Update README.md

.config/bat/config

@@ -1 +0,0 @@
---theme=noctalia

.config/cava/config

@@ -1,280 +0,0 @@
-## Configuration file for CAVA.
-# Remove the ; to change parameters.
-
-
-[general]
-
-# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
-; mode = normal
-
-# Accepts only non-negative values.
-; framerate = 60
-
-# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
-# new as of 0.6.0 autosens of low values (dynamic range)
-# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
-; autosens = 1
-; overshoot = 20
-
-# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
-# 200 means double height. Accepts only non-negative values.
-; sensitivity = 100
-
-# The number of bars (0-512). 0 sets it to auto (fill up console).
-# Bars' width and space between bars in number of characters.
-; bars = 0
-; bar_width = 2
-; bar_spacing = 1
-# bar_height is only used for output in "noritake" format
-; bar_height = 32
-
-# For SDL width and space between bars is in pixels, defaults are:
-; bar_width = 20
-; bar_spacing = 5
-
-# sdl_glsl have these default values, they are only used to calulate max number of bars.
-; bar_width = 1
-; bar_spacing = 0
-
-
-# Lower and higher cutoff frequencies for lowest and highest bars
-# the bandwidth of the visualizer.
-# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
-# Cava will automatically increase the higher cutoff if a too low band is specified.
-; lower_cutoff_freq = 50
-; higher_cutoff_freq = 10000
-
-
-# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
-# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
-; sleep_timer = 0
-
-
-[input]
-
-# Audio capturing method. Possible methods are: 'fifo', 'portaudio', 'pipewire', 'alsa', 'pulse', 'sndio', 'oss', 'jack' or 'shmem'
-# Defaults to 'oss', 'pipewire', 'sndio', 'jack', 'pulse', 'alsa', 'portaudio' or 'fifo', in that order, dependent on what support cava was built with.
-# On Mac it defaults to 'portaudio' or 'fifo'
-# On windows this is automatic and no input settings are needed.
-#
-# All input methods uses the same config variable 'source'
-# to define where it should get the audio.
-#
-# For pulseaudio and pipewire 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
-# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
-#
-# For pipewire 'source' will be the object name or object.serial of the device to capture from.
-# Both input and output devices are supported.
-#
-# For alsa 'source' will be the capture device.
-# For fifo 'source' will be the path to fifo-file.
-# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
-#
-# For sndio 'source' will be a raw recording audio descriptor or a monitoring sub-device, e.g. 'rsnd/2' or 'snd/1'. Default: 'default'.
-# README.md contains further information on how to setup CAVA for sndio.
-#
-# For oss 'source' will be the path to a audio device, e.g. '/dev/dsp2'. Default: '/dev/dsp', i.e. the default audio device.
-# README.md contains further information on how to setup CAVA for OSS on FreeBSD.
-#
-# For jack 'source' will be the name of the JACK server to connect to, e.g. 'foobar'. Default: 'default'.
-# README.md contains further information on how to setup CAVA for JACK.
-#
-; method = pulse
-; source = auto
-
-; method = pipewire
-; source = auto
-
-; method = alsa
-; source = hw:Loopback,1
-
-; method = fifo
-; source = /tmp/mpd.fifo
-
-; method = shmem
-; source = /squeezelite-AA:BB:CC:DD:EE:FF
-
-; method = portaudio
-; source = auto
-
-; method = sndio
-; source = default
-
-; method = oss
-; source = /dev/dsp
-
-; method = jack
-; source = default
-
-# The options 'sample_rate', 'sample_bits', 'channels' and 'autoconnect' can be configured for some input methods:
-#   sample_rate: fifo, pipewire, sndio, oss
-#   sample_bits: fifo, pipewire, sndio, oss
-#   channels:    sndio, oss, jack
-#   autoconnect: jack
-# Other methods ignore these settings.
-#
-# For 'sndio' and 'oss' they are only preferred values, i.e. if the values are not supported
-# by the chosen audio device, the device will use other supported values instead.
-# Example: 48000, 32 and 2, but the device only supports 44100, 16 and 1, then it
-# will use 44100, 16 and 1.
-#
-; sample_rate = 44100
-; sample_bits = 16
-; channels = 2
-; autoconnect = 2
-
-
-[output]
-
-# Output method. Can be 'ncurses', 'noncurses', 'raw', 'noritake', 'sdl'
-# or 'sdl_glsl'.
-# 'noncurses' (default) uses a buffer and cursor movements to only print
-# changes from frame to frame in the terminal. Uses less resources and is less
-# prone to tearing (vsync issues) than 'ncurses'.
-#
-# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
-# stream of the bar heights that can be used to send to other applications.
-# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
-#
-# 'noritake' outputs a bitmap in the format expected by a Noritake VFD display
-#  in graphic mode. It only support the 3000 series graphical VFDs for now.
-#
-# 'sdl' uses the Simple DirectMedia Layer to render in a graphical context.
-# 'sdl_glsl' uses SDL to create an OpenGL context. Write your own shaders or
-# use one of the predefined ones.
-; method = noncurses
-
-# Orientation of the visualization. Can be 'bottom', 'top', 'left' or 'right'.
-# Default is 'bottom'. Other orientations are only supported on sdl and ncruses
-# output. Note: many fonts have weird glyphs for 'top' and 'right' characters,
-# which can make ncurses not look right.
-; orientation = bottom
-
-# Visual channels. Can be 'stereo' or 'mono'.
-# 'stereo' mirrors both channels with low frequencies in center.
-# 'mono' outputs left to right lowest to highest frequencies.
-# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
-# set 'reverse' to 1 to display frequencies the other way around.
-; channels = stereo
-; mono_option = average
-; reverse = 0
-
-# Raw output target. A fifo will be created if target does not exist.
-; raw_target = /dev/stdout
-
-# Raw data format. Can be 'binary' or 'ascii'.
-; data_format = binary
-
-# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
-; bit_format = 16bit
-
-# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
-; ascii_max_range = 1000
-
-# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
-# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
-; bar_delimiter = 59
-; frame_delimiter = 10
-
-# sdl window size and position. -1,-1 is centered.
-; sdl_width = 1000
-; sdl_height = 500
-; sdl_x = -1
-; sdl_y= -1
-; sdl_full_screen = 0
-
-# set label on bars on the x-axis. Can be 'frequency' or 'none'. Default: 'none'
-# 'frequency' displays the lower cut off frequency of the bar above.
-# Only supported on ncurses and noncurses output.
-; xaxis = none
-
-# enable alacritty synchronized updates. 1 = on, 0 = off
-# removes flickering in alacritty terminal emulator.
-# defaults to off since the behaviour in other terminal emulators is unknown
-; alacritty_sync = 0
-
-# Shaders for sdl_glsl, located in $HOME/.config/cava/shaders
-; vertex_shader = pass_through.vert
-; fragment_shader = bar_spectrum.frag
-
-; for glsl output mode, keep rendering even if no audio
-; continuous_rendering = 0
-
-# disable console blank (screen saver) in tty
-# (Not supported on FreeBSD)
-; disable_blanking = 0
-
-# show a flat bar at the bottom of the screen when idle, 1 = on, 0 = off
-; show_idle_bar_heads = 1
-
-# show waveform instead of frequency spectrum, 1 = on, 0 = off
-; waveform = 0
-
-[color]
-theme = "noctalia"
-
-# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
-# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
-# a terminal that can change color definitions such as Gnome-terminal or rxvt.
-# default is to keep current terminal color
-; background = default
-; foreground = default
-
-# SDL and sdl_glsl only support hex code colors, these are the default:
-; background = '#111111'
-; foreground = '#33ffff'
-
-
-# Gradient mode, only hex defined colors are supported,
-# background must also be defined in hex or remain commented out. 1 = on, 0 = off.
-# You can define as many as 8 different colors. They range from bottom to top of screen
-; gradient = 0
-; gradient_count = 8
-; gradient_color_1 = '#59cc33'
-; gradient_color_2 = '#80cc33'
-; gradient_color_3 = '#a6cc33'
-; gradient_color_4 = '#cccc33'
-; gradient_color_5 = '#cca633'
-; gradient_color_6 = '#cc8033'
-; gradient_color_7 = '#cc5933'
-; gradient_color_8 = '#cc3333'
-
-
-
-[smoothing]
-
-# Percentage value for integral smoothing. Takes values from 0 - 100.
-# Higher values means smoother, but less precise. 0 to disable.
-# DEPRECATED as of 0.8.0, use noise_reduction instead
-; integral = 77
-
-# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
-; monstercat = 0
-; waves = 0
-
-# Set gravity percentage for "drop off". Higher values means bars will drop faster.
-# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
-# DEPRECATED as of 0.8.0, use noise_reduction instead
-; gravity = 100
-
-
-# In bar height, bars that would have been lower that this will not be drawn.
-# DEPRECATED as of 0.8.0
-; ignore = 0
-
-# Noise reduction, int 0 - 100. default 77
-# the raw visualization is very noisy, this factor adjusts the integral and gravity filters to keep the signal smooth
-# 100 will be very slow and smooth, 0 will be fast but noisy.
-; noise_reduction = 77
-
-
-[eq]
-
-# This one is tricky. You can have as much keys as you want.
-# Remember to uncomment more than one key! More keys = more precision.
-# Look at readme.md on github for further explanations and examples.
-; 1 = 1 # bass
-; 2 = 1
-; 3 = 1 # midtone
-; 4 = 1
-; 5 = 1 # treble

.config/hypr/.gitignore

@@ -1 +0,0 @@
-

.config/hypr/.luarc.json

@@ -1,10 +0,0 @@
-{
-  "workspace": {
-    "library": [
-      "/usr/share/hypr/stubs"
-    ]
-  },
-  "diagnostics": {
-    "globals": ["hl"]
-  }
-}

.config/hypr/custom/autostart.lua

@@ -1,6 +0,0 @@
--- User-specific autostart. Loaded after hyprland/autostart.lua.
-
-hl.on("hyprland.start", function()
-  hl.exec_cmd("dbus-update-activation-environment --systemd --all")
-  hl.exec_cmd("systemctl --user start hyprland-session.target")
-end)

.config/hypr/custom/environments.lua

@@ -1 +0,0 @@
--- User-specific environment variables. Loaded after hyprland/environments.lua.

.config/hypr/custom/inputs.lua

@@ -1,3 +0,0 @@
--- User-specific input config (kb_layout, per-device, gestures). Loaded after hyprland/inputs.lua.
-
-hl.device({ name = "logitech-g-pro--1", sensitivity = -0.8 })

.config/hypr/custom/keybinds.lua

@@ -1 +0,0 @@
--- User-specific keybinds. Loaded after hyprland/keybinds.lua.

.config/hypr/custom/monitors.lua

@@ -1,6 +0,0 @@
--- User-specific monitor overrides. Loaded after hyprland/monitors.lua.
-
-hl.monitor({ output = "eDP-1", mode = "2256x1504@60", position = "auto", scale = 1.33, bitdepth = 10, vrr = 1 })
-hl.monitor({ output = "DP-3", mode = "3440x1440@99", position = "auto", scale = 1, bitdepth = 10, vrr = 1 })
-hl.monitor({ output = "DP-4", mode = "4096x2160@120", position = "auto", scale = 1.33, bitdepth = 10, vrr = 1 })
-

.config/hypr/custom/windowrules.lua

@@ -1,2 +0,0 @@
--- User-specific windowrules. Loaded after hyprland/windowrules.lua.
-require("custom/windowrules/godot")

.config/hypr/custom/windowrules/godot.lua

@@ -1,51 +0,0 @@
--- Godot application windowrules --
-
-hl.window_rule({
-	name = "Resize Godot confirmation dialogs",
-	match = {
-		class = "org.godotengine.Editor",
-		float = true,
-	},
-	size = { "monitor_w * 0.15", "monitor_h * 0.1" },
-	center = true,
-})
-
-hl.window_rule({
-    name = "Resize New node dialog",
-    match = {
-        class = "org.godotengine.Editor",
-        title = "Créer un nouveau Node",
-    },
-    size = { 1000, 750 },
-})
-
-hl.window_rule({
-    name = "Resize Region edit dialog",
-    match = {
-        class = "org.godotengine.Editor",
-        title = "Éditeur de régions",
-    },
-    size = { 1500, 1000 },
-})
-
-hl.window_rule({
-    name = "Resize Region edit dialog",
-    match = {
-        class = "org.godotengine.Editor",
-        title = "Sélectionner une scène",
-    },
-    size = { 550, 450 },
-})
-
-
-
-hl.window_rule({
-	name = "Floating DEBUG window",
-	match = {
-		class = "org.godotengine.Editor",
-		title = ".*DEBUG.*",
-	},
-	size = { 1280, 720 },
-	float = true,
-	center = true,
-})

.config/hypr/custom/workspacerules.lua

@@ -1,4 +0,0 @@
-hl.workspace_rule({ workspace = "1", monitor = "eDP-1", persistent = true, default_name = "web" })
---hl.workspace_rule({ workspace = "2", monitor = "eDP-1", persistent = true, default_name = "code" })
--- hl.workspace_rule({ workspace = "3", monitor = "eDP-1", persistent = true, default_name = "chat" })
--- hl.workspace_rule({ workspace = "4", monitor = "eDP-1", persistent = true, default_name = "game" })

.config/hypr/hyprland.lua

@@ -1,30 +0,0 @@
--- ##############################################################
--- MY SUPER HYPRLAND CONFIG.
--- https://wiki.hypr.land/Configuring/
---
--- Do not edit files in `hyprland/` (shared defaults across all
--- users). Put any changes in the matching file under `custom/`,
--- which is loaded after and overrides the defaults.
--- ##############################################################
-
--- Defaults (do not edit) --
-require("hyprland/monitors")
-require("hyprland/environments")
-require("hyprland/autostart")
-require("hyprland/permissions")
-require("hyprland/look-and-feel")
-require("hyprland/inputs")
-require("hyprland/keybinds")
-require("hyprland/windowrules")
-
--- Custom --
-require("custom/autostart")
-require("custom/monitors")
-require("custom/environments")
-require("custom/inputs")
-require("custom/keybinds")
-require("custom/windowrules")
-require("custom/workspacerules")
-
--- For Noctalia Color templates
-require("noctalia").apply_theme()

.config/hypr/hyprland/autostart.lua

@@ -1,6 +0,0 @@
--- https://wiki.hypr.land/Configuring/Autostart/
--- Shared defaults — do not edit. Add user-specific autostart in custom/autostart.lua.
-
-hl.on("hyprland.start", function()
-  hl.exec_cmd("noctalia")
-end)

.config/hypr/hyprland/environments.lua

@@ -1,2 +0,0 @@
--- https://wiki.hypr.land/Configuring/Environment-variables/
--- Shared defaults — do not edit. Add user-specific env vars in custom/environments.lua.

.config/hypr/hyprland/inputs.lua

@@ -1,20 +0,0 @@
--- https://wiki.hypr.land/Configuring/Variables/#input
--- Shared defaults — do not edit. Add user-specific input config in custom/inputs.lua.
-
-hl.config({
-  input = {
-    kb_layout = "fr",
-    kb_variant = "",
-    kb_model = "",
-    kb_options = "",
-    kb_rules = "",
-    follow_mouse = 1,
-    sensitivity = 0,
-    touchpad = {
-      natural_scroll = false,
-    },
-  },
-})
-
--- https://wiki.hypr.land/Configuring/Gestures
-hl.gesture({ fingers = 3, direction = "horizontal", action = "workspace" })

.config/hypr/hyprland/keybinds.lua

@@ -1,99 +0,0 @@
--- https://wiki.hypr.land/Configuring/Binds/
--- Shared defaults — do not edit. Add user-specific keybindings in custom/keybinds.lua.
-
-local mainMod = "SUPER"
-local terminal = "kitty"
-local fileMgr = "nautilus"
-local ipc = "noctalia msg"
-
-hl.bind("CTRL + ALT + T", hl.dsp.exec_cmd(terminal))
-hl.bind(mainMod .. " + C", hl.dsp.window.close())
-hl.bind(mainMod .. " + M", hl.dsp.exit())
-hl.bind(mainMod .. " + E", hl.dsp.exec_cmd(fileMgr))
-hl.bind(mainMod .. " + V", hl.dsp.window.float({ action = "toggle" }))
-hl.bind(mainMod .. " + F", hl.dsp.window.fullscreen({ mode = "maximized", state = "toggle" }))
-hl.bind(mainMod .. " + CTRL + F", hl.dsp.window.fullscreen({ mode = "fullscreen", state = "toggle" }))
-hl.bind(mainMod .. " + P", hl.dsp.window.pseudo())
-hl.bind(mainMod .. " + U", hl.dsp.layout("togglesplit"))
-hl.bind(mainMod .. " + H", hl.dsp.layout("swapsplit"))
-
--- Focus: arrow keys + IJKL
-for _, m in ipairs({
-	{ "left", "l" },
-	{ "right", "r" },
-	{ "up", "u" },
-	{ "down", "d" },
-	{ "J", "l" },
-	{ "L", "r" },
-	{ "I", "u" },
-	{ "K", "d" },
-}) do
-	hl.bind(mainMod .. " + " .. m[1], hl.dsp.focus({ direction = m[2] }))
-end
-
--- Workspaces 1..10: digit + AZERTY keysym, plus SHIFT to move active window
-local azerty = {
-	"ampersand",
-	"eacute",
-	"quotedbl",
-	"apostrophe",
-	"parenleft",
-	"minus",
-	"egrave",
-	"underscore",
-	"ccedilla",
-	"agrave",
-}
-for i = 1, 10 do
-	local digit = (i == 10) and "0" or tostring(i)
-	hl.bind(mainMod .. " + " .. digit, hl.dsp.focus({ workspace = i }))
-	hl.bind(mainMod .. " + " .. azerty[i], hl.dsp.focus({ workspace = i }))
-	hl.bind(mainMod .. " + SHIFT + " .. azerty[i], hl.dsp.window.move({ workspace = i }))
-end
-
--- Mouse scroll between workspaces
-hl.bind(mainMod .. " + mouse_down", hl.dsp.focus({ workspace = "e+1" }))
-hl.bind(mainMod .. " + mouse_up", hl.dsp.focus({ workspace = "e-1" }))
-
--- Mouse drag / resize
-hl.bind(mainMod .. " + mouse:272", hl.dsp.window.drag(), { mouse = true })
-hl.bind(mainMod .. " + mouse:273", hl.dsp.window.resize(), { mouse = true })
-
--- Volume / brightness
-for _, b in ipairs({
-	{ "XF86AudioRaiseVolume", "wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+" },
-	{ "XF86AudioLowerVolume", "wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-" },
-	{ "XF86AudioMute", "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle" },
-	{ "XF86AudioMicMute", "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle" },
-	{ "XF86MonBrightnessUp", "brightnessctl -e4 -n2 set 5%+" },
-	{ "XF86MonBrightnessDown", "brightnessctl -e4 -n2 set 5%-" },
-}) do
-	hl.bind(b[1], hl.dsp.exec_cmd(b[2]), { locked = true, repeating = true })
-end
-
--- Media player
-for _, b in ipairs({
-	{ "XF86AudioNext", "playerctl next" },
-	{ "XF86AudioPause", "playerctl play-pause" },
-	{ "XF86AudioPlay", "playerctl play-pause" },
-	{ "XF86AudioPrev", "playerctl previous" },
-}) do
-	hl.bind(b[1], hl.dsp.exec_cmd(b[2]), { locked = true })
-end
-
--- Screenshot
--- hl.bind("Print", hl.dsp.exec_cmd("hyprshot -m region"), { locked = true })
--- hl.bind("CTRL + Print", hl.dsp.exec_cmd("hyprshot -m output -m active"), { locked = true })
-
-hl.bind("XF86Calculator", hl.dsp.exec_cmd("gnome-calculator"))
-
--- Noctalia IPC
-hl.bind(mainMod .. " + SPACE", hl.dsp.exec_cmd(ipc .. " panel-toggle launcher"))
-hl.bind(mainMod .. " + S", hl.dsp.exec_cmd(ipc .. " panel-toggle control-center"))
-hl.bind(mainMod .. " + T", hl.dsp.exec_cmd(ipc .. " theme-mode-toggle"))
-hl.bind(mainMod .. " + W", hl.dsp.exec_cmd(ipc .. " panel-toggle noctalia/wallhaven:browser"))
-hl.bind(mainMod .. " + SHIFT + L", hl.dsp.exec_cmd(ipc .. " session lock"))
-hl.bind("switch:Lid Switch", hl.dsp.exec_cmd(ipc .. " session lock"), { locked = true })
-hl.bind(mainMod .. " + R", hl.dsp.exec_cmd(ipc .. " plugin noctalia/screen_recorder:service all toggle"))
-hl.bind("Print", hl.dsp.exec_cmd(ipc .. " screenshot-region"), { locked = true })
-hl.bind("CTRL + Print", hl.dsp.exec_cmd(ipc .. " screenshot-fullscreen pick"))

.config/hypr/hyprland/look-and-feel.lua

@@ -1,87 +0,0 @@
--- https://wiki.hypr.land/Configuring/Variables/
--- Shared defaults — do not edit. No custom/look-and-feel.lua override exists; add one if needed.
-
-hl.config({
-  general = {
-    gaps_in  = 5,
-    gaps_out = 10,
-    border_size = 2,
-    col = {
-      active_border   = { colors = {"rgba(33ccffee)", "rgba(00ff99ee)"}, angle = 45 },
-      inactive_border = "rgba(595959aa)",
-    },
-    resize_on_border = false,
-    allow_tearing = false,
-    layout = "dwindle",
-  },
-
-  decoration = {
-    rounding       = 12,
-    rounding_power = 2,
-    active_opacity   = 1.0,
-    inactive_opacity = 1.0,
-    shadow = {
-      enabled = true,
-      range = 30,
-      render_power = 5,
-      offset = "0 5",
-      color = "rgba(00000070)",
-    },
-    blur = {
-      enabled = false,
-      size = 3,
-      passes = 1,
-      vibrancy = 0.1696,
-    },
-  },
-
-  animations = {
-    enabled = true,
-  },
-
-  dwindle = {
-    preserve_split = true,
-  },
-
-  master = {
-    new_status = "master",
-    mfact = 0.5,
-  },
-
-  scrolling = {
-    fullscreen_on_one_column = true,
-  },
-
-  misc = {
-    disable_splash_rendering = true,
-    force_default_wallpaper = 0,
-    disable_hyprland_logo = true,
-  },
-
-  xwayland = {
-    force_zero_scaling = true,
-  },
-})
-
--- Default curves and animations. See https://wiki.hypr.land/Configuring/Animations/
-hl.curve("easeOutQuint",   { type = "bezier", points = { {0.23, 1},    {0.32, 1} } })
-hl.curve("easeInOutCubic", { type = "bezier", points = { {0.65, 0.05}, {0.36, 1} } })
-hl.curve("linear",         { type = "bezier", points = { {0, 0},       {1, 1}    } })
-hl.curve("almostLinear",   { type = "bezier", points = { {0.5, 0.5},   {0.75, 1} } })
-hl.curve("quick",          { type = "bezier", points = { {0.15, 0},    {0.1, 1}  } })
-hl.curve("easy",           { type = "spring", mass = 1, stiffness = 71.2633, dampening = 15.8273644 })
-
-hl.animation({ leaf = "global",        enabled = true, speed = 10,   bezier = "default" })
-hl.animation({ leaf = "border",        enabled = true, speed = 5.39, bezier = "easeOutQuint" })
-hl.animation({ leaf = "windows",       enabled = true, speed = 4.79, spring = "easy" })
-hl.animation({ leaf = "windowsIn",     enabled = true, speed = 4.1,  spring = "easy",         style = "popin 87%" })
-hl.animation({ leaf = "windowsOut",    enabled = true, speed = 1.49, bezier = "linear",       style = "popin 87%" })
-hl.animation({ leaf = "fadeIn",        enabled = true, speed = 1.73, bezier = "almostLinear" })
-hl.animation({ leaf = "fadeOut",       enabled = true, speed = 1.46, bezier = "almostLinear" })
-hl.animation({ leaf = "fade",          enabled = true, speed = 3.03, bezier = "quick" })
-hl.animation({ leaf = "layers",        enabled = true, speed = 3.81, bezier = "easeOutQuint" })
-hl.animation({ leaf = "layersIn",      enabled = true, speed = 4,    bezier = "easeOutQuint", style = "fade" })
-hl.animation({ leaf = "layersOut",     enabled = true, speed = 1.5,  bezier = "linear",       style = "fade" })
-hl.animation({ leaf = "fadeLayersIn",  enabled = true, speed = 1.79, bezier = "almostLinear" })
-hl.animation({ leaf = "fadeLayersOut", enabled = true, speed = 1.39, bezier = "almostLinear" })
-hl.animation({ leaf = "zoomFactor",    enabled = true, speed = 7,    bezier = "quick" })

.config/hypr/hyprland/monitors.lua

@@ -1,4 +0,0 @@
--- https://wiki.hypr.land/Configuring/Monitors/
--- Shared defaults — do not edit. Add user-specific monitor config in custom/monitors.lua.
-
-hl.monitor({ output = "", mode = "preferred", position = "auto", scale = "auto" })

.config/hypr/hyprland/permissions.lua

@@ -1,9 +0,0 @@
--- https://wiki.hypr.land/Configuring/Permissions/
--- Shared defaults — do not edit. No custom/permissions.lua override exists; add one if needed.
--- Permission changes require a Hyprland restart, not a reload.
-
--- hl.config({ ecosystem = { enforce_permissions = 1 } })
-
--- hl.permission({ path = "/usr/(bin|local/bin)/grim", capability = "screencopy", action = "allow" })
--- hl.permission({ path = "/usr/(lib|libexec|lib64)/xdg-desktop-portal-hyprland", capability = "screencopy", action = "allow" })
--- hl.permission({ path = "/usr/(bin|local/bin)/hyprpm", capability = "plugin", action = "allow" })

.config/hypr/hyprland/windowrules.lua

@@ -1,42 +0,0 @@
--- https://wiki.hypr.land/Configuring/Window-Rules/
--- Shared defaults — do not edit. Add user-specific window rules in custom/windowrules.lua.
-
-hl.window_rule({
-	name = "floating-window",
-	match = { class = "(Imprimer l'image|org.gnome.Calculator|org.gnome.Loupe)" },
-	float = true,
-})
-
-hl.window_rule({
-	name = "kitty-term",
-	match = { class = "kitty" },
-	size = "995 600",
-	float = true,
-	center = true,
-})
-
-hl.window_rule({
-	name = "floating-messages",
-	match = { class = "(signal|org.telegram.desktop)" },
-	size = "425 790",
-	move = "(monitor_w*0.72) (monitor_h*0.15)",
-	float = true,
-	pin = true,
-})
-
-hl.window_rule({
-	name = "filesystems",
-	match = { class = "DevTools|Tous les fichiers|org.gnome.Nautilus" },
-	float = true,
-	center = true,
-	size = "(monitor_w*0.48) (monitor_h*0.5)",
-})
-
-hl.window_rule({
-	name = "pip",
-	match = { class = "zen", title = "Picture-in-Picture" },
-	center = true,
-	size = "1280 720",
-	float = true,
-	pin = true,
-})

.config/kitty/kitty.conf

@@ -1,22 +0,0 @@
-font_family FiraCode Nerd Font
-bold_font        auto
-italic_font      auto
-bold_italic_font auto
-font_size 12.0
-
-window_padding_width 4
-
-enable_audio_bell = no
-remember_window_size no
-cursor_trail 10
-
-tab_bar_min_tabs  1
-tab_bar_edge  bottom
-tab_bar_style powerline
-tab_powerline_style slanted
-
-# OS Window titlebar colors
-# wayland_titlebar_color system
-# macos_titlebar_color system
-
-include themes/noctalia.conf

.config/lf/colors

@@ -1,174 +0,0 @@
-# vim:ft=dircolors
-# (This is not a dircolors file but it helps to highlight colors and comments)
-
-# default values from dircolors
-# (entries with a leading # are not implemented in lf)
-# #no     00              # NORMAL
-# fi      00              # FILE
-# #rs     0               # RESET
-# di      01;34           # DIR
-# ln      01;36           # LINK
-# #mh     00              # MULTIHARDLINK
-# pi      40;33           # FIFO
-# so      01;35           # SOCK
-# #do     01;35           # DOOR
-# bd      40;33;01        # BLK
-# cd      40;33;01        # CHR
-# or      40;31;01        # ORPHAN
-# #mi     00              # MISSING
-# su      37;41           # SETUID
-# sg      30;43           # SETGID
-# #ca     30;41           # CAPABILITY
-# tw      30;42           # STICKY_OTHER_WRITABLE
-# ow      34;42           # OTHER_WRITABLE
-# st      37;44           # STICKY
-# ex      01;32           # EXEC
-
-# default values from lf (with matching order)
-# ln      01;36   # LINK
-# or      31;01   # ORPHAN
-# tw      01;34   # STICKY_OTHER_WRITABLE
-# ow      01;34   # OTHER_WRITABLE
-# st      01;34   # STICKY
-# di      01;34   # DIR
-# pi      33      # FIFO
-# so      01;35   # SOCK
-# bd      33;01   # BLK
-# cd      33;01   # CHR
-# su      01;32   # SETUID
-# sg      01;32   # SETGID
-# ex      01;32   # EXEC
-# fi      00      # FILE
-
-# file types (with matching order)
-ln      01;36   # LINK
-or      31;01   # ORPHAN
-tw      34      # STICKY_OTHER_WRITABLE
-ow      34      # OTHER_WRITABLE
-st      01;34   # STICKY
-di      01;34   # DIR
-pi      33      # FIFO
-so      01;35   # SOCK
-bd      33;01   # BLK
-cd      33;01   # CHR
-su      01;32   # SETUID
-sg      01;32   # SETGID
-ex      01;32   # EXEC
-fi      00      # FILE
-
-# archives or compressed (dircolors defaults)
-*.tar   01;31
-*.tgz   01;31
-*.arc   01;31
-*.arj   01;31
-*.taz   01;31
-*.lha   01;31
-*.lz4   01;31
-*.lzh   01;31
-*.lzma  01;31
-*.tlz   01;31
-*.txz   01;31
-*.tzo   01;31
-*.t7z   01;31
-*.zip   01;31
-*.z     01;31
-*.dz    01;31
-*.gz    01;31
-*.lrz   01;31
-*.lz    01;31
-*.lzo   01;31
-*.xz    01;31
-*.zst   01;31
-*.tzst  01;31
-*.bz2   01;31
-*.bz    01;31
-*.tbz   01;31
-*.tbz2  01;31
-*.tz    01;31
-*.deb   01;31
-*.rpm   01;31
-*.jar   01;31
-*.war   01;31
-*.ear   01;31
-*.sar   01;31
-*.rar   01;31
-*.alz   01;31
-*.ace   01;31
-*.zoo   01;31
-*.cpio  01;31
-*.7z    01;31
-*.rz    01;31
-*.cab   01;31
-*.wim   01;31
-*.swm   01;31
-*.dwm   01;31
-*.esd   01;31
-
-# image formats (dircolors defaults)
-*.jpg   01;35
-*.jpeg  01;35
-*.mjpg  01;35
-*.mjpeg 01;35
-*.gif   01;35
-*.bmp   01;35
-*.pbm   01;35
-*.pgm   01;35
-*.ppm   01;35
-*.tga   01;35
-*.xbm   01;35
-*.xpm   01;35
-*.tif   01;35
-*.tiff  01;35
-*.png   01;35
-*.svg   01;35
-*.svgz  01;35
-*.mng   01;35
-*.pcx   01;35
-*.mov   01;35
-*.mpg   01;35
-*.mpeg  01;35
-*.m2v   01;35
-*.mkv   01;35
-*.webm  01;35
-*.ogm   01;35
-*.mp4   01;35
-*.m4v   01;35
-*.mp4v  01;35
-*.vob   01;35
-*.qt    01;35
-*.nuv   01;35
-*.wmv   01;35
-*.asf   01;35
-*.rm    01;35
-*.rmvb  01;35
-*.flc   01;35
-*.avi   01;35
-*.fli   01;35
-*.flv   01;35
-*.gl    01;35
-*.dl    01;35
-*.xcf   01;35
-*.xwd   01;35
-*.yuv   01;35
-*.cgm   01;35
-*.emf   01;35
-*.ogv   01;35
-*.ogx   01;35
-
-# audio formats (dircolors defaults)
-*.aac   00;36
-*.au    00;36
-*.flac  00;36
-*.m4a   00;36
-*.mid   00;36
-*.midi  00;36
-*.mka   00;36
-*.mp3   00;36
-*.mpc   00;36
-*.ogg   00;36
-*.ra    00;36
-*.wav   00;36
-*.oga   00;36
-*.opus  00;36
-*.spx   00;36
-*.xspf  00;36

.config/lf/icons

@@ -1,377 +0,0 @@
-# vim:ft=conf
-
-# These examples require Nerd Fonts or a compatible font to be used.
-# See https://www.nerdfonts.com for more information.
-
-# default values from lf (with matching order)
-# ln      l       # LINK
-# or      l       # ORPHAN
-# tw      t       # STICKY_OTHER_WRITABLE
-# ow      d       # OTHER_WRITABLE
-# st      t       # STICKY
-# di      d       # DIR
-# pi      p       # FIFO
-# so      s       # SOCK
-# bd      b       # BLK
-# cd      c       # CHR
-# su      u       # SETUID
-# sg      g       # SETGID
-# ex      x       # EXEC
-# fi      -       # FILE
-
-# file types (with matching order)
-ln             # LINK
-or             # ORPHAN
-tw      t       # STICKY_OTHER_WRITABLE
-ow             # OTHER_WRITABLE
-st      t       # STICKY
-di             # DIR
-pi      p       # FIFO
-so      s       # SOCK
-bd      b       # BLK
-cd      c       # CHR
-su      u       # SETUID
-sg      g       # SETGID
-ex             # EXEC
-fi             # FILE
-
-# disable some default filetype icons, let them choose icon by filename
-# ln             # LINK
-# or             # ORPHAN
-# tw              # STICKY_OTHER_WRITABLE
-# ow              # OTHER_WRITABLE
-# st              # STICKY
-# di             # DIR
-# pi              # FIFO
-# so              # SOCK
-# bd              # BLK
-# cd              # CHR
-# su              # SETUID
-# sg              # SETGID
-# ex              # EXEC
-# fi             # FILE
-
-# file extensions (vim-devicons)
-*.styl          
-*.sass          
-*.scss          
-*.htm           
-*.html          
-*.slim          
-*.haml          
-*.ejs           
-*.css           
-*.less          
-*.md            
-*.mdx           
-*.markdown      
-*.rmd           
-*.json          
-*.webmanifest   
-*.js            
-*.mjs           
-*.jsx           
-*.rb            
-*.gemspec       
-*.rake          
-*.php           
-*.py            
-*.pyc           
-*.pyo           
-*.pyd           
-*.coffee        
-*.mustache      
-*.hbs           
-*.conf          
-*.ini           
-*.yml           
-*.yaml          
-*.toml          
-*.bat           
-*.mk            
-*.jpg           
-*.jpeg          
-*.bmp           
-*.png           
-*.webp          
-*.gif           
-*.ico           
-*.twig          
-*.cpp           
-*.c++           
-*.cxx           
-*.cc            
-*.cp            
-*.c             
-*.cs            󰌛
-*.h             
-*.hh            
-*.hpp           
-*.hxx           
-*.hs            
-*.lhs           
-*.nix           
-*.lua           
-*.java          
-*.sh            
-*.fish          
-*.bash          
-*.zsh           
-*.ksh           
-*.csh           
-*.awk           
-*.ps1           
-*.ml            λ
-*.mli           λ
-*.diff          
-*.db            
-*.sql           
-*.dump          
-*.clj           
-*.cljc          
-*.cljs          
-*.edn           
-*.scala         
-*.go            
-*.dart          
-*.xul           
-*.sln           
-*.suo           
-*.pl            
-*.pm            
-*.t             
-*.rss           
-'*.f#'          
-*.fsscript      
-*.fsx           
-*.fs            
-*.fsi           
-*.rs            
-*.rlib          
-*.d             
-*.erl           
-*.hrl           
-*.ex            
-*.exs           
-*.eex           
-*.leex          
-*.heex          
-*.vim           
-*.ai            
-*.psd           
-*.psb           
-*.ts            
-*.tsx           
-*.jl            
-*.pp            
-*.vue           
-*.elm           
-*.swift         
-*.xcplayground  
-*.tex           󰙩
-*.r             󰟔
-*.rproj         󰗆
-*.sol           󰡪
-*.pem           
-
-# file names (vim-devicons) (case-insensitive not supported in lf)
-*gruntfile.coffee       
-*gruntfile.js           
-*gruntfile.ls           
-*gulpfile.coffee        
-*gulpfile.js            
-*gulpfile.ls            
-*mix.lock               
-*dropbox                
-*.ds_store              
-*.gitconfig             
-*.gitignore             
-*.gitattributes         
-*.gitlab-ci.yml         
-*.bashrc                
-*.zshrc                 
-*.zshenv                
-*.zprofile              
-*.vimrc                 
-*.gvimrc                
-*_vimrc                 
-*_gvimrc                
-*.bashprofile           
-*favicon.ico            
-*license                
-*node_modules           
-*react.jsx              
-*procfile               
-*dockerfile             
-*docker-compose.yml     
-*docker-compose.yaml    
-*compose.yml            
-*compose.yaml           
-*rakefile               
-*config.ru              
-*gemfile                
-*makefile               
-*cmakelists.txt         
-*robots.txt             󰚩
-
-# file names (case-sensitive adaptations)
-*Gruntfile.coffee       
-*Gruntfile.js           
-*Gruntfile.ls           
-*Gulpfile.coffee        
-*Gulpfile.js            
-*Gulpfile.ls            
-*Dropbox                
-*.DS_Store              
-*LICENSE                
-*React.jsx              
-*Procfile               
-*Dockerfile             
-*Docker-compose.yml     
-*Docker-compose.yaml    
-*Rakefile               
-*Gemfile                
-*Makefile               
-*CMakeLists.txt         
-
-# file patterns (vim-devicons) (patterns not supported in lf)
-# .*jquery.*\.js$         
-# .*angular.*\.js$        
-# .*backbone.*\.js$       
-# .*require.*\.js$        
-# .*materialize.*\.js$    
-# .*materialize.*\.css$   
-# .*mootools.*\.js$       
-# .*vimrc.*               
-# Vagrantfile$            
-
-# file patterns (file name adaptations)
-*jquery.min.js          
-*angular.min.js         
-*backbone.min.js        
-*require.min.js         
-*materialize.min.js     
-*materialize.min.css    
-*mootools.min.js        
-*vimrc                  
-Vagrantfile             
-
-# archives or compressed (extensions from dircolors defaults)
-*.tar   
-*.tgz   
-*.arc   
-*.arj   
-*.taz   
-*.lha   
-*.lz4   
-*.lzh   
-*.lzma  
-*.tlz   
-*.txz   
-*.tzo   
-*.t7z   
-*.zip   
-*.z     
-*.dz    
-*.gz    
-*.lrz   
-*.lz    
-*.lzo   
-*.xz    
-*.zst   
-*.tzst  
-*.bz2   
-*.bz    
-*.tbz   
-*.tbz2  
-*.tz    
-*.deb   
-*.rpm   
-*.jar   
-*.war   
-*.ear   
-*.sar   
-*.rar   
-*.alz   
-*.ace   
-*.zoo   
-*.cpio  
-*.7z    
-*.rz    
-*.cab   
-*.wim   
-*.swm   
-*.dwm   
-*.esd   
-
-# image formats (extensions from dircolors defaults)
-*.jpg   
-*.jpeg  
-*.mjpg  
-*.mjpeg 
-*.gif   
-*.bmp   
-*.pbm   
-*.pgm   
-*.ppm   
-*.tga   
-*.xbm   
-*.xpm   
-*.tif   
-*.tiff  
-*.png   
-*.svg   
-*.svgz  
-*.mng   
-*.pcx   
-*.mov   
-*.mpg   
-*.mpeg  
-*.m2v   
-*.mkv   
-*.webm  
-*.ogm   
-*.mp4   
-*.m4v   
-*.mp4v  
-*.vob   
-*.qt    
-*.nuv   
-*.wmv   
-*.asf   
-*.rm    
-*.rmvb  
-*.flc   
-*.avi   
-*.fli   
-*.flv   
-*.gl    
-*.dl    
-*.xcf   
-*.xwd   
-*.yuv   
-*.cgm   
-*.emf   
-*.ogv   
-*.ogx   
-
-# audio formats (extensions from dircolors defaults)
-*.aac   
-*.au    
-*.flac  
-*.m4a   
-*.mid   
-*.midi  
-*.mka   
-*.mp3   
-*.mpc   
-*.ogg   
-*.ra    
-*.wav   
-*.oga   
-*.opus  
-*.spx   
-*.xspf  
-
-# other formats
-*.pdf   

.config/lf/lfrc

@@ -1,6 +0,0 @@
-set icons true
-set previewer ~/.config/lf/scripts/lfpreview
-cmd on-select &{{
-  exec lf -remote 'redraw'
-}}
-

.config/lf/scripts/lfpreview

@@ -1,26 +0,0 @@
-#!/bin/sh
-draw() {
-  kitten icat --stdin no --transfer-mode memory \
-    --place "${w}x${h}@${x}x${y}" "$1" </dev/null >/dev/tty
-}
-
-file="$1"
-w="$2"
-h="$3"
-x="$4"
-y="$5"
-
-case "$(file -Lb --mime-type "$file")" in
-image/*)
-  draw "$file"
-  ;;
-application/pdf)
-  pdftoppm -f 1 -singlefile "$file" "/tmp/lfoutput"
-  draw "/tmp/lfoutput.ppm"
-  ;;
-*)
-  bat --color=always "$1"
-  ;;
-esac
-
-exit 1 # do not cache

.config/nvim/init.lua

@@ -1,3 +0,0 @@
--- bootstrap lazy.nvim, LazyVim and your plugins
-require("config.lazy")
-

.config/obs-studio/themes/Catppuccin_Frappe.ovt

@@ -1,324 +0,0 @@
-@OBSThemeMeta {
-    name: 'Frappe';
-    id: 'com.obsproject.Catppuccin.Frappe';
-    extends: 'com.obsproject.Catppuccin';
-    author: 'Xurdejl';
-    dark: 'true';
-}
-
-@OBSThemeVars {
-    --ctp_rosewater: #f2d5cf;
-    --ctp_flamingo: #eebebe;
-    --ctp_pink: #f4b8e4;
-    --ctp_mauve: #ca9ee6;
-    --ctp_red: #e78284;
-    --ctp_maroon: #ea999c;
-    --ctp_peach: #ef9f76;
-    --ctp_yellow: #e5c890;
-    --ctp_green: #a6d189;
-    --ctp_teal: #81c8be;
-    --ctp_sky: #99d1db;
-    --ctp_sapphire: #85c1dc;
-    --ctp_blue: #8caaee;
-    --ctp_lavender: #babbf1;
-    --ctp_text: #c6d0f5;
-    --ctp_subtext1: #b5bfe2;
-    --ctp_subtext0: #a5adce;
-    --ctp_overlay2: #949cbb;
-    --ctp_overlay1: #838ba7;
-    --ctp_overlay0: #737994;
-    --ctp_surface2: #626880;
-    --ctp_surface1: #51576d;
-    --ctp_surface0: #414559;
-    --ctp_base: #303446;
-    --ctp_mantle: #292c3c;
-    --ctp_crust: #232634;
-    --ctp_selection_background: #44495d;
-}
-
-VolumeMeter {
-    qproperty-foregroundNominalColor: #7cbc52;
-    qproperty-foregroundWarningColor: #e76f33;
-    qproperty-foregroundErrorColor: #db4346;
-}
-
-/* Context Menu */
-QMenu::right-arrow {
-    image: url(theme:Dark/expand.svg);
-}
-
-/* Dock Widget */
-QDockWidget {
-    titlebar-close-icon: url(theme:Dark/close.svg);
-    titlebar-normal-icon: url(theme:Dark/popout.svg);
-}
-
-/* Source Context Bar */
-QPushButton#sourcePropertiesButton {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-QPushButton#sourceFiltersButton {
-    qproperty-icon: url(theme:Dark/filter.svg);
-}
-
-/* Scenes and Sources toolbar */
-* [themeID="addIconSmall"] {
-    qproperty-icon: url(theme:Dark/plus.svg);
-}
-
-* [themeID="removeIconSmall"] {
-    qproperty-icon: url(theme:Dark/trash.svg);
-}
-
-* [themeID="clearIconSmall"] {
-    qproperty-icon: url(theme:Dark/entry-clear.svg);
-}
-
-* [themeID="propertiesIconSmall"] {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-* [themeID="configIconSmall"] {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-* [themeID="menuIconSmall"] {
-    qproperty-icon: url(theme:Dark/dots-vert.svg);
-}
-
-* [themeID="refreshIconSmall"] {
-    qproperty-icon: url(theme:Dark/refresh.svg);
-}
-
-* [themeID="cogsIcon"] {
-    qproperty-icon: url(theme:Dark/cogs.svg);
-}
-
-#sourceInteractButton {
-    qproperty-icon: url(theme:Dark/interact.svg);
-}
-
-* [themeID="upArrowIconSmall"] {
-    qproperty-icon: url(theme:Dark/up.svg);
-}
-
-* [themeID="downArrowIconSmall"] {
-    qproperty-icon: url(theme:Dark/down.svg);
-}
-
-* [themeID="pauseIconSmall"] {
-    qproperty-icon: url(theme:Dark/media-pause.svg);
-}
-
-* [themeID="filtersIcon"] {
-    qproperty-icon: url(theme:Dark/filter.svg);
-}
-
-QToolBarExtension {
-    qproperty-icon: url(theme:Dark/dots-vert.svg);
-}
-
-/* ComboBox */
-QComboBox::down-arrow,
-QDateTimeEdit::down-arrow {
-    image: url(theme:Dark/collapse.svg);
-}
-
-QComboBox::down-arrow:editable,
-QDateTimeEdit::down-arrow:editable {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Spinbox and doubleSpinbox */
-QSpinBox::up-arrow,
-QDoubleSpinBox::up-arrow {
-    image: url(theme:Dark/up.svg);
-}
-
-QSpinBox::down-arrow,
-QDoubleSpinBox::down-arrow {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Buttons */
-QPushButton::menu-indicator {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Settings Icons */
-OBSBasicSettings {
-    qproperty-generalIcon: url(theme:Dark/settings/general.svg);
-    qproperty-appearanceIcon: url(theme:Dark/settings/appearance.svg);
-    qproperty-streamIcon: url(theme:Dark/settings/stream.svg);
-    qproperty-outputIcon: url(theme:Dark/settings/output.svg);
-    qproperty-audioIcon: url(theme:Dark/settings/audio.svg);
-    qproperty-videoIcon: url(theme:Dark/settings/video.svg);
-    qproperty-hotkeysIcon: url(theme:Dark/settings/hotkeys.svg);
-    qproperty-accessibilityIcon: url(theme:Dark/settings/accessibility.svg);
-    qproperty-advancedIcon: url(theme:Dark/settings/advanced.svg);
-}
-
-/* Checkboxes */
-QCheckBox::indicator:unchecked,
-QGroupBox::indicator:unchecked {
-    image: url(theme:Yami/checkbox_unchecked.svg);
-}
-
-QCheckBox::indicator:unchecked:hover,
-QGroupBox::indicator:unchecked:hover {
-    border: none;
-    image: url(theme:Yami/checkbox_unchecked_focus.svg);
-}
-
-QCheckBox::indicator:checked,
-QGroupBox::indicator:checked {
-    image: url(theme:Yami/checkbox_checked.svg);
-}
-
-QCheckBox::indicator:checked:hover,
-QGroupBox::indicator:checked:hover {
-    image: url(theme:Yami/checkbox_checked_focus.svg);
-}
-
-QCheckBox::indicator:checked:disabled,
-QGroupBox::indicator:checked:disabled {
-    image: url(theme:Yami/checkbox_checked_disabled.svg);
-}
-
-/* Locked CheckBox */
-QCheckBox[lockCheckBox=true]::indicator:checked,
-QCheckBox[lockCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Dark/locked.svg);
-}
-
-/* Visibility CheckBox */
-QCheckBox[visibilityCheckBox=true]::indicator:checked,
-QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Dark/visible.svg);
-}
-
-* [themeID="revertIcon"] {
-    qproperty-icon: url(theme:Dark/revert.svg);
-}
-
-/* Mute CheckBox */
-MuteCheckBox::indicator:checked {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:indeterminate {
-    image: url(theme:Dark/unassigned.svg);
-}
-
-MuteCheckBox::indicator:unchecked {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:hover {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:focus {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:checked:hover {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:focus {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:disabled {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:unchecked:disabled {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-/* Sources List Group Collapse Checkbox */
-QCheckBox[sourceTreeSubItem=true]::indicator:checked,
-QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
-    image: url(theme:Dark/expand.svg);
-}
-
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
-    image: url(theme:Dark/collapse.svg);
-}
-
-/* Source Icons */
-OBSBasic {
-    qproperty-imageIcon: url(theme:Dark/sources/image.svg);
-    qproperty-colorIcon: url(theme:Dark/sources/brush.svg);
-    qproperty-slideshowIcon: url(theme:Dark/sources/slideshow.svg);
-    qproperty-audioInputIcon: url(theme:Dark/sources/microphone.svg);
-    qproperty-audioOutputIcon: url(theme:Dark/settings/audio.svg);
-    qproperty-desktopCapIcon: url(theme:Dark/settings/video.svg);
-    qproperty-windowCapIcon: url(theme:Dark/sources/window.svg);
-    qproperty-gameCapIcon: url(theme:Dark/sources/gamepad.svg);
-    qproperty-cameraIcon: url(theme:Dark/sources/camera.svg);
-    qproperty-textIcon: url(theme:Dark/sources/text.svg);
-    qproperty-mediaIcon: url(theme:Dark/sources/media.svg);
-    qproperty-browserIcon: url(theme:Dark/sources/globe.svg);
-    qproperty-groupIcon: url(theme:Dark/sources/group.svg);
-    qproperty-sceneIcon: url(theme:Dark/sources/scene.svg);
-    qproperty-defaultIcon: url(theme:Dark/sources/default.svg);
-    qproperty-audioProcessOutputIcon: url(theme:Dark/sources/windowaudio.svg);
-}
-
-/* Save icon */
-* [themeID="replayIconSmall"] {
-    qproperty-icon: url(theme:Dark/save.svg);
-}
-
-/* Media icons */
-* [themeID="playIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_play.svg);
-}
-
-* [themeID="pauseIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_pause.svg);
-}
-
-* [themeID="restartIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_restart.svg);
-}
-
-* [themeID="stopIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_stop.svg);
-}
-
-* [themeID="nextIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_next.svg);
-}
-
-* [themeID="previousIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_previous.svg);
-}
-
-/* YouTube Integration */
-OBSYoutubeActions {
-    qproperty-thumbPlaceholder: url(theme:Dark/sources/image.svg);
-}
-
-/* Calendar Widget */
-QDateTimeEdit::down-arrow {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Calendar Top Bar Buttons */
-#qt_calendar_monthbutton::menu-indicator {
-    image: url(theme:Dark/down.svg);
-}
-
-QCalendarWidget #qt_calendar_prevmonth {
-    qproperty-icon: url(theme:Dark/left.svg);
-}
-
-QCalendarWidget #qt_calendar_nextmonth {
-    qproperty-icon: url(theme:Dark/right.svg);
-}

.config/obs-studio/themes/Catppuccin_Latte.ovt

@@ -1,324 +0,0 @@
-@OBSThemeMeta {
-    name: 'Latte';
-    id: 'com.obsproject.Catppuccin.Latte';
-    extends: 'com.obsproject.Catppuccin';
-    author: 'Xurdejl';
-    dark: 'false';
-}
-
-@OBSThemeVars {
-    --ctp_rosewater: #dc8a78;
-    --ctp_flamingo: #dd7878;
-    --ctp_pink: #ea76cb;
-    --ctp_mauve: #8839ef;
-    --ctp_red: #d20f39;
-    --ctp_maroon: #e64553;
-    --ctp_peach: #fe640b;
-    --ctp_yellow: #df8e1d;
-    --ctp_green: #40a02b;
-    --ctp_teal: #179299;
-    --ctp_sky: #04a5e5;
-    --ctp_sapphire: #209fb5;
-    --ctp_blue: #1e66f5;
-    --ctp_lavender: #7287fd;
-    --ctp_text: #4c4f69;
-    --ctp_subtext1: #5c5f77;
-    --ctp_subtext0: #6c6f85;
-    --ctp_overlay2: #7c7f93;
-    --ctp_overlay1: #8c8fa1;
-    --ctp_overlay0: #9ca0b0;
-    --ctp_surface2: #acb0be;
-    --ctp_surface1: #bcc0cc;
-    --ctp_surface0: #ccd0da;
-    --ctp_base: #eff1f5;
-    --ctp_mantle: #e6e9ef;
-    --ctp_crust: #dce0e8;
-    --ctp_selection_background: #d4d7df;
-}
-
-VolumeMeter {
-    qproperty-foregroundNominalColor: #62ce4a;
-    qproperty-foregroundWarningColor: #fe9558;
-    qproperty-foregroundErrorColor: #f13d64;
-}
-
-/* Context Menu */
-QMenu::right-arrow {
-    image: url(theme:Light/expand.svg);
-}
-
-/* Dock Widget */
-QDockWidget {
-    titlebar-close-icon: url(theme:Light/close.svg);
-    titlebar-normal-icon: url(theme:Light/popout.svg);
-}
-
-/* Source Context Bar */
-QPushButton#sourcePropertiesButton {
-    qproperty-icon: url(theme:Light/settings/general.svg);
-}
-
-QPushButton#sourceFiltersButton {
-    qproperty-icon: url(theme:Light/filter.svg);
-}
-
-/* Scenes and Sources toolbar */
-* [themeID="addIconSmall"] {
-    qproperty-icon: url(theme:Light/plus.svg);
-}
-
-* [themeID="removeIconSmall"] {
-    qproperty-icon: url(theme:Light/trash.svg);
-}
-
-* [themeID="clearIconSmall"] {
-    qproperty-icon: url(theme:Light/entry-clear.svg);
-}
-
-* [themeID="propertiesIconSmall"] {
-    qproperty-icon: url(theme:Light/settings/general.svg);
-}
-
-* [themeID="configIconSmall"] {
-    qproperty-icon: url(theme:Light/settings/general.svg);
-}
-
-* [themeID="menuIconSmall"] {
-    qproperty-icon: url(theme:Light/dots-vert.svg);
-}
-
-* [themeID="refreshIconSmall"] {
-    qproperty-icon: url(theme:Light/refresh.svg);
-}
-
-* [themeID="cogsIcon"] {
-    qproperty-icon: url(theme:Light/cogs.svg);
-}
-
-#sourceInteractButton {
-    qproperty-icon: url(theme:Light/interact.svg);
-}
-
-* [themeID="upArrowIconSmall"] {
-    qproperty-icon: url(theme:Light/up.svg);
-}
-
-* [themeID="downArrowIconSmall"] {
-    qproperty-icon: url(theme:Light/down.svg);
-}
-
-* [themeID="pauseIconSmall"] {
-    qproperty-icon: url(theme:Light/media-pause.svg);
-}
-
-* [themeID="filtersIcon"] {
-    qproperty-icon: url(theme:Light/filter.svg);
-}
-
-QToolBarExtension {
-    qproperty-icon: url(theme:Light/dots-vert.svg);
-}
-
-/* ComboBox */
-QComboBox::down-arrow,
-QDateTimeEdit::down-arrow {
-    image: url(theme:Light/collapse.svg);
-}
-
-QComboBox::down-arrow:editable,
-QDateTimeEdit::down-arrow:editable {
-    image: url(theme:Light/down.svg);
-}
-
-/* Spinbox and doubleSpinbox */
-QSpinBox::up-arrow,
-QDoubleSpinBox::up-arrow {
-    image: url(theme:Light/up.svg);
-}
-
-QSpinBox::down-arrow,
-QDoubleSpinBox::down-arrow {
-    image: url(theme:Light/down.svg);
-}
-
-/* Buttons */
-QPushButton::menu-indicator {
-    image: url(theme:Light/down.svg);
-}
-
-/* Settings Icons */
-OBSBasicSettings {
-    qproperty-generalIcon: url(theme:Light/settings/general.svg);
-    qproperty-appearanceIcon: url(theme:Light/settings/appearance.svg);
-    qproperty-streamIcon: url(theme:Light/settings/stream.svg);
-    qproperty-outputIcon: url(theme:Light/settings/output.svg);
-    qproperty-audioIcon: url(theme:Light/settings/audio.svg);
-    qproperty-videoIcon: url(theme:Light/settings/video.svg);
-    qproperty-hotkeysIcon: url(theme:Light/settings/hotkeys.svg);
-    qproperty-accessibilityIcon: url(theme:Light/settings/accessibility.svg);
-    qproperty-advancedIcon: url(theme:Light/settings/advanced.svg);
-}
-
-/* Checkboxes */
-QCheckBox::indicator:unchecked,
-QGroupBox::indicator:unchecked {
-    image: url(theme:Light/checkbox_unchecked.svg);
-}
-
-QCheckBox::indicator:unchecked:hover,
-QGroupBox::indicator:unchecked:hover {
-    border: none;
-    image: url(theme:Light/checkbox_unchecked_focus.svg);
-}
-
-QCheckBox::indicator:checked,
-QGroupBox::indicator:checked {
-    image: url(theme:Light/checkbox_checked.svg);
-}
-
-QCheckBox::indicator:checked:hover,
-QGroupBox::indicator:checked:hover {
-    image: url(theme:Light/checkbox_checked_focus.svg);
-}
-
-QCheckBox::indicator:checked:disabled,
-QGroupBox::indicator:checked:disabled {
-    image: url(theme:Light/checkbox_checked_disabled.svg);
-}
-
-/* Locked CheckBox */
-QCheckBox[lockCheckBox=true]::indicator:checked,
-QCheckBox[lockCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Light/locked.svg);
-}
-
-/* Visibility CheckBox */
-QCheckBox[visibilityCheckBox=true]::indicator:checked,
-QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Light/visible.svg);
-}
-
-* [themeID="revertIcon"] {
-    qproperty-icon: url(theme:Light/revert.svg);
-}
-
-/* Mute CheckBox */
-MuteCheckBox::indicator:checked {
-    image: url(theme:Light/mute.svg);
-}
-
-MuteCheckBox::indicator:indeterminate {
-    image: url(theme:Light/unassigned.svg);
-}
-
-MuteCheckBox::indicator:unchecked {
-    image: url(theme:Light/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:hover {
-    image: url(theme:Light/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:focus {
-    image: url(theme:Light/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:checked:hover {
-    image: url(theme:Light/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:focus {
-    image: url(theme:Light/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:disabled {
-    image: url(theme:Light/mute.svg);
-}
-
-MuteCheckBox::indicator:unchecked:disabled {
-    image: url(theme:Light/settings/audio.svg);
-}
-
-/* Sources List Group Collapse Checkbox */
-QCheckBox[sourceTreeSubItem=true]::indicator:checked,
-QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
-    image: url(theme:Light/expand.svg);
-}
-
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
-    image: url(theme:Light/collapse.svg);
-}
-
-/* Source Icons */
-OBSBasic {
-    qproperty-imageIcon: url(theme:Light/sources/image.svg);
-    qproperty-colorIcon: url(theme:Light/sources/brush.svg);
-    qproperty-slideshowIcon: url(theme:Light/sources/slideshow.svg);
-    qproperty-audioInputIcon: url(theme:Light/sources/microphone.svg);
-    qproperty-audioOutputIcon: url(theme:Light/settings/audio.svg);
-    qproperty-desktopCapIcon: url(theme:Light/settings/video.svg);
-    qproperty-windowCapIcon: url(theme:Light/sources/window.svg);
-    qproperty-gameCapIcon: url(theme:Light/sources/gamepad.svg);
-    qproperty-cameraIcon: url(theme:Light/sources/camera.svg);
-    qproperty-textIcon: url(theme:Light/sources/text.svg);
-    qproperty-mediaIcon: url(theme:Light/sources/media.svg);
-    qproperty-browserIcon: url(theme:Light/sources/globe.svg);
-    qproperty-groupIcon: url(theme:Light/sources/group.svg);
-    qproperty-sceneIcon: url(theme:Light/sources/scene.svg);
-    qproperty-defaultIcon: url(theme:Light/sources/default.svg);
-    qproperty-audioProcessOutputIcon: url(theme:Light/sources/windowaudio.svg);
-}
-
-/* Save icon */
-* [themeID="replayIconSmall"] {
-    qproperty-icon: url(theme:Light/save.svg);
-}
-
-/* Media icons */
-* [themeID="playIcon"] {
-    qproperty-icon: url(theme:Light/media/media_play.svg);
-}
-
-* [themeID="pauseIcon"] {
-    qproperty-icon: url(theme:Light/media/media_pause.svg);
-}
-
-* [themeID="restartIcon"] {
-    qproperty-icon: url(theme:Light/media/media_restart.svg);
-}
-
-* [themeID="stopIcon"] {
-    qproperty-icon: url(theme:Light/media/media_stop.svg);
-}
-
-* [themeID="nextIcon"] {
-    qproperty-icon: url(theme:Light/media/media_next.svg);
-}
-
-* [themeID="previousIcon"] {
-    qproperty-icon: url(theme:Light/media/media_previous.svg);
-}
-
-/* YouTube Integration */
-OBSYoutubeActions {
-    qproperty-thumbPlaceholder: url(theme:Light/sources/image.svg);
-}
-
-/* Calendar Widget */
-QDateTimeEdit::down-arrow {
-    image: url(theme:Light/down.svg);
-}
-
-/* Calendar Top Bar Buttons */
-#qt_calendar_monthbutton::menu-indicator {
-    image: url(theme:Light/down.svg);
-}
-
-QCalendarWidget #qt_calendar_prevmonth {
-    qproperty-icon: url(theme:Light/left.svg);
-}
-
-QCalendarWidget #qt_calendar_nextmonth {
-    qproperty-icon: url(theme:Light/right.svg);
-}

.config/obs-studio/themes/Catppuccin_Macchiato.ovt

@@ -1,324 +0,0 @@
-@OBSThemeMeta {
-    name: 'Macchiato';
-    id: 'com.obsproject.Catppuccin.Macchiato';
-    extends: 'com.obsproject.Catppuccin';
-    author: 'Xurdejl';
-    dark: 'true';
-}
-
-@OBSThemeVars {
-    --ctp_rosewater: #f4dbd6;
-    --ctp_flamingo: #f0c6c6;
-    --ctp_pink: #f5bde6;
-    --ctp_mauve: #c6a0f6;
-    --ctp_red: #ed8796;
-    --ctp_maroon: #ee99a0;
-    --ctp_peach: #f5a97f;
-    --ctp_yellow: #eed49f;
-    --ctp_green: #a6da95;
-    --ctp_teal: #8bd5ca;
-    --ctp_sky: #91d7e3;
-    --ctp_sapphire: #7dc4e4;
-    --ctp_blue: #8aadf4;
-    --ctp_lavender: #b7bdf8;
-    --ctp_text: #cad3f5;
-    --ctp_subtext1: #b8c0e0;
-    --ctp_subtext0: #a5adcb;
-    --ctp_overlay2: #939ab7;
-    --ctp_overlay1: #8087a2;
-    --ctp_overlay0: #6e738d;
-    --ctp_surface2: #5b6078;
-    --ctp_surface1: #494d64;
-    --ctp_surface0: #363a4f;
-    --ctp_base: #24273a;
-    --ctp_mantle: #1e2030;
-    --ctp_crust: #181926;
-    --ctp_selection_background: #3a3d53;
-}
-
-VolumeMeter {
-    qproperty-foregroundNominalColor: #78c75d;
-    qproperty-foregroundWarningColor: #ef7939;
-    qproperty-foregroundErrorColor: #e3455d;
-}
-
-/* Context Menu */
-QMenu::right-arrow {
-    image: url(theme:Dark/expand.svg);
-}
-
-/* Dock Widget */
-QDockWidget {
-    titlebar-close-icon: url(theme:Dark/close.svg);
-    titlebar-normal-icon: url(theme:Dark/popout.svg);
-}
-
-/* Source Context Bar */
-QPushButton#sourcePropertiesButton {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-QPushButton#sourceFiltersButton {
-    qproperty-icon: url(theme:Dark/filter.svg);
-}
-
-/* Scenes and Sources toolbar */
-* [themeID="addIconSmall"] {
-    qproperty-icon: url(theme:Dark/plus.svg);
-}
-
-* [themeID="removeIconSmall"] {
-    qproperty-icon: url(theme:Dark/trash.svg);
-}
-
-* [themeID="clearIconSmall"] {
-    qproperty-icon: url(theme:Dark/entry-clear.svg);
-}
-
-* [themeID="propertiesIconSmall"] {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-* [themeID="configIconSmall"] {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-* [themeID="menuIconSmall"] {
-    qproperty-icon: url(theme:Dark/dots-vert.svg);
-}
-
-* [themeID="refreshIconSmall"] {
-    qproperty-icon: url(theme:Dark/refresh.svg);
-}
-
-* [themeID="cogsIcon"] {
-    qproperty-icon: url(theme:Dark/cogs.svg);
-}
-
-#sourceInteractButton {
-    qproperty-icon: url(theme:Dark/interact.svg);
-}
-
-* [themeID="upArrowIconSmall"] {
-    qproperty-icon: url(theme:Dark/up.svg);
-}
-
-* [themeID="downArrowIconSmall"] {
-    qproperty-icon: url(theme:Dark/down.svg);
-}
-
-* [themeID="pauseIconSmall"] {
-    qproperty-icon: url(theme:Dark/media-pause.svg);
-}
-
-* [themeID="filtersIcon"] {
-    qproperty-icon: url(theme:Dark/filter.svg);
-}
-
-QToolBarExtension {
-    qproperty-icon: url(theme:Dark/dots-vert.svg);
-}
-
-/* ComboBox */
-QComboBox::down-arrow,
-QDateTimeEdit::down-arrow {
-    image: url(theme:Dark/collapse.svg);
-}
-
-QComboBox::down-arrow:editable,
-QDateTimeEdit::down-arrow:editable {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Spinbox and doubleSpinbox */
-QSpinBox::up-arrow,
-QDoubleSpinBox::up-arrow {
-    image: url(theme:Dark/up.svg);
-}
-
-QSpinBox::down-arrow,
-QDoubleSpinBox::down-arrow {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Buttons */
-QPushButton::menu-indicator {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Settings Icons */
-OBSBasicSettings {
-    qproperty-generalIcon: url(theme:Dark/settings/general.svg);
-    qproperty-appearanceIcon: url(theme:Dark/settings/appearance.svg);
-    qproperty-streamIcon: url(theme:Dark/settings/stream.svg);
-    qproperty-outputIcon: url(theme:Dark/settings/output.svg);
-    qproperty-audioIcon: url(theme:Dark/settings/audio.svg);
-    qproperty-videoIcon: url(theme:Dark/settings/video.svg);
-    qproperty-hotkeysIcon: url(theme:Dark/settings/hotkeys.svg);
-    qproperty-accessibilityIcon: url(theme:Dark/settings/accessibility.svg);
-    qproperty-advancedIcon: url(theme:Dark/settings/advanced.svg);
-}
-
-/* Checkboxes */
-QCheckBox::indicator:unchecked,
-QGroupBox::indicator:unchecked {
-    image: url(theme:Yami/checkbox_unchecked.svg);
-}
-
-QCheckBox::indicator:unchecked:hover,
-QGroupBox::indicator:unchecked:hover {
-    border: none;
-    image: url(theme:Yami/checkbox_unchecked_focus.svg);
-}
-
-QCheckBox::indicator:checked,
-QGroupBox::indicator:checked {
-    image: url(theme:Yami/checkbox_checked.svg);
-}
-
-QCheckBox::indicator:checked:hover,
-QGroupBox::indicator:checked:hover {
-    image: url(theme:Yami/checkbox_checked_focus.svg);
-}
-
-QCheckBox::indicator:checked:disabled,
-QGroupBox::indicator:checked:disabled {
-    image: url(theme:Yami/checkbox_checked_disabled.svg);
-}
-
-/* Locked CheckBox */
-QCheckBox[lockCheckBox=true]::indicator:checked,
-QCheckBox[lockCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Dark/locked.svg);
-}
-
-/* Visibility CheckBox */
-QCheckBox[visibilityCheckBox=true]::indicator:checked,
-QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Dark/visible.svg);
-}
-
-* [themeID="revertIcon"] {
-    qproperty-icon: url(theme:Dark/revert.svg);
-}
-
-/* Mute CheckBox */
-MuteCheckBox::indicator:checked {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:indeterminate {
-    image: url(theme:Dark/unassigned.svg);
-}
-
-MuteCheckBox::indicator:unchecked {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:hover {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:focus {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:checked:hover {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:focus {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:disabled {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:unchecked:disabled {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-/* Sources List Group Collapse Checkbox */
-QCheckBox[sourceTreeSubItem=true]::indicator:checked,
-QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
-    image: url(theme:Dark/expand.svg);
-}
-
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
-    image: url(theme:Dark/collapse.svg);
-}
-
-/* Source Icons */
-OBSBasic {
-    qproperty-imageIcon: url(theme:Dark/sources/image.svg);
-    qproperty-colorIcon: url(theme:Dark/sources/brush.svg);
-    qproperty-slideshowIcon: url(theme:Dark/sources/slideshow.svg);
-    qproperty-audioInputIcon: url(theme:Dark/sources/microphone.svg);
-    qproperty-audioOutputIcon: url(theme:Dark/settings/audio.svg);
-    qproperty-desktopCapIcon: url(theme:Dark/settings/video.svg);
-    qproperty-windowCapIcon: url(theme:Dark/sources/window.svg);
-    qproperty-gameCapIcon: url(theme:Dark/sources/gamepad.svg);
-    qproperty-cameraIcon: url(theme:Dark/sources/camera.svg);
-    qproperty-textIcon: url(theme:Dark/sources/text.svg);
-    qproperty-mediaIcon: url(theme:Dark/sources/media.svg);
-    qproperty-browserIcon: url(theme:Dark/sources/globe.svg);
-    qproperty-groupIcon: url(theme:Dark/sources/group.svg);
-    qproperty-sceneIcon: url(theme:Dark/sources/scene.svg);
-    qproperty-defaultIcon: url(theme:Dark/sources/default.svg);
-    qproperty-audioProcessOutputIcon: url(theme:Dark/sources/windowaudio.svg);
-}
-
-/* Save icon */
-* [themeID="replayIconSmall"] {
-    qproperty-icon: url(theme:Dark/save.svg);
-}
-
-/* Media icons */
-* [themeID="playIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_play.svg);
-}
-
-* [themeID="pauseIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_pause.svg);
-}
-
-* [themeID="restartIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_restart.svg);
-}
-
-* [themeID="stopIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_stop.svg);
-}
-
-* [themeID="nextIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_next.svg);
-}
-
-* [themeID="previousIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_previous.svg);
-}
-
-/* YouTube Integration */
-OBSYoutubeActions {
-    qproperty-thumbPlaceholder: url(theme:Dark/sources/image.svg);
-}
-
-/* Calendar Widget */
-QDateTimeEdit::down-arrow {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Calendar Top Bar Buttons */
-#qt_calendar_monthbutton::menu-indicator {
-    image: url(theme:Dark/down.svg);
-}
-
-QCalendarWidget #qt_calendar_prevmonth {
-    qproperty-icon: url(theme:Dark/left.svg);
-}
-
-QCalendarWidget #qt_calendar_nextmonth {
-    qproperty-icon: url(theme:Dark/right.svg);
-}

.config/obs-studio/themes/Catppuccin_Mocha.ovt

@@ -1,324 +0,0 @@
-@OBSThemeMeta {
-    name: 'Mocha';
-    id: 'com.obsproject.Catppuccin.Mocha';
-    extends: 'com.obsproject.Catppuccin';
-    author: 'Xurdejl';
-    dark: 'true';
-}
-
-@OBSThemeVars {
-    --ctp_rosewater: #f5e0dc;
-    --ctp_flamingo: #f2cdcd;
-    --ctp_pink: #f5c2e7;
-    --ctp_mauve: #cba6f7;
-    --ctp_red: #f38ba8;
-    --ctp_maroon: #eba0ac;
-    --ctp_peach: #fab387;
-    --ctp_yellow: #f9e2af;
-    --ctp_green: #a6e3a1;
-    --ctp_teal: #94e2d5;
-    --ctp_sky: #89dceb;
-    --ctp_sapphire: #74c7ec;
-    --ctp_blue: #89b4fa;
-    --ctp_lavender: #b4befe;
-    --ctp_text: #cdd6f4;
-    --ctp_subtext1: #bac2de;
-    --ctp_subtext0: #a6adc8;
-    --ctp_overlay2: #9399b2;
-    --ctp_overlay1: #7f849c;
-    --ctp_overlay0: #6c7086;
-    --ctp_surface2: #585b70;
-    --ctp_surface1: #45475a;
-    --ctp_surface0: #313244;
-    --ctp_base: #1e1e2e;
-    --ctp_mantle: #181825;
-    --ctp_crust: #11111b;
-    --ctp_selection_background: #353649;
-}
-
-VolumeMeter {
-    qproperty-foregroundNominalColor: #6fd266;
-    qproperty-foregroundWarningColor: #f7853f;
-    qproperty-foregroundErrorColor: #ec4675;
-}
-
-/* Context Menu */
-QMenu::right-arrow {
-    image: url(theme:Dark/expand.svg);
-}
-
-/* Dock Widget */
-QDockWidget {
-    titlebar-close-icon: url(theme:Dark/close.svg);
-    titlebar-normal-icon: url(theme:Dark/popout.svg);
-}
-
-/* Source Context Bar */
-QPushButton#sourcePropertiesButton {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-QPushButton#sourceFiltersButton {
-    qproperty-icon: url(theme:Dark/filter.svg);
-}
-
-/* Scenes and Sources toolbar */
-* [themeID="addIconSmall"] {
-    qproperty-icon: url(theme:Dark/plus.svg);
-}
-
-* [themeID="removeIconSmall"] {
-    qproperty-icon: url(theme:Dark/trash.svg);
-}
-
-* [themeID="clearIconSmall"] {
-    qproperty-icon: url(theme:Dark/entry-clear.svg);
-}
-
-* [themeID="propertiesIconSmall"] {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-* [themeID="configIconSmall"] {
-    qproperty-icon: url(theme:Dark/settings/general.svg);
-}
-
-* [themeID="menuIconSmall"] {
-    qproperty-icon: url(theme:Dark/dots-vert.svg);
-}
-
-* [themeID="refreshIconSmall"] {
-    qproperty-icon: url(theme:Dark/refresh.svg);
-}
-
-* [themeID="cogsIcon"] {
-    qproperty-icon: url(theme:Dark/cogs.svg);
-}
-
-#sourceInteractButton {
-    qproperty-icon: url(theme:Dark/interact.svg);
-}
-
-* [themeID="upArrowIconSmall"] {
-    qproperty-icon: url(theme:Dark/up.svg);
-}
-
-* [themeID="downArrowIconSmall"] {
-    qproperty-icon: url(theme:Dark/down.svg);
-}
-
-* [themeID="pauseIconSmall"] {
-    qproperty-icon: url(theme:Dark/media-pause.svg);
-}
-
-* [themeID="filtersIcon"] {
-    qproperty-icon: url(theme:Dark/filter.svg);
-}
-
-QToolBarExtension {
-    qproperty-icon: url(theme:Dark/dots-vert.svg);
-}
-
-/* ComboBox */
-QComboBox::down-arrow,
-QDateTimeEdit::down-arrow {
-    image: url(theme:Dark/collapse.svg);
-}
-
-QComboBox::down-arrow:editable,
-QDateTimeEdit::down-arrow:editable {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Spinbox and doubleSpinbox */
-QSpinBox::up-arrow,
-QDoubleSpinBox::up-arrow {
-    image: url(theme:Dark/up.svg);
-}
-
-QSpinBox::down-arrow,
-QDoubleSpinBox::down-arrow {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Buttons */
-QPushButton::menu-indicator {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Settings Icons */
-OBSBasicSettings {
-    qproperty-generalIcon: url(theme:Dark/settings/general.svg);
-    qproperty-appearanceIcon: url(theme:Dark/settings/appearance.svg);
-    qproperty-streamIcon: url(theme:Dark/settings/stream.svg);
-    qproperty-outputIcon: url(theme:Dark/settings/output.svg);
-    qproperty-audioIcon: url(theme:Dark/settings/audio.svg);
-    qproperty-videoIcon: url(theme:Dark/settings/video.svg);
-    qproperty-hotkeysIcon: url(theme:Dark/settings/hotkeys.svg);
-    qproperty-accessibilityIcon: url(theme:Dark/settings/accessibility.svg);
-    qproperty-advancedIcon: url(theme:Dark/settings/advanced.svg);
-}
-
-/* Checkboxes */
-QCheckBox::indicator:unchecked,
-QGroupBox::indicator:unchecked {
-    image: url(theme:Yami/checkbox_unchecked.svg);
-}
-
-QCheckBox::indicator:unchecked:hover,
-QGroupBox::indicator:unchecked:hover {
-    border: none;
-    image: url(theme:Yami/checkbox_unchecked_focus.svg);
-}
-
-QCheckBox::indicator:checked,
-QGroupBox::indicator:checked {
-    image: url(theme:Yami/checkbox_checked.svg);
-}
-
-QCheckBox::indicator:checked:hover,
-QGroupBox::indicator:checked:hover {
-    image: url(theme:Yami/checkbox_checked_focus.svg);
-}
-
-QCheckBox::indicator:checked:disabled,
-QGroupBox::indicator:checked:disabled {
-    image: url(theme:Yami/checkbox_checked_disabled.svg);
-}
-
-/* Locked CheckBox */
-QCheckBox[lockCheckBox=true]::indicator:checked,
-QCheckBox[lockCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Dark/locked.svg);
-}
-
-/* Visibility CheckBox */
-QCheckBox[visibilityCheckBox=true]::indicator:checked,
-QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Dark/visible.svg);
-}
-
-* [themeID="revertIcon"] {
-    qproperty-icon: url(theme:Dark/revert.svg);
-}
-
-/* Mute CheckBox */
-MuteCheckBox::indicator:checked {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:indeterminate {
-    image: url(theme:Dark/unassigned.svg);
-}
-
-MuteCheckBox::indicator:unchecked {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:hover {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:focus {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:checked:hover {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:focus {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:disabled {
-    image: url(theme:Dark/mute.svg);
-}
-
-MuteCheckBox::indicator:unchecked:disabled {
-    image: url(theme:Dark/settings/audio.svg);
-}
-
-/* Sources List Group Collapse Checkbox */
-QCheckBox[sourceTreeSubItem=true]::indicator:checked,
-QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
-    image: url(theme:Dark/expand.svg);
-}
-
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
-    image: url(theme:Dark/collapse.svg);
-}
-
-/* Source Icons */
-OBSBasic {
-    qproperty-imageIcon: url(theme:Dark/sources/image.svg);
-    qproperty-colorIcon: url(theme:Dark/sources/brush.svg);
-    qproperty-slideshowIcon: url(theme:Dark/sources/slideshow.svg);
-    qproperty-audioInputIcon: url(theme:Dark/sources/microphone.svg);
-    qproperty-audioOutputIcon: url(theme:Dark/settings/audio.svg);
-    qproperty-desktopCapIcon: url(theme:Dark/settings/video.svg);
-    qproperty-windowCapIcon: url(theme:Dark/sources/window.svg);
-    qproperty-gameCapIcon: url(theme:Dark/sources/gamepad.svg);
-    qproperty-cameraIcon: url(theme:Dark/sources/camera.svg);
-    qproperty-textIcon: url(theme:Dark/sources/text.svg);
-    qproperty-mediaIcon: url(theme:Dark/sources/media.svg);
-    qproperty-browserIcon: url(theme:Dark/sources/globe.svg);
-    qproperty-groupIcon: url(theme:Dark/sources/group.svg);
-    qproperty-sceneIcon: url(theme:Dark/sources/scene.svg);
-    qproperty-defaultIcon: url(theme:Dark/sources/default.svg);
-    qproperty-audioProcessOutputIcon: url(theme:Dark/sources/windowaudio.svg);
-}
-
-/* Save icon */
-* [themeID="replayIconSmall"] {
-    qproperty-icon: url(theme:Dark/save.svg);
-}
-
-/* Media icons */
-* [themeID="playIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_play.svg);
-}
-
-* [themeID="pauseIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_pause.svg);
-}
-
-* [themeID="restartIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_restart.svg);
-}
-
-* [themeID="stopIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_stop.svg);
-}
-
-* [themeID="nextIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_next.svg);
-}
-
-* [themeID="previousIcon"] {
-    qproperty-icon: url(theme:Dark/media/media_previous.svg);
-}
-
-/* YouTube Integration */
-OBSYoutubeActions {
-    qproperty-thumbPlaceholder: url(theme:Dark/sources/image.svg);
-}
-
-/* Calendar Widget */
-QDateTimeEdit::down-arrow {
-    image: url(theme:Dark/down.svg);
-}
-
-/* Calendar Top Bar Buttons */
-#qt_calendar_monthbutton::menu-indicator {
-    image: url(theme:Dark/down.svg);
-}
-
-QCalendarWidget #qt_calendar_prevmonth {
-    qproperty-icon: url(theme:Dark/left.svg);
-}
-
-QCalendarWidget #qt_calendar_nextmonth {
-    qproperty-icon: url(theme:Dark/right.svg);
-}

.config/obs-studio/themes/Theme.ovt

@@ -1,324 +0,0 @@
-@OBSThemeMeta {
-    name: 'Latte';
-    id: 'com.obsproject.Catppuccin.Latte';
-    extends: 'com.obsproject.Catppuccin';
-    author: 'Xurdejl';
-    dark: 'false';
-}
-
-@OBSThemeVars {
-    --ctp_rosewater: #dc8a78;
-    --ctp_flamingo: #dd7878;
-    --ctp_pink: #ea76cb;
-    --ctp_mauve: #8839ef;
-    --ctp_red: #d20f39;
-    --ctp_maroon: #e64553;
-    --ctp_peach: #fe640b;
-    --ctp_yellow: #df8e1d;
-    --ctp_green: #40a02b;
-    --ctp_teal: #179299;
-    --ctp_sky: #04a5e5;
-    --ctp_sapphire: #209fb5;
-    --ctp_blue: #1e66f5;
-    --ctp_lavender: #7287fd;
-    --ctp_text: #4c4f69;
-    --ctp_subtext1: #5c5f77;
-    --ctp_subtext0: #6c6f85;
-    --ctp_overlay2: #7c7f93;
-    --ctp_overlay1: #8c8fa1;
-    --ctp_overlay0: #9ca0b0;
-    --ctp_surface2: #acb0be;
-    --ctp_surface1: #bcc0cc;
-    --ctp_surface0: #ccd0da;
-    --ctp_base: #eff1f5;
-    --ctp_mantle: #e6e9ef;
-    --ctp_crust: #dce0e8;
-    --ctp_selection_background: #d4d7df;
-}
-
-VolumeMeter {
-    qproperty-foregroundNominalColor: #62ce4a;
-    qproperty-foregroundWarningColor: #fe9558;
-    qproperty-foregroundErrorColor: #f13d64;
-}
-
-/* Context Menu */
-QMenu::right-arrow {
-    image: url(theme:Light/expand.svg);
-}
-
-/* Dock Widget */
-QDockWidget {
-    titlebar-close-icon: url(theme:Light/close.svg);
-    titlebar-normal-icon: url(theme:Light/popout.svg);
-}
-
-/* Source Context Bar */
-QPushButton#sourcePropertiesButton {
-    qproperty-icon: url(theme:Light/settings/general.svg);
-}
-
-QPushButton#sourceFiltersButton {
-    qproperty-icon: url(theme:Light/filter.svg);
-}
-
-/* Scenes and Sources toolbar */
-* [themeID="addIconSmall"] {
-    qproperty-icon: url(theme:Light/plus.svg);
-}
-
-* [themeID="removeIconSmall"] {
-    qproperty-icon: url(theme:Light/trash.svg);
-}
-
-* [themeID="clearIconSmall"] {
-    qproperty-icon: url(theme:Light/entry-clear.svg);
-}
-
-* [themeID="propertiesIconSmall"] {
-    qproperty-icon: url(theme:Light/settings/general.svg);
-}
-
-* [themeID="configIconSmall"] {
-    qproperty-icon: url(theme:Light/settings/general.svg);
-}
-
-* [themeID="menuIconSmall"] {
-    qproperty-icon: url(theme:Light/dots-vert.svg);
-}
-
-* [themeID="refreshIconSmall"] {
-    qproperty-icon: url(theme:Light/refresh.svg);
-}
-
-* [themeID="cogsIcon"] {
-    qproperty-icon: url(theme:Light/cogs.svg);
-}
-
-#sourceInteractButton {
-    qproperty-icon: url(theme:Light/interact.svg);
-}
-
-* [themeID="upArrowIconSmall"] {
-    qproperty-icon: url(theme:Light/up.svg);
-}
-
-* [themeID="downArrowIconSmall"] {
-    qproperty-icon: url(theme:Light/down.svg);
-}
-
-* [themeID="pauseIconSmall"] {
-    qproperty-icon: url(theme:Light/media-pause.svg);
-}
-
-* [themeID="filtersIcon"] {
-    qproperty-icon: url(theme:Light/filter.svg);
-}
-
-QToolBarExtension {
-    qproperty-icon: url(theme:Light/dots-vert.svg);
-}
-
-/* ComboBox */
-QComboBox::down-arrow,
-QDateTimeEdit::down-arrow {
-    image: url(theme:Light/collapse.svg);
-}
-
-QComboBox::down-arrow:editable,
-QDateTimeEdit::down-arrow:editable {
-    image: url(theme:Light/down.svg);
-}
-
-/* Spinbox and doubleSpinbox */
-QSpinBox::up-arrow,
-QDoubleSpinBox::up-arrow {
-    image: url(theme:Light/up.svg);
-}
-
-QSpinBox::down-arrow,
-QDoubleSpinBox::down-arrow {
-    image: url(theme:Light/down.svg);
-}
-
-/* Buttons */
-QPushButton::menu-indicator {
-    image: url(theme:Light/down.svg);
-}
-
-/* Settings Icons */
-OBSBasicSettings {
-    qproperty-generalIcon: url(theme:Light/settings/general.svg);
-    qproperty-appearanceIcon: url(theme:Light/settings/appearance.svg);
-    qproperty-streamIcon: url(theme:Light/settings/stream.svg);
-    qproperty-outputIcon: url(theme:Light/settings/output.svg);
-    qproperty-audioIcon: url(theme:Light/settings/audio.svg);
-    qproperty-videoIcon: url(theme:Light/settings/video.svg);
-    qproperty-hotkeysIcon: url(theme:Light/settings/hotkeys.svg);
-    qproperty-accessibilityIcon: url(theme:Light/settings/accessibility.svg);
-    qproperty-advancedIcon: url(theme:Light/settings/advanced.svg);
-}
-
-/* Checkboxes */
-QCheckBox::indicator:unchecked,
-QGroupBox::indicator:unchecked {
-    image: url(theme:Light/checkbox_unchecked.svg);
-}
-
-QCheckBox::indicator:unchecked:hover,
-QGroupBox::indicator:unchecked:hover {
-    border: none;
-    image: url(theme:Light/checkbox_unchecked_focus.svg);
-}
-
-QCheckBox::indicator:checked,
-QGroupBox::indicator:checked {
-    image: url(theme:Light/checkbox_checked.svg);
-}
-
-QCheckBox::indicator:checked:hover,
-QGroupBox::indicator:checked:hover {
-    image: url(theme:Light/checkbox_checked_focus.svg);
-}
-
-QCheckBox::indicator:checked:disabled,
-QGroupBox::indicator:checked:disabled {
-    image: url(theme:Light/checkbox_checked_disabled.svg);
-}
-
-/* Locked CheckBox */
-QCheckBox[lockCheckBox=true]::indicator:checked,
-QCheckBox[lockCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Light/locked.svg);
-}
-
-/* Visibility CheckBox */
-QCheckBox[visibilityCheckBox=true]::indicator:checked,
-QCheckBox[visibilityCheckBox=true]::indicator:checked:hover {
-    image: url(theme:Light/visible.svg);
-}
-
-* [themeID="revertIcon"] {
-    qproperty-icon: url(theme:Light/revert.svg);
-}
-
-/* Mute CheckBox */
-MuteCheckBox::indicator:checked {
-    image: url(theme:Light/mute.svg);
-}
-
-MuteCheckBox::indicator:indeterminate {
-    image: url(theme:Light/unassigned.svg);
-}
-
-MuteCheckBox::indicator:unchecked {
-    image: url(theme:Light/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:hover {
-    image: url(theme:Light/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:unchecked:focus {
-    image: url(theme:Light/settings/audio.svg);
-}
-
-MuteCheckBox::indicator:checked:hover {
-    image: url(theme:Light/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:focus {
-    image: url(theme:Light/mute.svg);
-}
-
-MuteCheckBox::indicator:checked:disabled {
-    image: url(theme:Light/mute.svg);
-}
-
-MuteCheckBox::indicator:unchecked:disabled {
-    image: url(theme:Light/settings/audio.svg);
-}
-
-/* Sources List Group Collapse Checkbox */
-QCheckBox[sourceTreeSubItem=true]::indicator:checked,
-QCheckBox[sourceTreeSubItem=true]::indicator:checked:hover {
-    image: url(theme:Light/expand.svg);
-}
-
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked,
-QCheckBox[sourceTreeSubItem=true]::indicator:unchecked:hover {
-    image: url(theme:Light/collapse.svg);
-}
-
-/* Source Icons */
-OBSBasic {
-    qproperty-imageIcon: url(theme:Light/sources/image.svg);
-    qproperty-colorIcon: url(theme:Light/sources/brush.svg);
-    qproperty-slideshowIcon: url(theme:Light/sources/slideshow.svg);
-    qproperty-audioInputIcon: url(theme:Light/sources/microphone.svg);
-    qproperty-audioOutputIcon: url(theme:Light/settings/audio.svg);
-    qproperty-desktopCapIcon: url(theme:Light/settings/video.svg);
-    qproperty-windowCapIcon: url(theme:Light/sources/window.svg);
-    qproperty-gameCapIcon: url(theme:Light/sources/gamepad.svg);
-    qproperty-cameraIcon: url(theme:Light/sources/camera.svg);
-    qproperty-textIcon: url(theme:Light/sources/text.svg);
-    qproperty-mediaIcon: url(theme:Light/sources/media.svg);
-    qproperty-browserIcon: url(theme:Light/sources/globe.svg);
-    qproperty-groupIcon: url(theme:Light/sources/group.svg);
-    qproperty-sceneIcon: url(theme:Light/sources/scene.svg);
-    qproperty-defaultIcon: url(theme:Light/sources/default.svg);
-    qproperty-audioProcessOutputIcon: url(theme:Light/sources/windowaudio.svg);
-}
-
-/* Save icon */
-* [themeID="replayIconSmall"] {
-    qproperty-icon: url(theme:Light/save.svg);
-}
-
-/* Media icons */
-* [themeID="playIcon"] {
-    qproperty-icon: url(theme:Light/media/media_play.svg);
-}
-
-* [themeID="pauseIcon"] {
-    qproperty-icon: url(theme:Light/media/media_pause.svg);
-}
-
-* [themeID="restartIcon"] {
-    qproperty-icon: url(theme:Light/media/media_restart.svg);
-}
-
-* [themeID="stopIcon"] {
-    qproperty-icon: url(theme:Light/media/media_stop.svg);
-}
-
-* [themeID="nextIcon"] {
-    qproperty-icon: url(theme:Light/media/media_next.svg);
-}
-
-* [themeID="previousIcon"] {
-    qproperty-icon: url(theme:Light/media/media_previous.svg);
-}
-
-/* YouTube Integration */
-OBSYoutubeActions {
-    qproperty-thumbPlaceholder: url(theme:Light/sources/image.svg);
-}
-
-/* Calendar Widget */
-QDateTimeEdit::down-arrow {
-    image: url(theme:Light/down.svg);
-}
-
-/* Calendar Top Bar Buttons */
-#qt_calendar_monthbutton::menu-indicator {
-    image: url(theme:Light/down.svg);
-}
-
-QCalendarWidget #qt_calendar_prevmonth {
-    qproperty-icon: url(theme:Light/left.svg);
-}
-
-QCalendarWidget #qt_calendar_nextmonth {
-    qproperty-icon: url(theme:Light/right.svg);
-}

.config/posting/config.yaml

@@ -1 +0,0 @@
-theme: Catppuccin

.config/posting/themes/catppuccin_latte.yml

@@ -1,26 +0,0 @@
-name: Catppuccin
-primary: '#8839ef'
-secondary: '#40a02b'
-accent: '#7287fd'
-background: '#eff1f5'
-surface: '#ccd0da'
-error: '#d20f39'
-success: '#40a02b'
-warning: '#df8e1d'
-
-text_area:
-  gutter: 'bold #b4befe'
-  matched_bracket: 'white on #8839ef'
-url:
-  base: 'italic #1e66f5'
-  protocol: 'bold #40a02b'
-syntax:
-  json_key: 'italic #1e66f5'
-  json_number: '#fe640b'
-  json_string: '#40a02b'
-  json_boolean: '#8839ef'
-  json_null: 'underline #8839ef'
-
-author: Thomas Philippot
-description: A soothing pastel theme for the high-spirited!
-homepage: https://github.com/catppuccin/catppuccin

.config/posting/themes/catppuccin_macchiato.yml

@@ -1,26 +0,0 @@
-name: Catppuccin
-primary: '#c6a0f6'
-secondary: '#a6da95'
-accent: '#8aadf4'
-background: '#24273a'
-surface: '#363a4f'
-error: '#ed8796'
-success: '#a6da95'
-warning: '#eed49f'
-
-text_area:
-  gutter: 'bold #b4befe'
-  matched_bracket: 'black on #c6a0f6'
-url:
-  base: 'italic #91d7e3'
-  protocol: 'bold #a6da95'
-syntax:
-  json_key: 'italic #8aadf4'
-  json_number: '#f5a97f'
-  json_string: '#a6da95'
-  json_boolean: '#c6a0f6'
-  json_null: 'underline #c6a0f6'
-
-author: Thomas Philippot
-description: A soothing pastel theme for the high-spirited!
-homepage: https://github.com/catppuccin/catppuccin

.config/rofi/colors/adapta.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #222D32FF;
-    background-alt: #29353BFF;
-    foreground:     #B8C2C6FF;
-    selected:       #00BCD4FF;
-    active:         #21FF90FF;
-    urgent:         #FF4B60FF;
-}

.config/rofi/colors/arc.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #2F343FFF;
-    background-alt: #383C4AFF;
-    foreground:     #BAC5D0FF;
-    selected:       #5294E2FF;
-    active:         #98C379FF;
-    urgent:         #E06B74FF;
-}

.config/rofi/colors/black.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #000000FF;
-    background-alt: #101010FF;
-    foreground:     #FFFFFFFF;
-    selected:       #62AEEFFF;
-    active:         #98C379FF;
-    urgent:         #E06B74FF;
-}

.config/rofi/colors/catppuccin.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #24273a;
-    background-alt: #1e2030;
-    foreground:     #6c7086;
-    selected:       #8aadf4;
-    active:         #a6da95;
-    urgent:         #ed8796;
-}

.config/rofi/colors/cyberpunk.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #000B1EFF;
-    background-alt: #0A1528FF;
-    foreground:     #0ABDC6FF;
-    selected:       #0ABDC6FF;
-    active:         #00FF00FF;
-    urgent:         #FF0000FF;
-}

.config/rofi/colors/dracula.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #1E1F29FF;
-    background-alt: #282A36FF;
-    foreground:     #FFFFFFFF;
-    selected:       #BD93F9FF;
-    active:         #50FA7BFF;
-    urgent:         #FF5555FF;
-}

.config/rofi/colors/everforest.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #323D43FF;
-    background-alt: #3C474DFF;
-    foreground:     #DAD1BEFF;
-    selected:       #7FBBB3FF;
-    active:         #A7C080FF;
-    urgent:         #E67E80FF;
-}

.config/rofi/colors/gruvbox.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #282828FF;
-    background-alt: #353535FF;
-    foreground:     #EBDBB2FF;
-    selected:       #83A598FF;
-    active:         #B8BB26FF;
-    urgent:         #FB4934FF;
-}

.config/rofi/colors/latte.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #eff1f5;
-    background-alt: #e6e9ef;
-    foreground:     #9ca0b0;
-    selected:       #1e66f5;
-    active:         #40a02b;
-    urgent:         #d20f39;
-}

.config/rofi/colors/lovelace.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #1D1F28FF;
-    background-alt: #282A36FF;
-    foreground:     #FDFDFDFF;
-    selected:       #79E6F3FF;
-    active:         #5ADECDFF;
-    urgent:         #F37F97FF;
-}

.config/rofi/colors/macchiato.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #24273a;
-    background-alt: #1e2030;
-    foreground:     #6c7086;
-    selected:       #8aadf4;
-    active:         #a6da95;
-    urgent:         #ed8796;
-}

.config/rofi/colors/navy.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #021B21FF;
-    background-alt: #0C252BFF;
-    foreground:     #F2F1B9FF;
-    selected:       #44B5B1FF;
-    active:         #7CBF9EFF;
-    urgent:         #C2454EFF;
-}

.config/rofi/colors/nord.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #2E3440FF;
-    background-alt: #383E4AFF;
-    foreground:     #E5E9F0FF;
-    selected:       #81A1C1FF;
-    active:         #A3BE8CFF;
-    urgent:         #BF616AFF;
-}

.config/rofi/colors/onedark.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #1E2127FF;
-    background-alt: #282B31FF;
-    foreground:     #FFFFFFFF;
-    selected:       #61AFEFFF;
-    active:         #98C379FF;
-    urgent:         #E06C75FF;
-}

.config/rofi/colors/paper.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #F1F1F1FF;
-    background-alt: #E0E0E0FF;
-    foreground:     #252525FF;
-    selected:       #008EC4FF;
-    active:         #10A778FF;
-    urgent:         #C30771FF;
-}

.config/rofi/colors/solarized.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #002B36FF;
-    background-alt: #073642FF;
-    foreground:     #EEE8D5FF;
-    selected:       #268BD2FF;
-    active:         #859900FF;
-    urgent:         #DC322FFF;
-}

.config/rofi/colors/theme.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #24273a;
-    background-alt: #1e2030;
-    foreground:     #6c7086;
-    selected:       #8aadf4;
-    active:         #a6da95;
-    urgent:         #ed8796;
-}

.config/rofi/colors/tokyonight.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Levi Lacoss (fishyfishfish55)
- * Github : @fishyfishfish55
- *
- * Colors
- **/
-
-* {
-    background:     #15161EFF;
-    background-alt: #1A1B26FF;
-    foreground:     #C0CAF5FF;
-    selected:       #33467CFF;
-    active:         #414868FF;
-    urgent:         #F7768EFF;
-}

.config/rofi/colors/yousai.rasi

@@ -1,16 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Colors
- **/
-
-* {
-    background:     #F5E7DEFF;
-    background-alt: #EBDCD2FF;
-    foreground:     #34302DFF;
-    selected:       #D97742FF;
-    active:         #BF8F60FF;
-    urgent:         #B23636FF;
-}

.config/rofi/config.rasi

@@ -1,181 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Configuration For Rofi Version: 1.7.3
- **/
-
-configuration {
-	/*---------- General setting ----------*/
-	modi: "drun,run,filebrowser,window";
-	case-sensitive: false;
-	cycle: true;
-	filter: "";
-	scroll-method: 0;
-	normalize-match: true;
-	show-icons: true;
-	icon-theme: "Papirus";
-/*	cache-dir: ;*/
-	steal-focus: false;
-/*	dpi: -1;*/
-
-	/*---------- Matching setting ----------*/
-	matching: "normal";
-	tokenize: true;
-
-	/*---------- SSH settings ----------*/
-	ssh-client: "ssh";
-	ssh-command: "{terminal} -e {ssh-client} {host} [-p {port}]";
-	parse-hosts: true;
-	parse-known-hosts: true;
-
-	/*---------- Drun settings ----------*/
-	drun-categories: "";
-	drun-match-fields: "name,generic,exec,categories,keywords";
-	drun-display-format: "{name} [<span weight='light' size='small'><i>({generic})</i></span>]";
-	drun-show-actions: false;
-	drun-url-launcher: "xdg-open";
-	drun-use-desktop-cache: false;
-	drun-reload-desktop-cache: false;
-	drun {
-		/** Parse user desktop files. */
-		parse-user:   true;
-		/** Parse system desktop files. */
-		parse-system: true;
-    }
-
-	/*---------- Run settings ----------*/
-	run-command: "{cmd}";
-	run-list-command: "";
-	run-shell-command: "{terminal} -e {cmd}";
-
-	/*---------- Fallback Icon ----------*/
-	run,drun {
-		fallback-icon: "application-x-addon";
-	}
-
-	/*---------- Window switcher settings ----------*/
-	window-match-fields: "title,class,role,name,desktop";
-	window-command: "wmctrl -i -R {window}";
-	window-format: "{w} - {c} - {t:0}";
-	window-thumbnail: false;
-
-	/*---------- Combi settings ----------*/
-/*	combi-modi: "window,run";*/
-/*	combi-hide-mode-prefix: false;*/
-/*	combi-display-format: "{mode} {text}";*/
-
-	/*---------- History and Sorting ----------*/
-	disable-history: false;
-	sorting-method: "normal";
-	max-history-size: 25;
-
-	/*---------- Display setting ----------*/
-	display-window: "Windows";
-	display-windowcd: "Window CD";
-	display-run: "Run";
-	display-ssh: "SSH";
-	display-drun: "Apps";
-	display-combi: "Combi";
-	display-keys: "Keys";
-	display-filebrowser: "Files";
-
-	/*---------- Misc setting ----------*/
-	terminal: "rofi-sensible-terminal";
-	font: "Mono 12";
-	sort: false;
-	threads: 0;
-	click-to-exit: true;
-/*	ignored-prefixes: "";*/
-/*	pid: "/run/user/1000/rofi.pid";*/
-
-	/*---------- File browser settings ----------*/
-    filebrowser {
-/*	  directory: "/home";*/
-      directories-first: true;
-      sorting-method:    "name";
-    }
-
-	/*---------- Other settings ----------*/
-    timeout {
-      action: "kb-cancel";
-      delay:  0;
-    }
-
-	/*---------- Keybindings ----------*/
-/*
-	kb-primary-paste: "Control+V,Shift+Insert";
-	kb-secondary-paste: "Control+v,Insert";
-	kb-clear-line: "Control+w";
-	kb-move-front: "Control+a";
-	kb-move-end: "Control+e";
-	kb-move-word-back: "Alt+b,Control+Left";
-	kb-move-word-forward: "Alt+f,Control+Right";
-	kb-move-char-back: "Left,Control+b";
-	kb-move-char-forward: "Right,Control+f";
-	kb-remove-word-back: "Control+Alt+h,Control+BackSpace";
-	kb-remove-word-forward: "Control+Alt+d";
-	kb-remove-char-forward: "Delete,Control+d";
-	kb-remove-char-back: "BackSpace,Shift+BackSpace,Control+h";
-	kb-remove-to-eol: "Control+k";
-	kb-remove-to-sol: "Control+u";
-	kb-accept-entry: "Control+j,Control+m,Return,KP_Enter";
-	kb-accept-custom: "Control+Return";
-	kb-accept-custom-alt: "Control+Shift+Return";
-	kb-accept-alt: "Shift+Return";
-	kb-delete-entry: "Shift+Delete";
-	kb-mode-next: "Shift+Right,Control+Tab";
-	kb-mode-previous: "Shift+Left,Control+ISO_Left_Tab";
-	kb-mode-complete: "Control+l";
-	kb-row-left: "Control+Page_Up";
-	kb-row-right: "Control+Page_Down";
-	kb-row-down: "Down,Control+n";
-	kb-page-prev: "Page_Up";
-	kb-page-next: "Page_Down";
-	kb-row-first: "Home,KP_Home";
-	kb-row-last: "End,KP_End";
-	kb-row-select: "Control+space";
-	kb-screenshot: "Alt+S";
-	kb-ellipsize: "Alt+period";
-	kb-toggle-case-sensitivity: "grave,dead_grave";
-	kb-toggle-sort: "Alt+grave";
-	kb-cancel: "Escape,Control+g,Control+bracketleft";
-	kb-custom-1: "Alt+1";
-	kb-custom-2: "Alt+2";
-	kb-custom-3: "Alt+3";
-	kb-custom-4: "Alt+4";
-	kb-custom-5: "Alt+5";
-	kb-custom-6: "Alt+6";
-	kb-custom-7: "Alt+7";
-	kb-custom-8: "Alt+8";
-	kb-custom-9: "Alt+9";
-	kb-custom-10: "Alt+0";
-	kb-custom-11: "Alt+exclam";
-	kb-custom-12: "Alt+at";
-	kb-custom-13: "Alt+numbersign";
-	kb-custom-14: "Alt+dollar";
-	kb-custom-15: "Alt+percent";
-	kb-custom-16: "Alt+dead_circumflex";
-	kb-custom-17: "Alt+ampersand";
-	kb-custom-18: "Alt+asterisk";
-	kb-custom-19: "Alt+parenleft";
-	kb-select-1: "Super+1";
-	kb-select-2: "Super+2";
-	kb-select-3: "Super+3";
-	kb-select-4: "Super+4";
-	kb-select-5: "Super+5";
-	kb-select-6: "Super+6";
-	kb-select-7: "Super+7";
-	kb-select-8: "Super+8";
-	kb-select-9: "Super+9";
-	kb-select-10: "Super+0";
-	ml-row-left: "ScrollLeft";
-	ml-row-right: "ScrollRight";
-	ml-row-up: "ScrollUp";
-	ml-row-down: "ScrollDown";
-	me-select-entry: "MousePrimary";
-	me-accept-entry: "MouseDPrimary";
-	me-accept-custom: "Control+MouseDPrimary";
-*/
-}

.config/rofi/fonts.rasi

@@ -1,12 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Fonts
- *
- **/
-
-* {
-    font: "Iosevka Nerd Font 10";
-}

.config/rofi/launcher.rasi

@@ -1,171 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Rofi Theme File
- * Rofi Version: 1.7.3
- **/
-
-/*****----- Configuration -----*****/
-configuration {
-	modi:                       "drun";
-    show-icons:                 true;
-    display-drun:               "";
-	drun-display-format:        "{name}";
-}
-
-/*****----- Global Properties -----*****/
-@import                          "~/.config/rofi/colors/theme.rasi"
-@import                          "~/.config/rofi/fonts.rasi"
-
-/*****----- Main Window -----*****/
-window {
-    transparency:                "real";
-    location:                    center;
-    anchor:                      center;
-    fullscreen:                  false;
-    width:                       700px;
-    x-offset:                    0px;
-    y-offset:                    0px;
-
-    enabled:                     true;
-    margin:                      0px;
-    padding:                     0px;
-    border:                      2px;
-    border-radius:               12px;
-    border-color:                @selected;
-    background-color:            @background;
-    cursor:                      "default";
-}
-
-/*****----- Main Box -----*****/
-mainbox {
-    enabled:                     true;
-    spacing:                     10px;
-    margin:                      0px;
-    padding:                     20px;
-    border:                      0px solid;
-    border-radius:               0px 0px 0px 0px;
-    border-color:                @selected;
-    background-color:            transparent;
-    children:                    [ "inputbar", "listview" ];
-}
-
-/*****----- Inputbar -----*****/
-inputbar {
-    enabled:                     true;
-    spacing:                     10px;
-    margin:                      0px;
-    padding:                     15px;
-    border:                      0px solid;
-    border-radius:               12px;
-    border-color:                @selected;
-    background-color:            @background-alt;
-    text-color:                  @foreground;
-    children:                    [ "prompt", "entry" ];
-}
-
-prompt {
-    enabled:                     true;
-    background-color:            inherit;
-    text-color:                  inherit;
-}
-textbox-prompt-colon {
-    enabled:                     true;
-    expand:                      false;
-    str:                         "::";
-    background-color:            inherit;
-    text-color:                  inherit;
-}
-entry {
-    enabled:                     true;
-    background-color:            inherit;
-    text-color:                  inherit;
-    cursor:                      text;
-    placeholder:                 "Search...";
-    placeholder-color:           inherit;
-}
-
-/*****----- Listview -----*****/
-listview {
-    enabled:                     true;
-    columns:                     2;
-    lines:                       8;
-    cycle:                       true;
-    dynamic:                     true;
-    scrollbar:                   false;
-    layout:                      vertical;
-    reverse:                     false;
-    fixed-height:                true;
-    fixed-columns:               true;
-    
-    spacing:                     5px;
-    margin:                      0px;
-    padding:                     0px;
-    border:                      0px solid;
-    border-radius:               0px;
-    border-color:                @selected;
-    background-color:            transparent;
-    text-color:                  @foreground;
-    cursor:                      "default";
-}
-scrollbar {
-    handle-width:                5px ;
-    handle-color:                @selected;
-    border-radius:               0px;
-    background-color:            @background-alt;
-}
-
-/*****----- Elements -----*****/
-element {
-    enabled:                     true;
-    spacing:                     10px;
-    margin:                      0px;
-    padding:                     5px;
-    border:                      0px solid;
-    border-radius:               12px;
-    border-color:                @selected;
-    background-color:            transparent;
-    text-color:                  @foreground;
-    cursor:                      pointer;
-}
-element normal.normal {
-    background-color:            @background;
-    text-color:                  @foreground;
-}
-element selected.normal {
-    background-color:            @selected;
-    text-color:                  @background;
-}
-element-icon {
-    background-color:            transparent;
-    text-color:                  inherit;
-    size:                        32px;
-    cursor:                      inherit;
-}
-element-text {
-    background-color:            transparent;
-    text-color:                  inherit;
-    highlight:                   inherit;
-    cursor:                      inherit;
-    vertical-align:              0.5;
-    horizontal-align:            0.0;
-}
-
-/*****----- Message -----*****/
-error-message {
-    padding:                     15px;
-    border:                      2px solid;
-    border-radius:               12px;
-    border-color:                @selected;
-    background-color:            @background;
-    text-color:                  @foreground;
-}
-textbox {
-    background-color:            @background;
-    text-color:                  @foreground;
-    vertical-align:              0.5;
-    horizontal-align:            0.0;
-    highlight:                   none;
-}

.config/rofi/theme.rasi

@@ -1,171 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Rofi Theme File
- * Rofi Version: 1.7.3
- **/
-
-/*****----- Configuration -----*****/
-configuration {
-	modi:                       "drun";
-    show-icons:                 false;
-    display-drun:               "search";
-	drun-display-format:        "{name}";
-}
-
-/*****----- Global Properties -----*****/
-@import                          "~/.config/rofi/colors/theme.rasi"
-@import                          "~/.config/rofi/fonts.rasi"
-
-/*****----- Main Window -----*****/
-window {
-    transparency:                "real";
-    location:                    center;
-    anchor:                      center;
-    fullscreen:                  false;
-    width:                       400px;
-    x-offset:                    0px;
-    y-offset:                    0px;
-
-    enabled:                     true;
-    margin:                      0px;
-    padding:                     0px;
-    border:                      0px solid;
-    border-radius:               12px;
-    border-color:                @selected;
-    background-color:            @background;
-    cursor:                      "default";
-}
-
-/*****----- Main Box -----*****/
-mainbox {
-    enabled:                     true;
-    spacing:                     0px;
-    margin:                      0px;
-    padding:                     0px;
-    border:                      0px solid;
-    border-radius:               0px 0px 0px 0px;
-    border-color:                @selected;
-    background-color:            transparent;
-    children:                    [ "inputbar", "listview" ];
-}
-
-/*****----- Inputbar -----*****/
-inputbar {
-    enabled:                     false;
-    spacing:                     10px;
-    margin:                      0px;
-    padding:                     15px;
-    border:                      0px solid;
-    border-radius:               0px;
-    border-color:                @selected;
-    background-color:            @selected;
-    text-color:                  @background;
-    children:                    [ "prompt", "entry" ];
-}
-
-prompt {
-    enabled:                     true;
-    background-color:            inherit;
-    text-color:                  inherit;
-}
-textbox-prompt-colon {
-    enabled:                     true;
-    expand:                      false;
-    str:                         "::";
-    background-color:            inherit;
-    text-color:                  inherit;
-}
-entry {
-    enabled:                     true;
-    background-color:            inherit;
-    text-color:                  inherit;
-    cursor:                      text;
-    placeholder:                 "Search...";
-    placeholder-color:           inherit;
-}
-
-/*****----- Listview -----*****/
-listview {
-    enabled:                     true;
-    columns:                     1;
-    lines:                       6;
-    cycle:                       true;
-    dynamic:                     true;
-    scrollbar:                   false;
-    layout:                      vertical;
-    reverse:                     false;
-    fixed-height:                true;
-    fixed-columns:               true;
-    
-    spacing:                     5px;
-    margin:                      0px;
-    padding:                     0px;
-    border:                      0px solid;
-    border-radius:               0px;
-    border-color:                @selected;
-    background-color:            transparent;
-    text-color:                  @foreground;
-    cursor:                      "default";
-}
-scrollbar {
-    handle-width:                5px ;
-    handle-color:                @selected;
-    border-radius:               0px;
-    background-color:            @background-alt;
-}
-
-/*****----- Elements -----*****/
-element {
-    enabled:                     true;
-    spacing:                     10px;
-    margin:                      0px;
-    padding:                     8px;
-    border:                      0px solid;
-    border-radius:               0px;
-    border-color:                @selected;
-    background-color:            transparent;
-    text-color:                  @foreground;
-    cursor:                      pointer;
-}
-element normal.normal {
-    background-color:            @background;
-    text-color:                  @foreground;
-}
-element selected.normal {
-    background-color:            @background-alt;
-    text-color:                  @foreground;
-}
-element-icon {
-    background-color:            transparent;
-    text-color:                  inherit;
-    size:                        32px;
-    cursor:                      inherit;
-}
-element-text {
-    background-color:            transparent;
-    text-color:                  inherit;
-    highlight:                   inherit;
-    cursor:                      inherit;
-    vertical-align:              0.5;
-    horizontal-align:            0.0;
-}
-
-/*****----- Message -----*****/
-error-message {
-    padding:                     15px;
-    border:                      2px solid;
-    border-radius:               12px;
-    border-color:                @selected;
-    background-color:            @background;
-    text-color:                  @foreground;
-}
-textbox {
-    background-color:            @background;
-    text-color:                  @foreground;
-    vertical-align:              0.5;
-    horizontal-align:            0.0;
-    highlight:                   none;
-}

.config/rofi/window.rasi

@@ -1,151 +0,0 @@
-/**
- *
- * Author : Aditya Shakya (adi1090x)
- * Github : @adi1090x
- * 
- * Rofi Theme File
- * Rofi Version: 1.7.3
- **/
-
-/*****----- Configuration -----*****/
-configuration {
-	modi:                       "drun";
-    show-icons:                 true;
-    display-drun:               " Applications";
-	drun-display-format:        "{name}";
-}
-
-/*****----- Global Properties -----*****/
-@import                          "~/.config/rofi/colors/theme.rasi"
-@import                          "~/.config/rofi/fonts.rasi"
-
-/*****----- Main Window -----*****/
-window {
-    transparency:                "real";
-    location:                    center;
-    anchor:                      center;
-    fullscreen:                  false;
-    width:                       450px;
-    x-offset:                    0px;
-    y-offset:                    0px;
-
-    enabled:                     true;
-    margin:                      0px;
-    padding:                     0px;
-    border:                      0px solid;
-    border-radius:               0px;
-    border-color:                @selected;
-    background-color:            @background;
-    cursor:                      "default";
-}
-
-/*****----- Main Box -----*****/
-mainbox {
-    enabled:                     true;
-    spacing:                     0px;
-    margin:                      0px;
-    padding:                     0px;
-    border:                      0px solid;
-    border-radius:               0px 0px 0px 0px;
-    border-color:                @selected;
-    background-color:            transparent;
-    children:                    [ "listview", "entry" ];
-}
-
-/*****----- Inputbar -----*****/
-entry {
-    enabled:                     true;
-    expand:                      false;
-    padding:                     20px 0px;
-    background-color:            @selected;
-    text-color:                  @background;
-    cursor:                      text;
-    placeholder:                 "Search...";
-    placeholder-color:           inherit;
-    vertical-align:              0.5;
-    horizontal-align:            0.5;
-}
-
-/*****----- Listview -----*****/
-listview {
-    enabled:                     true;
-    columns:                     3;
-    lines:                       3;
-    cycle:                       true;
-    dynamic:                     true;
-    scrollbar:                   false;
-    layout:                      vertical;
-    reverse:                     false;
-    fixed-height:                true;
-    fixed-columns:               true;
-    
-    spacing:                     0px;
-    margin:                      0px;
-    padding:                     20px;
-    border:                      0px solid;
-    border-radius:               0px;
-    border-color:                @selected;
-    background-color:            transparent;
-    text-color:                  @foreground;
-    cursor:                      "default";
-}
-scrollbar {
-    handle-width:                5px ;
-    handle-color:                @selected;
-    border-radius:               0px;
-    background-color:            @background-alt;
-}
-
-/*****----- Elements -----*****/
-element {
-    enabled:                     true;
-    spacing:                     15px;
-    margin:                      0px;
-    padding:                     20px 10px;
-    border:                      0px solid;
-    border-radius:               0px;
-    border-color:                @selected;
-    background-color:            transparent;
-    text-color:                  @foreground;
-    orientation:                 vertical;
-    cursor:                      pointer;
-}
-element normal.normal {
-    background-color:            @background;
-    text-color:                  @foreground;
-}
-element selected.normal {
-    background-color:            @background-alt;
-    text-color:                  @foreground;
-}
-element-icon {
-    background-color:            transparent;
-    text-color:                  inherit;
-    size:                        64px;
-    cursor:                      inherit;
-}
-element-text {
-    background-color:            transparent;
-    text-color:                  inherit;
-    highlight:                   inherit;
-    cursor:                      inherit;
-    vertical-align:              0.5;
-    horizontal-align:            0.5;
-}
-
-/*****----- Message -----*****/
-error-message {
-    padding:                     15px;
-    border:                      0px solid;
-    border-radius:               0px;
-    border-color:                @selected;
-    background-color:            @background;
-    text-color:                  @foreground;
-}
-textbox {
-    background-color:            @background;
-    text-color:                  @foreground;
-    vertical-align:              0.5;
-    horizontal-align:            0.0;
-    highlight:                   none;
-}

.config/tidal-hi-fi/catppuccin_macchiato.css

@@ -1,140 +0,0 @@
---wave-color-material-dark: #363a4f;
---wave-color-material-light: #494d64;
---wave-color-opacity-base-bright-thick: fade(#1e2030, 60%);
---wave-color-opacity-base-bright-thin: fade(#1e2030, 20%);
---wave-color-opacity-base-bright-transparent: #1e2030;
---wave-color-opacity-base-bright-ultra-thick: fade(#1e2030, 80%);
---wave-color-opacity-base-brightest-regular: fade(#24273a, 40%);
---wave-color-opacity-base-brightest-thin: fade(#24273a, 20%);
---wave-color-opacity-base-brightest-ultra-thin: fade(#24273a, 10%);
---wave-color-opacity-base-brighter-ultra-thick: fade(#363a4f, 80%);
---wave-color-opacity-base-fill-regular:  fade(#181926, 40%);
---wave-color-opacity-base-fill-thick: fade(#181926, 60%);
---wave-color-opacity-base-fill-thin: #181926;
---wave-color-opacity-base-fill-transparent: #181926;
---wave-color-opacity-base-fill-ultra-thick: fade(#181926, 10%);
---wave-color-opacity-base-fill-ultra-thin: fade(#181926, 10%);
---wave-color-opacity-contrast-fill-regular: fade(#cad3f5, 40%);
---wave-color-opacity-contrast-fill-thin: fade(#cad3f5, 20%);
---wave-color-opacity-contrast-fill-ultra-thin: fade(#6e738d, 40%);
---wave-color-opacity-contrast-fill-transparent: #cad3f5;
---wave-color-opacity-contrast-fill-thick: #a5adcb;
---wave-color-opacity-contrast-fill-ultra-thick: #a5adcb;
---wave-color-opacity-rainbow-blue-thin: fade(#8aadf4, 8%);
---wave-color-solid-accent-fill: #7dc4e4;
---wave-color-solid-accent-bright: lighten(#7dc4e4, 7%);
---wave-color-solid-accent-brighter: lighten(#7dc4e4, 8%);
---wave-color-solid-accent-dark: darken(#7dc4e4, 5%);
---wave-color-solid-accent-darker: darken(#7dc4e4, 8%);
---wave-color-solid-accent-darkest: darken(#7dc4e4, 9%);
---wave-color-solid-base-fill: #24273a;
---wave-color-solid-contrast-fill: #cad3f5;
---wave-color-solid-base-bright: #363a4f;
---wave-color-solid-base-brighter: #363a4f;
---wave-color-solid-base-brightest: #494d64;
---wave-color-solid-base-brighter-ultra-thick: #494d64;
---wave-color-solid-contrast-dark: #cad3f5;
---wave-color-solid-contrast-darker: #a5adcb;
---wave-color-solid-contrast-darkest: #b8c0e0;
---wave-color-solid-rainbow-blue-fill: #8aadf4;
---wave-color-solid-rainbow-green-brighter: lighten(#a6da95, 8%);
---wave-color-solid-rainbow-green-dark: darken(#a6da95, 5%);
---wave-color-solid-rainbow-green-darker: darken(#a6da95, 8%);
---wave-color-solid-rainbow-green-darkest: darken(#a6da95, 9%);
---wave-color-solid-rainbow-green-fill: #a6da95;
---wave-color-solid-rainbow-orange-fill: #f5a97f;
---wave-color-solid-rainbow-purple-fill: #c6a0f6;
---wave-color-solid-rainbow-red-bright: lighten(#ed8796, 2%);
---wave-color-solid-rainbow-red-brighter: lighten(#ed8796, 3%);
---wave-color-solid-rainbow-red-dark: darken(#ed8796, 6%);
---wave-color-solid-rainbow-red-darker: darken(#ed8796, 8%);
---wave-color-solid-rainbow-red-darkest: darken(#ed8796, 9%);
---wave-color-solid-rainbow-red-fill: #ed8796;
---wave-color-solid-rainbow-yellow-bright: lighten(#eed49f, 3%);
---wave-color-solid-rainbow-yellow-brighter: lighten(#eed49f, 9%);
---wave-color-solid-rainbow-yellow-dark: darken(#eed49f, 6%);
---wave-color-solid-rainbow-yellow-darker: darken(#eed49f, 8%);
---wave-color-solid-rainbow-yellow-darkest: darken(#eed49f, 9%);
---wave-color-solid-rainbow-yellow-fill: #eed49f;
---wave-color-solid-special-bright: lighten(#f5a97f, 3%);
---wave-color-solid-special-brighter: lighten(#f5a97f, 9%);
---wave-color-solid-special-dark: darken(#f5a97f, 6%);
---wave-color-solid-special-darker: darken(#f5a97f, 8%);
---wave-color-solid-special-darkest: darken(#f5a97f, 9%);
---wave-color-solid-special-fill: #f5a97f;
---wave-color-solid-warning-bright: lighten(#ed8796, 3%);
---wave-color-solid-warning-brighter: lighten(#ed8796, 9%);
---wave-color-solid-warning-dark: darken(#ed8796, 6%);
---wave-color-solid-warning-darker: darken(#ed8796, 8%);
---wave-color-solid-warning-darkest: darken(#ed8796, 9%);
---wave-color-solid-warning-fill: #ed8796;
-
-[data-wave-color="textDefault"],
-[class^="css--"],
-[class^="icon"],
-[class*="smallHeader"] .artist-link a,
-[class*="smallHeader"] .artist-link span {
-    color: #cad3f5;
-}
-
-[class*="primary"] [data-wave-color="textDefault"],
-[class*="activeTab"] [data-wave-color="textDefault"],
-[class*="primary"] [class^="icon"],
-[class*="activeTab"] [class^="icon"] {
-    color: #24273a;
-}
-
-[class*="accentedIcon"],
-[data-wave-color="textUrl"] {
-    color: #7dc4e4;
-}
-
-[data-test="stream-metadata"] [class^="textContainer"] span {
-    color: #1e2030 !important;
-}
-
-[data-wave-color="textSecondary"] {
-    color: #a5adcb;
-}
-
-[class*="_wave-btn-rank-secondary"] {
-    background-color: #494d64;
-}
-
-[class*="iconsWrapper"] [class*="icons"] {
-    background-color: fade(#7dc4e4, 30%) !important;
-}
-
-[class*="_wave-btn-rank-primary"] {
-    background-color: #cad3f5;
-    color: #24273a !important;
-}
-
-[class*="_wave-btn-rank-primary"]:hover {
-    background-color: #24273a;
-    color: #cad3f5 !important;
-}
-
-[class*="_wave-badge-color-default"] {
-    color: #cad3f5;
-    background-color: fade(#cad3f5, 20%);
-}
-
-[class*="_wave-badge-color-high"] {
-    color: #7dc4e4;
-    background-color: fade(#7dc4e4, 20%);
-}
-
-[class*="_wave-badge-color-max"] {
-    color: #eed49f;
-    background-color: fade(#eed49f, 20%);
-}
-
-.ReactModal__Content [data-type="page"] {
-    background-color: #363a4f;
-}
-
-.ReactModal__Overlay {
-    background-color: fade(#6e738d, 50%) !important;
-}
-

.config/tmux/tmux.conf

@@ -1,24 +0,0 @@
-# Set true color
-set-option -sa terminal-overrides ",xterm*:Tc"
-set -g mouse on
-
-# Set prefix
-unbind C-b
-set -g prefix C-Space
-bind C-Space send-prefix
-
-# Start windows and panes at 1, not 0
-set -g base-index 1
-set -g pane-base-index 1
-set-window-option -g pane-base-index 1
-set-option -g renumber-windows on
-
-set -g @catppuccin_flavour 'macchiato'
-set -g @catppuccin_status_modules_right "application session load"
-
-set -g @plugin 'tmux-plugins/tpm'
-set -g @plugin 'tmux-plugins/tmux-sensible'
-set -g @plugin 'catppuccin/tmux'
-set -g @plugin 'jamesoff/tmux-loadavg'
-
-run '~/.tmux/plugins/tpm/tpm'

.config/zathura/zathurarc

@@ -1 +0,0 @@
-include noctaliarc

.config/zsh/aliases

@@ -1,29 +0,0 @@
-# File system
-if command -v eza &> /dev/null; then
-  alias ls='eza -lh --group-directories-first --icons=auto'
-  alias lsa='ls -a'
-  alias lt='eza --tree --level=2 --long --icons --git'
-  alias lta='lt -a'
-fi
-
-if [[ "$TERM" == "xterm-kitty" ]]; then
-  alias ff="fzf --preview 'case \$(file --mime-type -b {}) in image/*) kitty icat --clear --transfer-mode=memory --stdin=no --place=\${FZF_PREVIEW_COLUMNS}x\${FZF_PREVIEW_LINES}@0x0 {} ;; *) bat --style=numbers --color=always {} ;; esac'"
-fi
-
-
-# Tools
-#alias c='opencode'
-#alias cx='printf "\033[2J\033[3J\033[H" && claude --permission-mode bypassPermissions'
-#alias d='docker'
-#alias r='rails'
-#alias t='tmux attach || tmux new -s Work'
-#alias ic='tdl c'
-#alias ix='tdl cx'
-#alias icx='tdl c cx'
-#n() { if [ "$#" -eq 0 ]; then command nvim . ; else command nvim "$@"; fi; }
-
-# Git
-alias g='git'
-alias gcm='git commit -m'
-alias gcam='git commit -a -m'
-alias gcad='git commit -a --amend'

.gitignore

@@ -1,2 +0,0 @@
-.idea/
-

.oh-my-zsh/oh-my-zsh.sh

@@ -1,234 +0,0 @@
-# ANSI formatting function (\033[<code>m)
-# 0: reset, 1: bold, 4: underline, 22: no bold, 24: no underline, 31: red, 33: yellow
-omz_f() {
-  [ $# -gt 0 ] || return
-  IFS=";" printf "\033[%sm" $*
-}
-# If stdout is not a terminal ignore all formatting
-[ -t 1 ] || omz_f() { :; }
-
-# Protect against non-zsh execution of Oh My Zsh (use POSIX syntax here)
-[ -n "$ZSH_VERSION" ] || {
-  omz_ptree() {
-    # Get process tree of the current process
-    pid=$$; pids="$pid"
-    while [ ${pid-0} -ne 1 ] && ppid=$(ps -e -o pid,ppid | awk "\$1 == $pid { print \$2 }"); do
-      pids="$pids $pid"; pid=$ppid
-    done
-
-    # Show process tree
-    case "$(uname)" in
-    Linux) ps -o ppid,pid,command -f -p $pids 2>/dev/null ;;
-    Darwin|*) ps -o ppid,pid,command -p $pids 2>/dev/null ;;
-    esac
-
-    # If ps command failed, try Busybox ps
-    [ $? -eq 0 ] || ps -o ppid,pid,comm | awk "NR == 1 || index(\"$pids\", \$2) != 0"
-  }
-
-  {
-    shell=$(ps -o pid,comm | awk "\$1 == $$ { print \$2 }")
-    printf "$(omz_f 1 31)Error:$(omz_f 22) Oh My Zsh can't be loaded from: $(omz_f 1)${shell}$(omz_f 22). "
-    printf "You need to run $(omz_f 1)zsh$(omz_f 22) instead.$(omz_f 0)\n"
-    printf "$(omz_f 33)Here's the process tree:$(omz_f 22)\n\n"
-    omz_ptree
-    printf "$(omz_f 0)\n"
-  } >&2
-
-  return 1
-}
-
-# Check if in emulation mode, if so early return
-# https://github.com/ohmyzsh/ohmyzsh/issues/11686
-[[ "$(emulate)" = zsh ]] || {
-  printf "$(omz_f 1 31)Error:$(omz_f 22) Oh My Zsh can't be loaded in \`$(emulate)\` emulation mode.$(omz_f 0)\n" >&2
-  return 1
-}
-
-unset -f omz_f
-
-# If ZSH is not defined, use the current script's directory.
-[[ -n "$ZSH" ]] || export ZSH="${${(%):-%x}:a:h}"
-
-# Set ZSH_CUSTOM to the path where your custom config files
-# and plugins exists, or else we will use the default custom/
-[[ -n "$ZSH_CUSTOM" ]] || ZSH_CUSTOM="$ZSH/custom"
-
-# Set ZSH_CACHE_DIR to the path where cache files should be created
-# or else we will use the default cache/
-[[ -n "$ZSH_CACHE_DIR" ]] || ZSH_CACHE_DIR="$ZSH/cache"
-
-# Make sure $ZSH_CACHE_DIR is writable, otherwise use a directory in $HOME
-if [[ ! -w "$ZSH_CACHE_DIR" ]]; then
-  ZSH_CACHE_DIR="${XDG_CACHE_HOME:-$HOME/.cache}/oh-my-zsh"
-fi
-
-# Create cache and completions dir and add to $fpath
-mkdir -p "$ZSH_CACHE_DIR/completions"
-(( ${fpath[(Ie)$ZSH_CACHE_DIR/completions]} )) || fpath=("$ZSH_CACHE_DIR/completions" $fpath)
-
-# Check for updates on initial load...
-source "$ZSH/tools/check_for_upgrade.sh"
-
-# Initializes Oh My Zsh
-
-# add a function path
-fpath=($ZSH/{functions,completions} $ZSH_CUSTOM/{functions,completions} $fpath)
-
-# Load all stock functions (from $fpath files) called below.
-autoload -U compaudit compinit zrecompile
-
-is_plugin() {
-  local base_dir=$1
-  local name=$2
-  builtin test -f $base_dir/plugins/$name/$name.plugin.zsh \
-    || builtin test -f $base_dir/plugins/$name/_$name
-}
-
-# Add all defined plugins to fpath. This must be done
-# before running compinit.
-for plugin ($plugins); do
-  if is_plugin "$ZSH_CUSTOM" "$plugin"; then
-    fpath=("$ZSH_CUSTOM/plugins/$plugin" $fpath)
-  elif is_plugin "$ZSH" "$plugin"; then
-    fpath=("$ZSH/plugins/$plugin" $fpath)
-  else
-    echo "[oh-my-zsh] plugin '$plugin' not found"
-  fi
-done
-
-# Figure out the SHORT hostname
-if [[ "$OSTYPE" = darwin* ]]; then
-  # macOS's $HOST changes with dhcp, etc. Use LocalHostName if possible.
-  SHORT_HOST=$(scutil --get LocalHostName 2>/dev/null) || SHORT_HOST="${HOST/.*/}"
-else
-  SHORT_HOST="${HOST/.*/}"
-fi
-
-# Save the location of the current completion dump file.
-if [[ -z "$ZSH_COMPDUMP" ]]; then
-  ZSH_COMPDUMP="${ZDOTDIR:-$HOME}/.zcompdump-${SHORT_HOST}-${ZSH_VERSION}"
-fi
-
-# Construct zcompdump OMZ metadata
-zcompdump_revision="#omz revision: $(builtin cd -q "$ZSH"; git rev-parse HEAD 2>/dev/null)"
-zcompdump_fpath="#omz fpath: $fpath"
-
-# Delete the zcompdump file if OMZ zcompdump metadata changed
-if ! command grep -q -Fx "$zcompdump_revision" "$ZSH_COMPDUMP" 2>/dev/null \
-   || ! command grep -q -Fx "$zcompdump_fpath" "$ZSH_COMPDUMP" 2>/dev/null; then
-  command rm -f "$ZSH_COMPDUMP"
-  zcompdump_refresh=1
-fi
-
-if [[ "$ZSH_DISABLE_COMPFIX" != true ]]; then
-  source "$ZSH/lib/compfix.zsh"
-  # Load only from secure directories
-  compinit -i -d "$ZSH_COMPDUMP"
-  # If completion insecurities exist, warn the user
-  handle_completion_insecurities &|
-else
-  # If the user wants it, load from all found directories
-  compinit -u -d "$ZSH_COMPDUMP"
-fi
-
-# Append zcompdump metadata if missing
-if (( $zcompdump_refresh )) \
-  || ! command grep -q -Fx "$zcompdump_revision" "$ZSH_COMPDUMP" 2>/dev/null; then
-  # Use `tee` in case the $ZSH_COMPDUMP filename is invalid, to silence the error
-  # See https://github.com/ohmyzsh/ohmyzsh/commit/dd1a7269#commitcomment-39003489
-  tee -a "$ZSH_COMPDUMP" &>/dev/null <<EOF
-
-$zcompdump_revision
-$zcompdump_fpath
-EOF
-fi
-unset zcompdump_revision zcompdump_fpath zcompdump_refresh
-
-# zcompile the completion dump file if the .zwc is older or missing.
-if command mkdir "${ZSH_COMPDUMP}.lock" 2>/dev/null; then
-  zrecompile -q -p "$ZSH_COMPDUMP"
-  command rm -rf "$ZSH_COMPDUMP.zwc.old" "${ZSH_COMPDUMP}.lock"
-fi
-
-_omz_source() {
-  local context filepath="$1"
-
-  # Construct zstyle context based on path
-  case "$filepath" in
-  lib/*) context="lib:${filepath:t:r}" ;;         # :t = lib_name.zsh, :r = lib_name
-  plugins/*) context="plugins:${filepath:h:t}" ;; # :h = plugins/plugin_name, :t = plugin_name
-  esac
-
-  local disable_aliases=0
-  zstyle -T ":omz:${context}" aliases || disable_aliases=1
-
-  # Back up alias names prior to sourcing
-  local -A aliases_pre galiases_pre
-  if (( disable_aliases )); then
-    aliases_pre=("${(@kv)aliases}")
-    galiases_pre=("${(@kv)galiases}")
-  fi
-
-  # Source file from $ZSH_CUSTOM if it exists, otherwise from $ZSH
-  if [[ -f "$ZSH_CUSTOM/$filepath" ]]; then
-    source "$ZSH_CUSTOM/$filepath"
-  elif [[ -f "$ZSH/$filepath" ]]; then
-    source "$ZSH/$filepath"
-  fi
-
-  # Unset all aliases that don't appear in the backed up list of aliases
-  if (( disable_aliases )); then
-    if (( #aliases_pre )); then
-      aliases=("${(@kv)aliases_pre}")
-    else
-      (( #aliases )) && unalias "${(@k)aliases}"
-    fi
-    if (( #galiases_pre )); then
-      galiases=("${(@kv)galiases_pre}")
-    else
-      (( #galiases )) && unalias "${(@k)galiases}"
-    fi
-  fi
-}
-
-# Load all of the lib files in ~/.oh-my-zsh/lib that end in .zsh
-# TIP: Add files you don't want in git to .gitignore
-for lib_file ("$ZSH"/lib/*.zsh); do
-  _omz_source "lib/${lib_file:t}"
-done
-unset lib_file
-
-# Load all of the plugins that were defined in ~/.zshrc
-for plugin ($plugins); do
-  _omz_source "plugins/$plugin/$plugin.plugin.zsh"
-done
-unset plugin
-
-# Load all of your custom configurations from custom/
-for config_file ("$ZSH_CUSTOM"/*.zsh(N)); do
-  source "$config_file"
-done
-unset config_file
-
-# Load the theme
-is_theme() {
-  local base_dir=$1
-  local name=$2
-  builtin test -f $base_dir/$name.zsh-theme
-}
-
-if [[ -n "$ZSH_THEME" ]]; then
-  if is_theme "$ZSH_CUSTOM" "$ZSH_THEME"; then
-    source "$ZSH_CUSTOM/$ZSH_THEME.zsh-theme"
-  elif is_theme "$ZSH_CUSTOM/themes" "$ZSH_THEME"; then
-    source "$ZSH_CUSTOM/themes/$ZSH_THEME.zsh-theme"
-  elif is_theme "$ZSH/themes" "$ZSH_THEME"; then
-    source "$ZSH/themes/$ZSH_THEME.zsh-theme"
-  else
-    echo "[oh-my-zsh] theme '$ZSH_THEME' not found"
-  fi
-fi
-
-# set completion colors to be the same as `ls`, after theme has been loaded
-[[ -z "$LS_COLORS" ]] || zstyle ':completion:*' list-colors "${(s.:.)LS_COLORS}"

.p10k.zsh

@@ -1,199 +0,0 @@
-# Generated by Powerlevel10k configuration wizard on 2024-05-17 at 10:37 CEST.
-# Based on romkatv/powerlevel10k/config/p10k-pure.zsh, checksum 35142.
-# Wizard options: nerdfont-v3 + powerline, small icons, pure, original, rprompt,
-# 2 lines, sparse, transient_prompt, instant_prompt=verbose.
-# Type `p10k configure` to generate another config.
-#
-# Config file for Powerlevel10k with the style of Pure (https://github.com/sindresorhus/pure).
-#
-# Differences from Pure:
-#
-#   - Git:
-#     - `@c4d3ec2c` instead of something like `v1.4.0~11` when in detached HEAD state.
-#     - No automatic `git fetch` (the same as in Pure with `PURE_GIT_PULL=0`).
-#
-# Apart from the differences listed above, the replication of Pure prompt is exact. This includes
-# even the questionable parts. For example, just like in Pure, there is no indication of Git status
-# being stale; prompt symbol is the same in command, visual and overwrite vi modes; when prompt
-# doesn't fit on one line, it wraps around with no attempt to shorten it.
-#
-# If you like the general style of Pure but not particularly attached to all its quirks, type
-# `p10k configure` and pick "Lean" style. This will give you slick minimalist prompt while taking
-# advantage of Powerlevel10k features that aren't present in Pure.
-
-# Temporarily change options.
-'builtin' 'local' '-a' 'p10k_config_opts'
-[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
-[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
-[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
-'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'
-
-() {
-  emulate -L zsh -o extended_glob
-
-  # Unset all configuration options.
-  unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR'
-
-  # Zsh >= 5.1 is required.
-  [[ $ZSH_VERSION == (5.<1->*|<6->.*) ]] || return
-
-  # Prompt colors.
-  local grey='242'
-  local red='1'
-  local yellow='3'
-  local blue='4'
-  local magenta='5'
-  local cyan='6'
-  local white='7'
-
-  # Left prompt segments.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
-    # =========================[ Line #1 ]=========================
-    # context                 # user@host
-    dir                       # current directory
-    vcs                       # git status
-    # command_execution_time  # previous command duration
-    # =========================[ Line #2 ]=========================
-    newline                   # \n
-    # virtualenv              # python virtual environment
-    prompt_char               # prompt symbol
-  )
-
-  # Right prompt segments.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
-    # =========================[ Line #1 ]=========================
-    command_execution_time    # previous command duration
-    virtualenv                # python virtual environment
-    context                   # user@host
-    # time                    # current time
-    # =========================[ Line #2 ]=========================
-    newline                   # \n
-  )
-
-  # Basic style options that define the overall prompt look.
-  typeset -g POWERLEVEL9K_BACKGROUND=                            # transparent background
-  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE=  # no surrounding whitespace
-  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' '  # separate segments with a space
-  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR=        # no end-of-line symbol
-  typeset -g POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION=           # no segment icons
-
-  # Add an empty line before each prompt except the first. This doesn't emulate the bug
-  # in Pure that makes prompt drift down whenever you use the Alt-C binding from fzf or similar.
-  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true
-
-  # Magenta prompt symbol if the last command succeeded.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS}_FOREGROUND=$magenta
-  # Red prompt symbol if the last command failed.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS}_FOREGROUND=$red
-  # Default prompt symbol.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
-  # Prompt symbol in command vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
-  # Prompt symbol in visual vi mode is the same as in command mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='❮'
-  # Prompt symbol in overwrite vi mode is the same as in command mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=false
-
-  # Grey Python Virtual Environment.
-  typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=$grey
-  # Don't show Python version.
-  typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false
-  typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER=
-
-  # Blue current directory.
-  typeset -g POWERLEVEL9K_DIR_FOREGROUND=$blue
-
-  # Context format when root: user@host. The first part white, the rest grey.
-  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE="%F{$white}%n%f%F{$grey}@%m%f"
-  # Context format when not root: user@host. The whole thing grey.
-  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE="%F{$grey}%n@%m%f"
-  # Don't show context unless root or in SSH.
-  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_CONTENT_EXPANSION=
-
-  # Show previous command duration only if it's >= 5s.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=5
-  # Don't show fractional seconds. Thus, 7s rather than 7.3s.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
-  # Duration format: 1d 2h 3m 4s.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
-  # Yellow previous command duration.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=$yellow
-
-  # Grey Git prompt. This makes stale prompts indistinguishable from up-to-date ones.
-  typeset -g POWERLEVEL9K_VCS_FOREGROUND=$grey
-
-  # Disable async loading indicator to make directories that aren't Git repositories
-  # indistinguishable from large Git repositories without known state.
-  typeset -g POWERLEVEL9K_VCS_LOADING_TEXT=
-
-  # Don't wait for Git status even for a millisecond, so that prompt always updates
-  # asynchronously when Git state changes.
-  typeset -g POWERLEVEL9K_VCS_MAX_SYNC_LATENCY_SECONDS=0
-
-  # Cyan ahead/behind arrows.
-  typeset -g POWERLEVEL9K_VCS_{INCOMING,OUTGOING}_CHANGESFORMAT_FOREGROUND=$cyan
-  # Don't show remote branch, current tag or stashes.
-  typeset -g POWERLEVEL9K_VCS_GIT_HOOKS=(vcs-detect-changes git-untracked git-aheadbehind)
-  # Don't show the branch icon.
-  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=
-  # When in detached HEAD state, show @commit where branch normally goes.
-  typeset -g POWERLEVEL9K_VCS_COMMIT_ICON='@'
-  # Don't show staged, unstaged, untracked indicators.
-  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED}_ICON=
-  # Show '*' when there are staged, unstaged or untracked files.
-  typeset -g POWERLEVEL9K_VCS_DIRTY_ICON='*'
-  # Show '⇣' if local branch is behind remote.
-  typeset -g POWERLEVEL9K_VCS_INCOMING_CHANGES_ICON=':⇣'
-  # Show '⇡' if local branch is ahead of remote.
-  typeset -g POWERLEVEL9K_VCS_OUTGOING_CHANGES_ICON=':⇡'
-  # Don't show the number of commits next to the ahead/behind arrows.
-  typeset -g POWERLEVEL9K_VCS_{COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=1
-  # Remove space between '⇣' and '⇡' and all trailing spaces.
-  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${${${P9K_CONTENT/⇣* :⇡/⇣⇡}// }//:/ }'
-
-  # Grey current time.
-  typeset -g POWERLEVEL9K_TIME_FOREGROUND=$grey
-  # Format for the current time: 09:51:02. See `man 3 strftime`.
-  typeset -g POWERLEVEL9K_TIME_FORMAT='%D{%H:%M:%S}'
-  # If set to true, time will update when you hit enter. This way prompts for the past
-  # commands will contain the start times of their commands rather than the end times of
-  # their preceding commands.
-  typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=false
-
-  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
-  # when accepting a command line. Supported values:
-  #
-  #   - off:      Don't change prompt when accepting a command line.
-  #   - always:   Trim down prompt when accepting a command line.
-  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
-  #               typed after changing current working directory.
-  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=always
-
-  # Instant prompt mode.
-  #
-  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
-  #              it incompatible with your zsh configuration files.
-  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
-  #              during zsh initialization. Choose this if you've read and understood
-  #              https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
-  #   - verbose: Enable instant prompt and print a warning when detecting console output during
-  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
-  #              seen the warning, or if you are unsure what this all means.
-  typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose
-
-  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
-  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
-  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
-  # really need it.
-  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true
-
-  # If p10k is already loaded, reload configuration.
-  # This works even with POWERLEVEL9K_DISABLE_HOT_RELOAD=true.
-  (( ! $+functions[p10k] )) || p10k reload
-}
-
-# Tell `p10k configure` which file it should overwrite.
-typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a}
-
-(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
-'builtin' 'unset' 'p10k_config_opts'

.zshrc

@@ -1,126 +0,0 @@
-# If you come from bash you might have to change your $PATH.
-# export PATH=$HOME/bin:$HOME/.local/bin:/usr/local/bin:$PATH
-export PATH="$HOME/.local/bin:$PATH"
-
-# Path to your Oh My Zsh installation.
-export ZSH="$HOME/.oh-my-zsh"
-export FZF_DEFAULT_OPTS=" \
---color=bg+:#363A4F,bg:#24273A,spinner:#F4DBD6,hl:#ED8796 \
---color=fg:#CAD3F5,header:#ED8796,info:#C6A0F6,pointer:#F4DBD6 \
---color=marker:#B7BDF8,fg+:#CAD3F5,prompt:#C6A0F6,hl+:#ED8796 \
---color=selected-bg:#494D64 \
---color=border:#6E738D,label:#CAD3F5"
-
-# Set name of the theme to load --- if set to "random", it will
-# load a random theme each time Oh My Zsh is loaded, in which case,
-# to know which specific one was loaded, run: echo $RANDOM_THEME
-# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
-ZSH_THEME="robbyrussell"
-
-# Set list of themes to pick from when loading at random
-# Setting this variable when ZSH_THEME=random will cause zsh to load
-# a theme from this variable instead of looking in $ZSH/themes/
-# If set to an empty array, this variable will have no effect.
-# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
-
-# Uncomment the following line to use case-sensitive completion.
-# CASE_SENSITIVE="true"
-
-# Uncomment the following line to use hyphen-insensitive completion.
-# Case-sensitive completion must be off. _ and - will be interchangeable.
-# HYPHEN_INSENSITIVE="true"
-
-# Uncomment one of the following lines to change the auto-update behavior
-# zstyle ':omz:update' mode disabled  # disable automatic updates
-# zstyle ':omz:update' mode auto      # update automatically without asking
-# zstyle ':omz:update' mode reminder  # just remind me to update when it's time
-
-# Uncomment the following line to change how often to auto-update (in days).
-# zstyle ':omz:update' frequency 13
-
-# Uncomment the following line if pasting URLs and other text is messed up.
-# DISABLE_MAGIC_FUNCTIONS="true"
-
-# Uncomment the following line to disable colors in ls.
-# DISABLE_LS_COLORS="true"
-
-# Uncomment the following line to disable auto-setting terminal title.
-# DISABLE_AUTO_TITLE="true"
-
-# Uncomment the following line to enable command auto-correction.
-# ENABLE_CORRECTION="true"
-
-# Uncomment the following line to display red dots whilst waiting for completion.
-# You can also set it to another string to have that shown instead of the default red dots.
-# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
-# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
-# COMPLETION_WAITING_DOTS="true"
-
-# Uncomment the following line if you want to disable marking untracked files
-# under VCS as dirty. This makes repository status check for large repositories
-# much, much faster.
-# DISABLE_UNTRACKED_FILES_DIRTY="true"
-
-# Uncomment the following line if you want to change the command execution time
-# stamp shown in the history command output.
-# You can set one of the optional three formats:
-# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
-# or set a custom format using the strftime function format specifications,
-# see 'man strftime' for details.
-# HIST_STAMPS="mm/dd/yyyy"
-
-# Would you like to use another custom folder than $ZSH/custom?
-# ZSH_CUSTOM=/path/to/new-custom-folder
-
-# Which plugins would you like to load?
-# Standard plugins can be found in $ZSH/plugins/
-# Custom plugins may be added to $ZSH_CUSTOM/plugins/
-# Example format: plugins=(rails git textmate ruby lighthouse)
-# Add wisely, as too many plugins slow down shell startup.
-plugins=(
-  git
-  fast-syntax-highlighting
-  zsh-autosuggestions
-)
-
-source $ZSH/oh-my-zsh.sh
-
-# User configuration
-
-# export MANPATH="/usr/local/man:$MANPATH"
-
-# You may need to manually set your language environment
-# export LANG=en_US.UTF-8
-
-# Preferred editor for local and remote sessions
-# if [[ -n $SSH_CONNECTION ]]; then
-#   export EDITOR='vim'
-# else
-#   export EDITOR='nvim'
-# fi
-
-source ~/.config/zsh/config
-
-export EDITOR="nvim"
-
-# GPG Key - uncommunt if needed
-export GPG_TTY=$(tty)
-
-# Compilation flags
-# export ARCHFLAGS="-arch $(uname -m)"
-
-# Set personal aliases, overriding those provided by Oh My Zsh libs,
-# plugins, and themes. Aliases can be placed here, though Oh My Zsh
-# users are encouraged to define aliases within a top-level file in
-# the $ZSH_CUSTOM folder, with .zsh extension. Examples:
-# - $ZSH_CUSTOM/aliases.zsh
-# - $ZSH_CUSTOM/macos.zsh
-# For a full list of active aliases, run `alias`.
-#
-# Example aliases
-# alias zshconfig="mate ~/.zshrc"
-
-source ~/.config/zsh/aliases
-
-eval "$(zoxide init --cmd cd zsh)"
-eval "$(/home/thomas/.local/bin/mise activate zsh --shims)"

README.md

@@ -1,61 +1,15 @@
 # Dotfiles
 🏠 - Personal Dotfiles (Managed by GNU Stow)
 
-![1](https://github.com/user-attachments/assets/692a80a3-756a-4118-9350-47acc3e37710)
-![2](https://github.com/user-attachments/assets/494c8923-c580-49d6-9ca7-950a8b6b06ba)
-![3](https://github.com/user-attachments/assets/34735b0c-7a0e-40bf-86d4-84498e740fc3)
+## Arch
+[install here](https://github.com/Thomas-Philippot/dotfiles/tree/arch)
 
+### Specs
+- Azerty Keyboard layout and french system language.
+- Desktop environment. (no battery, wifi or brightness controls)
 
-## Overview
-
-- **DE**: [Hyprland](https://hyprland.com)
-- **OS**: [Fedora Linux](https://fedoraproject.org/fr/)
-- **Shell**: ZSH
-  - **Framework**: [oh-my-zsh](https://ohmyz.sh/)
-  - **Prompt**: [p10k](https://github.com/romkatv/powerlevel10k)
-- **Applications**:
-  - **Spotify**: [Spicetify](https://spicetify.app/)
-  - **Discord**: [vesktop](https://vesktop.dev)
-- **Terminal**: [kitty](https://github.com/kovidgoyal/kitty)
-- **Editor**: [Neovim](https://github.com/neovim/neovim/) (using [LazyNvim](https://www.lazyvim.org/) configuration)
-- **Browser**: [Zen](https://zen-browser.app/)
-- **Fonts**: Jetbrains Mono, Fira Code Mono [Nerd Font](https://www.nerdfonts.com/)
-- **Icons**:
-  - **Cursor**: [Catppuccin Cursor](https://github.com/catppuccin/cursors), [Phinger Cursors](https://github.com/phisch/phinger-cursors)
-- **Colorscheme**: [Catppuccin](https://github.com/catppuccin/catppuccin) Dark : Macchiato / Light : Latte
-- **Keyboard Layout**: FR-fr (AZERTY)
-- **System Language**: English
-
-## Installation
-
-### Prerequisites
-
-- [Stow](https://www.gnu.org/software/stow/)
-- [Git](https://git-scm.com)
-- [Zoxide](https://github.com/ajeetdsouza/zoxide)
-- [Eza](https://eza.rocks)
-- [Hyprshot](https://github.com/Gustash/hyprshot)
-- [Noctalia](https://noctalia.dev)
-- [wl-clipboard](https://github.com/bugaevc/wl-clipboard)
-
-clone the repo into your `$HOME` folder and let stow do its magic !
-
-````
-git clone https://github.com/Thomas-Philippot/dotfiles
-cd dotfiles
-stow .
-``````
-
-all the files should now be simlinked to your $HOME folder
-
-### Theme switcher
-
-user the <kbd>SUPER</kbd> + <kbd>T</kbd> shortcut to switch between light and dark theme
-
-### Issues
-
-bat might not apply the catppuccin theme at launch, because you need to rebuild it's cache
-
-```
-bat cache --build
-```
+## Ubuntu 24.04
+[install here](https://github.com/Thomas-Philippot/dotfiles/tree/ubuntu-24)
+### Specs
+- Us keyboard layout and English system language.
+- Laptop environment. (battery, wifi and brightness controls)