompdump metadata changed
+if ! command grep -q -Fx "$zcompdump_revision" "$ZSH_COMPDUMP" 2>/dev/null \
+   || ! command grep -q -Fx "$zcompdump_fpath" "$ZSH_COMPDUMP" 2>/dev/null; then
+  command rm -f "$ZSH_COMPDUMP"
+  zcompdump_refresh=1
+fi
+
+if [[ "$ZSH_DISABLE_COMPFIX" != true ]]; then
+  source "$ZSH/lib/compfix.zsh"
+  # Load only from secure directories
+  compinit -i -d "$ZSH_COMPDUMP"
+  # If completion insecurities exist, warn the user
+  handle_completion_insecurities &|
+else
+  # If the user wants it, load from all found directories
+  compinit -u -d "$ZSH_COMPDUMP"
+fi
+
+# Append zcompdump metadata if missing
+if (( $zcompdump_refresh )) \
+  || ! command grep -q -Fx "$zcompdump_revision" "$ZSH_COMPDUMP" 2>/dev/null; then
+  # Use `tee` in case the $ZSH_COMPDUMP filename is invalid, to silence the error
+  # See https://github.com/ohmyzsh/ohmyzsh/commit/dd1a7269#commitcomment-39003489
+  tee -a "$ZSH_COMPDUMP" &>/dev/null <<EOF
+
+$zcompdump_revision
+$zcompdump_fpath
+EOF
+fi
+unset zcompdump_revision zcompdump_fpath zcompdump_refresh
+
+# zcompile the completion dump file if the .zwc is older or missing.
+if command mkdir "${ZSH_COMPDUMP}.lock" 2>/dev/null; then
+  zrecompile -q -p "$ZSH_COMPDUMP"
+  command rm -rf "$ZSH_COMPDUMP.zwc.old" "${ZSH_COMPDUMP}.lock"
+fi
+
+_omz_source() {
+  local context filepath="$1"
+
+  # Construct zstyle context based on path
+  case "$filepath" in
+  lib/*) context="lib:${filepath:t:r}" ;;         # :t = lib_name.zsh, :r = lib_name
+  plugins/*) context="plugins:${filepath:h:t}" ;; # :h = plugins/plugin_name, :t = plugin_name
+  esac
+
+  local disable_aliases=0
+  zstyle -T ":omz:${context}" aliases || disable_aliases=1
+
+  # Back up alias names prior to sourcing
+  local -A aliases_pre galiases_pre
+  if (( disable_aliases )); then
+    aliases_pre=("${(@kv)aliases}")
+    galiases_pre=("${(@kv)galiases}")
+  fi
+
+  # Source file from $ZSH_CUSTOM if it exists, otherwise from $ZSH
+  if [[ -f "$ZSH_CUSTOM/$filepath" ]]; then
+    source "$ZSH_CUSTOM/$filepath"
+  elif [[ -f "$ZSH/$filepath" ]]; then
+    source "$ZSH/$filepath"
+  fi
+
+  # Unset all aliases that don't appear in the backed up list of aliases
+  if (( disable_aliases )); then
+    if (( #aliases_pre )); then
+      aliases=("${(@kv)aliases_pre}")
+    else
+      (( #aliases )) && unalias "${(@k)aliases}"
+    fi
+    if (( #galiases_pre )); then
+      galiases=("${(@kv)galiases_pre}")
+    else
+      (( #galiases )) && unalias "${(@k)galiases}"
+    fi
+  fi
+}
+
+# Load all of the lib files in ~/.oh-my-zsh/lib that end in .zsh
+# TIP: Add files you don't want in git to .gitignore
+for lib_file ("$ZSH"/lib/*.zsh); do
+  _omz_source "lib/${lib_file:t}"
+done
+unset lib_file
+
+# Load all of the plugins that were defined in ~/.zshrc
+for plugin ($plugins); do
+  _omz_source "plugins/$plugin/$plugin.plugin.zsh"
+done
+unset plugin
+
+# Load all of your custom configurations from custom/
+for config_file ("$ZSH_CUSTOM"/*.zsh(N)); do
+  source "$config_file"
+done
+unset config_file
+
+# Load the theme
+is_theme() {
+  local base_dir=$1
+  local name=$2
+  builtin test -f $base_dir/$name.zsh-theme
+}
+
+if [[ -n "$ZSH_THEME" ]]; then
+  if is_theme "$ZSH_CUSTOM" "$ZSH_THEME"; then
+    source "$ZSH_CUSTOM/$ZSH_THEME.zsh-theme"
+  elif is_theme "$ZSH_CUSTOM/themes" "$ZSH_THEME"; then
+    source "$ZSH_CUSTOM/themes/$ZSH_THEME.zsh-theme"
+  elif is_theme "$ZSH/themes" "$ZSH_THEME"; then
+    source "$ZSH/themes/$ZSH_THEME.zsh-theme"
+  else
+    echo "[oh-my-zsh] theme '$ZSH_THEME' not found"
+  fi
+fi
+
+# set completion colors to be the same as `ls`, after theme has been loaded
+[[ -z "$LS_COLORS" ]] || zstyle ':completion:*' list-colors "${(s.:.)LS_COLORS}"

.p10k.zsh

@@ -0,0 +1,199 @@
+# Generated by Powerlevel10k configuration wizard on 2024-05-17 at 10:37 CEST.
+# Based on romkatv/powerlevel10k/config/p10k-pure.zsh, checksum 35142.
+# Wizard options: nerdfont-v3 + powerline, small icons, pure, original, rprompt,
+# 2 lines, sparse, transient_prompt, instant_prompt=verbose.
+# Type `p10k configure` to generate another config.
+#
+# Config file for Powerlevel10k with the style of Pure (https://github.com/sindresorhus/pure).
+#
+# Differences from Pure:
+#
+#   - Git:
+#     - `@c4d3ec2c` instead of something like `v1.4.0~11` when in detached HEAD state.
+#     - No automatic `git fetch` (the same as in Pure with `PURE_GIT_PULL=0`).
+#
+# Apart from the differences listed above, the replication of Pure prompt is exact. This includes
+# even the questionable parts. For example, just like in Pure, there is no indication of Git status
+# being stale; prompt symbol is the same in command, visual and overwrite vi modes; when prompt
+# doesn't fit on one line, it wraps around with no attempt to shorten it.
+#
+# If you like the general style of Pure but not particularly attached to all its quirks, type
+# `p10k configure` and pick "Lean" style. This will give you slick minimalist prompt while taking
+# advantage of Powerlevel10k features that aren't present in Pure.
+
+# Temporarily change options.
+'builtin' 'local' '-a' 'p10k_config_opts'
+[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
+[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
+[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
+'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'
+
+() {
+  emulate -L zsh -o extended_glob
+
+  # Unset all configuration options.
+  unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR'
+
+  # Zsh >= 5.1 is required.
+  [[ $ZSH_VERSION == (5.<1->*|<6->.*) ]] || return
+
+  # Prompt colors.
+  local grey='242'
+  local red='1'
+  local yellow='3'
+  local blue='4'
+  local magenta='5'
+  local cyan='6'
+  local white='7'
+
+  # Left prompt segments.
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
+    # =========================[ Line #1 ]=========================
+    # context                 # user@host
+    dir                       # current directory
+    vcs                       # git status
+    # command_execution_time  # previous command duration
+    # =========================[ Line #2 ]=========================
+    newline                   # \n
+    # virtualenv              # python virtual environment
+    prompt_char               # prompt symbol
+  )
+
+  # Right prompt segments.
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
+    # =========================[ Line #1 ]=========================
+    command_execution_time    # previous command duration
+    virtualenv                # python virtual environment
+    context                   # user@host
+    # time                    # current time
+    # =========================[ Line #2 ]=========================
+    newline                   # \n
+  )
+
+  # Basic style options that define the overall prompt look.
+  typeset -g POWERLEVEL9K_BACKGROUND=                            # transparent background
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE=  # no surrounding whitespace
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' '  # separate segments with a space
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR=        # no end-of-line symbol
+  typeset -g POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION=           # no segment icons
+
+  # Add an empty line before each prompt except the first. This doesn't emulate the bug
+  # in Pure that makes prompt drift down whenever you use the Alt-C binding from fzf or similar.
+  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true
+
+  # Magenta prompt symbol if the last command succeeded.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS}_FOREGROUND=$magenta
+  # Red prompt symbol if the last command failed.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS}_FOREGROUND=$red
+  # Default prompt symbol.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
+  # Prompt symbol in command vi mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
+  # Prompt symbol in visual vi mode is the same as in command mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='❮'
+  # Prompt symbol in overwrite vi mode is the same as in command mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=false
+
+  # Grey Python Virtual Environment.
+  typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=$grey
+  # Don't show Python version.
+  typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false
+  typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER=
+
+  # Blue current directory.
+  typeset -g POWERLEVEL9K_DIR_FOREGROUND=$blue
+
+  # Context format when root: user@host. The first part white, the rest grey.
+  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE="%F{$white}%n%f%F{$grey}@%m%f"
+  # Context format when not root: user@host. The whole thing grey.
+  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE="%F{$grey}%n@%m%f"
+  # Don't show context unless root or in SSH.
+  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_CONTENT_EXPANSION=
+
+  # Show previous command duration only if it's >= 5s.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=5
+  # Don't show fractional seconds. Thus, 7s rather than 7.3s.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
+  # Duration format: 1d 2h 3m 4s.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
+  # Yellow previous command duration.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=$yellow
+
+  # Grey Git prompt. This makes stale prompts indistinguishable from up-to-date ones.
+  typeset -g POWERLEVEL9K_VCS_FOREGROUND=$grey
+
+  # Disable async loading indicator to make directories that aren't Git repositories
+  # indistinguishable from large Git repositories without known state.
+  typeset -g POWERLEVEL9K_VCS_LOADING_TEXT=
+
+  # Don't wait for Git status even for a millisecond, so that prompt always updates
+  # asynchronously when Git state changes.
+  typeset -g POWERLEVEL9K_VCS_MAX_SYNC_LATENCY_SECONDS=0
+
+  # Cyan ahead/behind arrows.
+  typeset -g POWERLEVEL9K_VCS_{INCOMING,OUTGOING}_CHANGESFORMAT_FOREGROUND=$cyan
+  # Don't show remote branch, current tag or stashes.
+  typeset -g POWERLEVEL9K_VCS_GIT_HOOKS=(vcs-detect-changes git-untracked git-aheadbehind)
+  # Don't show the branch icon.
+  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=
+  # When in detached HEAD state, show @commit where branch normally goes.
+  typeset -g POWERLEVEL9K_VCS_COMMIT_ICON='@'
+  # Don't show staged, unstaged, untracked indicators.
+  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED}_ICON=
+  # Show '*' when there are staged, unstaged or untracked files.
+  typeset -g POWERLEVEL9K_VCS_DIRTY_ICON='*'
+  # Show '⇣' if local branch is behind remote.
+  typeset -g POWERLEVEL9K_VCS_INCOMING_CHANGES_ICON=':⇣'
+  # Show '⇡' if local branch is ahead of remote.
+  typeset -g POWERLEVEL9K_VCS_OUTGOING_CHANGES_ICON=':⇡'
+  # Don't show the number of commits next to the ahead/behind arrows.
+  typeset -g POWERLEVEL9K_VCS_{COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=1
+  # Remove space between '⇣' and '⇡' and all trailing spaces.
+  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${${${P9K_CONTENT/⇣* :⇡/⇣⇡}// }//:/ }'
+
+  # Grey current time.
+  typeset -g POWERLEVEL9K_TIME_FOREGROUND=$grey
+  # Format for the current time: 09:51:02. See `man 3 strftime`.
+  typeset -g POWERLEVEL9K_TIME_FORMAT='%D{%H:%M:%S}'
+  # If set to true, time will update when you hit enter. This way prompts for the past
+  # commands will contain the start times of their commands rather than the end times of
+  # their preceding commands.
+  typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=false
+
+  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
+  # when accepting a command line. Supported values:
+  #
+  #   - off:      Don't change prompt when accepting a command line.
+  #   - always:   Trim down prompt when accepting a command line.
+  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
+  #               typed after changing current working directory.
+  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=always
+
+  # Instant prompt mode.
+  #
+  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
+  #              it incompatible with your zsh configuration files.
+  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
+  #              during zsh initialization. Choose this if you've read and understood
+  #              https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
+  #   - verbose: Enable instant prompt and print a warning when detecting console output during
+  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
+  #              seen the warning, or if you are unsure what this all means.
+  typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose
+
+  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
+  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
+  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
+  # really need it.
+  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true
+
+  # If p10k is already loaded, reload configuration.
+  # This works even with POWERLEVEL9K_DISABLE_HOT_RELOAD=true.
+  (( ! $+functions[p10k] )) || p10k reload
+}
+
+# Tell `p10k configure` which file it should overwrite.
+typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a}
+
+(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
+'builtin' 'unset' 'p10k_config_opts'

.zshrc

@@ -0,0 +1,126 @@
+# If you come from bash you might have to change your $PATH.
+# export PATH=$HOME/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+export PATH="$HOME/.local/bin:$PATH"
+
+# Path to your Oh My Zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+export FZF_DEFAULT_OPTS=" \
+--color=bg+:#363A4F,bg:#24273A,spinner:#F4DBD6,hl:#ED8796 \
+--color=fg:#CAD3F5,header:#ED8796,info:#C6A0F6,pointer:#F4DBD6 \
+--color=marker:#B7BDF8,fg+:#CAD3F5,prompt:#C6A0F6,hl+:#ED8796 \
+--color=selected-bg:#494D64 \
+--color=border:#6E738D,label:#CAD3F5"
+
+# Set name of the theme to load --- if set to "random", it will
+# load a random theme each time Oh My Zsh is loaded, in which case,
+# to know which specific one was loaded, run: echo $RANDOM_THEME
+# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
+ZSH_THEME="robbyrussell"
+
+# Set list of themes to pick from when loading at random
+# Setting this variable when ZSH_THEME=random will cause zsh to load
+# a theme from this variable instead of looking in $ZSH/themes/
+# If set to an empty array, this variable will have no effect.
+# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
+
+# Uncomment the following line to use case-sensitive completion.
+# CASE_SENSITIVE="true"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+# Uncomment one of the following lines to change the auto-update behavior
+# zstyle ':omz:update' mode disabled  # disable automatic updates
+# zstyle ':omz:update' mode auto      # update automatically without asking
+# zstyle ':omz:update' mode reminder  # just remind me to update when it's time
+
+# Uncomment the following line to change how often to auto-update (in days).
+# zstyle ':omz:update' frequency 13
+
+# Uncomment the following line if pasting URLs and other text is messed up.
+# DISABLE_MAGIC_FUNCTIONS="true"
+
+# Uncomment the following line to disable colors in ls.
+# DISABLE_LS_COLORS="true"
+
+# Uncomment the following line to disable auto-setting terminal title.
+# DISABLE_AUTO_TITLE="true"
+
+# Uncomment the following line to enable command auto-correction.
+# ENABLE_CORRECTION="true"
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+# COMPLETION_WAITING_DOTS="true"
+
+# Uncomment the following line if you want to disable marking untracked files
+# under VCS as dirty. This makes repository status check for large repositories
+# much, much faster.
+# DISABLE_UNTRACKED_FILES_DIRTY="true"
+
+# Uncomment the following line if you want to change the command execution time
+# stamp shown in the history command output.
+# You can set one of the optional three formats:
+# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
+# or set a custom format using the strftime function format specifications,
+# see 'man strftime' for details.
+# HIST_STAMPS="mm/dd/yyyy"
+
+# Would you like to use another custom folder than $ZSH/custom?
+# ZSH_CUSTOM=/path/to/new-custom-folder
+
+# Which plugins would you like to load?
+# Standard plugins can be found in $ZSH/plugins/
+# Custom plugins may be added to $ZSH_CUSTOM/plugins/
+# Example format: plugins=(rails git textmate ruby lighthouse)
+# Add wisely, as too many plugins slow down shell startup.
+plugins=(
+  git
+  fast-syntax-highlighting
+  zsh-autosuggestions
+)
+
+source $ZSH/oh-my-zsh.sh
+
+# User configuration
+
+# export MANPATH="/usr/local/man:$MANPATH"
+
+# You may need to manually set your language environment
+# export LANG=en_US.UTF-8
+
+# Preferred editor for local and remote sessions
+# if [[ -n $SSH_CONNECTION ]]; then
+#   export EDITOR='vim'
+# else
+#   export EDITOR='nvim'
+# fi
+
+source ~/.config/zsh/config
+
+export EDITOR="nvim"
+
+# GPG Key - uncommunt if needed
+export GPG_TTY=$(tty)
+
+# Compilation flags
+# export ARCHFLAGS="-arch $(uname -m)"
+
+# Set personal aliases, overriding those provided by Oh My Zsh libs,
+# plugins, and themes. Aliases can be placed here, though Oh My Zsh
+# users are encouraged to define aliases within a top-level file in
+# the $ZSH_CUSTOM folder, with .zsh extension. Examples:
+# - $ZSH_CUSTOM/aliases.zsh
+# - $ZSH_CUSTOM/macos.zsh
+# For a full list of active aliases, run `alias`.
+#
+# Example aliases
+# alias zshconfig="mate ~/.zshrc"
+
+source ~/.config/zsh/aliases
+
+eval "$(zoxide init --cmd cd zsh)"
+eval "$(~/.local/bin/mise activate zsh --shims)"

README.md

@@ -1,15 +1,61 @@
 # Dotfiles
 🏠 - Personal Dotfiles (Managed by GNU Stow)
 
-## Arch
-[install here](https://github.com/Thomas-Philippot/dotfiles/tree/arch)
+![1](https://github.com/user-attachments/assets/692a80a3-756a-4118-9350-47acc3e37710)
+![2](https://github.com/user-attachments/assets/494c8923-c580-49d6-9ca7-950a8b6b06ba)
+![3](https://github.com/user-attachments/assets/34735b0c-7a0e-40bf-86d4-84498e740fc3)
 
-### Specs
-- Azerty Keyboard layout and french system language.
-- Desktop environment. (no battery, wifi or brightness controls)
 
-## Ubuntu 24.04
-[install here](https://github.com/Thomas-Philippot/dotfiles/tree/ubuntu-24)
-### Specs
-- Us keyboard layout and English system language.
-- Laptop environment. (battery, wifi and brightness controls)
+## Overview
+
+- **DE**: [Hyprland](https://hyprland.com)
+- **OS**: [Fedora Linux](https://fedoraproject.org/fr/)
+- **Shell**: ZSH
+  - **Framework**: [oh-my-zsh](https://ohmyz.sh/)
+  - **Prompt**: [p10k](https://github.com/romkatv/powerlevel10k)
+- **Applications**:
+  - **Spotify**: [Spicetify](https://spicetify.app/)
+  - **Discord**: [vesktop](https://vesktop.dev)
+- **Terminal**: [kitty](https://github.com/kovidgoyal/kitty)
+- **Editor**: [Neovim](https://github.com/neovim/neovim/) (using [LazyNvim](https://www.lazyvim.org/) configuration)
+- **Browser**: [Zen](https://zen-browser.app/)
+- **Fonts**: Jetbrains Mono, Fira Code Mono [Nerd Font](https://www.nerdfonts.com/)
+- **Icons**:
+  - **Cursor**: [Catppuccin Cursor](https://github.com/catppuccin/cursors), [Phinger Cursors](https://github.com/phisch/phinger-cursors)
+- **Colorscheme**: [Catppuccin](https://github.com/catppuccin/catppuccin) Dark : Macchiato / Light : Latte
+- **Keyboard Layout**: FR-fr (AZERTY)
+- **System Language**: English
+
+## Installation
+
+### Prerequisites
+
+- [Stow](https://www.gnu.org/software/stow/)
+- [Git](https://git-scm.com)
+- [Zoxide](https://github.com/ajeetdsouza/zoxide)
+- [Eza](https://eza.rocks)
+- [Hyprshot](https://github.com/Gustash/hyprshot)
+- [Noctalia](https://noctalia.dev)
+- [wl-clipboard](https://github.com/bugaevc/wl-clipboard)
+
+clone the repo into your `$HOME` folder and let stow do its magic !
+
+````
+git clone https://github.com/Thomas-Philippot/dotfiles
+cd dotfiles
+stow .
+``````
+
+all the files should now be simlinked to your $HOME folder
+
+### Theme switcher
+
+user the <kbd>SUPER</kbd> + <kbd>T</kbd> shortcut to switch between light and dark theme
+
+### Issues
+
+bat might not apply the catppuccin theme at launch, because you need to rebuild it's cache
+
+```
+bat cache --build
+```